Loading…
Loading…
Tender Value
₹50 L
EMD Value
₹50,000
Closing Date
8 Jun 2026, 6:00 pm2d left
Assistant Manager (North West Zone)
Necessary Repairing Works in Muni. Building like Community Hall, Cremetorium, Health Maleria Office, and other Municipal Building Ognaj Gam, Mahatma gandhi vasahat, vasantnagr township, TP-32 , Gota gam and other different places in Gota Ward in North West Zone.
310542
T.NOTICE-01 TENDER-108
Open
Miscellaneous Goods
Ahmedabad
3 documents required · 3 mandatory
₹1,500
Municipal Commissioner, Ahmedabad
₹50,000
4 Jun 2026
4 Jun 2026
4 Jun 2026
8 Jun 2026
4 Jun 2026
Excavation for foundation up to1.5 m depth including
sorting out and stacking of useful materials and
disposing of theexcavated stuff upto 50 Meter
lead.(A)Loose or soft soil
1 Upto 1.5 mt Depth 115.92 Cmt
1 1.5 to 3.0 mt.depth 158.4 Cmt
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
2 1 layers not exceeding 20 cm. in depth 129.1 Cmt
consolidation each deposited layer by ramming and
Providing and laying cement concrete1:5:10
(1-Cement: 5- coarses sand and:10-hand broken
3 1 stone aggregates 40mm nominal size) and 2492.51 Cmt
curing complete excluding cost of formworkin (A)
Foundation and Plinth.
Providing and laying cement concrete1:4:8 (1-
Cement: 4- coarses and:8 hand broken stone
4 1 aggregates 40mm nominal size) and curing 2653.67 Cmt
complete excluding cost of formworkin (A)
Foundation and Plinth
Providing and laying cement concrete 1:3:6 (1-
Cement : 3- coarse sand : 6- hand broken stone
5 1 aggregates 40 mmnominal size) and curing complete 2976 Cmt
excluding cost of formwork in (A) Foundation and
Providing and laying cement concrete 1:3:6
(1-Cement:3-coarse sand:6- crushed stone
6 1 aggregates 20mm nominal size) and curing 4006.15 Cmt
complete including cost of formwork in (A) wall
Providing and laying cement concrete work
1:2:4 ((1-Cement:2- coarse sand:4-graded
7 aggregates 20mm nominal size) curing
complete excluding cost of formwork and
Foundations, footings, base or columns and mass
Slabs, landing, shelves, balconies, lintels, beams,
b 1 girders and cantilivers upto floor two level 4012.47 Cmt
Independent piers, columns, and pillars, upto floor two
Provdg. & laying cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregates
20 mm nominal size) for reinforced concrete
chhajjas not exceeding 10 cm. thickness upto
floors two level including finishing the exposed
8 1 surfaces with cement mortar 1:3 (1 cement : 3 find 6487.07 Cu.M.
sand) to give a smooth and even surface centering
and form work and curing complete excluding
cost of reinforcement.
Providing and laying controlled cement concrete
/ Ready Mix Concrete of M-200 and curing
9 complete, excluding the cost of form work
and reinforcement for reinforced concrete work in:
Foundations, footings, base of columns, and mass
Walls from top of foundations /level up to floor Two
Slabs,landing,shelves,Balconies Lintels, Beams, Girders
and Cantilever upto floor
Columns, pillars, posts, and struts, up to floor two level.
Staircase up to floor two level. (excluding landing)
(K) 0 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.
Providing and Laying ordinary cement
concrete 1:2:4 (1-Cement 2- coarsesand: 4-
graded stone aggregates 20 mm nominal size) and
finishing smooth with curing etc. complete including
10 1 the cost of form work but excluding the cost of 6241.78 Cum
reinforsement for R.C.C work in (iv) Slabs
having more than 13 cm and upto 15 cm.thickness
Providing and Laying ordinary cement
concrete 1:2:4 (1-Cement 2- coarsesand: 4-
graded stone aggregates 20 mm nominal size) and
finishing smooth with curing etc. complete including
11a 1 the cost of form work but excluding the cost of 7401.59 Cum
reinforsement for R.C.C work in (iv) Slabs having
more than 8 cm and upto 10 cm.thickness
Brick work using common burnt clay
building bricks having crushing strength not
12 less than 35kg./Sq.Cm.in foundation and plinth
in Cement Mortar1:6 (1-Cement :6 - fine
100 (A) Conventional (upto 10 ton) 3981.21 Cmt
1 B) Modular 4241.7 Cmt
Extra Rate for brickwork in Above Item for super
13 structure above plinth level upto floor two level (B)
a 100 (A) Conventional 272.25 Cmt
b 1 B) Modular 262.35 Cmt
C) above floor two level Item No. 2(6.13) (A) Modular Per Floor
c 50 42.66 Per Cum
D) above floor two level Item No. 2(6.13) (B) Per Floor
d 50 40.09 Per Cum
Half brick masonry in common brunt clay
building bricks having crushing strength not less than
14 20 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 583.49 Smt
coarse sand ) in foundation and Plinth
conventional brickwork
Extra for half brick masonry in super
15 20 structure above plinth level upto floor two 433.4 Smt
level (B) conventional
Providing form work in ordinary timber planking
so as to give a rough finish including centering,
shuttering, strutting and propping etc. height of
propping and centering below supporting floor to celling
16 not exceeding 4 M & removal of the same for
in situ reinforced or plain concrete work upto floor
Foundation, footings, bases of columns etc. and
(B) Flat surfaces such as soffits of supspened floors
b 250 slabs Landings and the like. (1) Floors etc. upto 200 mm 252 Smt
(B) Flat surfaces such as soffits of suspended floor roof
c 250 slabs Landings and the like. (2) Floors etc. above 270.9 Smt
200mm in thickness.
Vertical surface such as walls (any thickness)
d 100 partitions and the like including attached buttresses & 229.95 Smt
string course & the like.
(ii) Sides And Soffits Of Beam, Haunchings
e 100 Cantilevers, Girders, Bressumers And Lintels Not 192.15 Smt
Exceeding 1 M In Depth.
(G) Columns PillarsPosts and struts. (1) Square
Rectangular Polygonal in plan.
g 50 (2) Circular or curved in plan. 422.1 Smt
(H) (2) Sides and soffits of Beams Beam
h 100 Haunchings canti-levers Girders Bressumers and 259.88 Smt
Lintels exceeding 1M.in Depth.
Providing and fixing 35 mm thick panelled,
glazed or panelled and glazed shutters for Doors
windows and clear story windows including
17 anodised alluminium But hinges with necessary
screws and indian teak wood shutters with.
a 1 (A) Plywood sheet panels. 3459.09 Smt
b 1 (B) Particle board panels 3464.51 Smt
c 1 (C)Hard board panels. 3433.65 Smt
d 1 (D) Asbestos sheet panels. 3406.53 Smt
Providing and fixing 25 mm thick shutters for
cup boards etc. including black enamelled M.S.
18 1 butt hinges with necessary screws.(A) Indian teak 3006.75 Smt
wood. (i) Fully Panelled.
Providing and fixing 25 mm thick shutters for
cupboards etc. including anodised alluminiu butt
hinges with necessary screws. (A) Indian teak wood. (ii)
Providing and fixing 25 mm thick shutters for
cupboards etc. including anodised alluminiu butt
hinges with necessary screws. (A) Indian teak wood. (ii)
Partly panelled and partl glazed.
Structural steel work ( Confirming to IS 4923- 1997) riveted,
bolted or welded in builtup for all type sections, in framed work,
including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete as per the
19 1000 structural designs and 115.73 kg
directions of Engineer in charge.Column ( 122 x 61 x 3.6mm ) (R
and B SOR FOR BUILDING WORKS AHMEDABAD CITY
2021_22) Item Code 20054)
Providing and fixing glazed louvered glass
windows and ventilators with teak wood frame
cm. x 7 cm. size including 3 coats of oil painting to
wood work etc.complete.
Providing and fixing glazed louvered glass
windows and ventilators with teak wood frame
cm.x7 cm. size including 3 coats of oil painting to
21 1 wood work etc.complete.with wooden louvers plank 4332.47 Smt
Providing and fixing 35 mm thick shutters for
Doors, windows and clere story windows
including Indian teak wood frames 10 cm x 7 cm.
22 1 size including anodized alluminium fixtures and 4595.06 Smt
fastenings including primer coat of approved
quality and two coats of oil painting etc, complete.(ii)
Providing and fixing 35 mm thick shutters for
Doors, windows and clere story windows
including Indian teak wood frames 10 cm x 7 cm.
size including black enamelled iron oxidixed
23 1 fixtures and fastenings including primer coat of 5285.45 Smt
approved quality and two coats of oil painting etc,
complete.(ii) Fully Panelled.
Providing and fixing 35 mm thick shutters for Doors,
windows and clerestory windows including Indian teak
wood frames 10 cm x 7 cm. size including anodized
a 1 alluminium fixtures and fastenings including primer 4940.25 Smt
coat of approved quality and two coats of oil painting
etc, complete. (iii) Partly panelled and partly glazed.
Providing and fixing 30 mm thick FACTORY
MADE SOLID PANEL PVC DOOR SHUTTER
consisting of frame made out of M.S.tubes of
gauge thickness and size of 19 mm x 19 mm for stiles
and 15 mm x 15 mm for top and bottom rails.M.S.
frames hall have a coat of steel primers of
approved make and manufacture, M.S. frames hall be
covered with 5 mm thick heat moulded PVC ‘C’
channel of size 30 x 50 mm formings tiles, and
mm thick 75 mm wide PVC sheets for to prail, lock rail
and bottom rail on either side, and 10 mm (5 mm x 2)
24 2 thick, 20 mm wide cross PVC sheet as gap insert 1135.02 Smt
for top rail and bottom rail, Panelling of 5 stiles
and rails with 30 mm wide x 5 mm thick PVC sheet
beading on eighter side, and joined together with
solventcement adhesive,. An additional 5 mm thick
PVC strip of 20 mm width is to be stculkon the interiors
side of the ‘c’ channel using PVC
solvent cement adhesive etc. complete as per
direction of Engineer incharge, manufacture’s
specification and drawing.
Providing and fixing in position collapsible
steel shutters with vertical channels 20 x 10 x
mm braced with flat iron diagonal 20 x 5 mm size
with top and bottom rails T iron 40 x 40 x 6 mm with
25 2 38 mm dia steel pulleys complete with bolts, nuts, 5391.23 Sq.M.
locking arrangements, stoppers, handles,
including a priming coat of red lead paint &
Providing and fixing 1 mm thick M.S. sheet
sliding shutters with frame and diagonal braces
of 40x40x6 mm angle iron, 3.15 mm M.S.gusset
plates at Junctions and corners 25 mm dia.
26 2 pulley, 40x40x6 mm angle and T- iron guide 3652.12 Sqm
rail at top and bottom respactively with
handles, stoppers and locking agangement etc,
including applying a priming coat of red lead paint.
Providing & Fixing in position Alluminium doors
with frame using approved quality anodised
extruded alluminium section as approved
by Engg.in charge(Jindal alluminium) (a) Frame
sections 101.6x44.45 mm (b) Shutter bottom vertical
& top section 83.5x44.45 (wt.1.31 kg/mt.)(at
kg/mt) (c) Shutter bottom section at
27 2 114.3x44.45 mm at (1.37kg/mt) Shutter middle 2,900.00 Smt
section at 100x44.3 wt.(1.37 kg/mt) incl.providing
& installing 5 mm thick approved color
Acrylic sheet of standard quality fixed with
glazing chips on upper pannel & Laminated sheet
on lower pannel (wtt.0.13 kg/Rmt)
etc.comp.as direction of engg.in charge.
Providing and fixing extruded aluminum window
having extruded aluminum Colour r Powder Coated
section frame main outer size 127mm x 38.10mm x
1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track
member size 122.20mm x 31.75mm x 1.10mm @ Wt.
1.205 Kg/mt,vertical member of size 122.20mm x
31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding
28 2 shutters of horizontal member size 40mm x 18mm x 2119.14 Sq. M.
1.29mm @ wt.of 0.456Kg/mt,vertical member of size
40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with
5 mm thick transparent bronze colour tinted float glass
with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per
details etc complete for window.
Providing & Fixing in position Alluminium
vents with frame using approved anodised
extruded alluminium section as approved by
Engg. In charge.(Jindal alluminium) units
29 2 equivalent Approved Rate)Frame section of 1,950.00 Sq. M.
63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl.
Providing & Installing 5 mmthick approved color
Acrylic sheet of standard quality etc. comp.
Providing and fixing standared extruded of
alluminium section of size 63 mmx38.10 mmx1.2
mm (Jindal Section:2434, or equivalent @ Wt.0.643
30 2 Kg/mt) with colour anodized alluminium frame 1163.92 Sq. M.
for ventilation with 5 mm thick frosted glass as
details etc complete for Ventilation
Providing and fixing standared extruded of alluminium
section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg
/ Rmt with colour Powder Coated alluminium frame
Providing and laying 40 mm thick marble chips
flooring rubbed and polished (I.E.terrazo) to
granolithic finish with under layer 30 mm thick cement
concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded
stone aggregate 10 mm and down gauge) and
to player 10 mm thick with white, black or white and
blak marble cihps of required sizes from 1 mm to 4 mm
32 1 nominal size laid in cement marble powder mix 3:1 (3- 811.13 Sqm
Cement:1-Marble powder by weight) in
proportion of 4:7 (4- Cement: 7-marble chips
by volume) (C) Medium Shade pigment with
approx 50% white cement and 50% ordinary
cement (In top layer only) (upto 10 ton)
Providing and laying marble chips skirting
(Terrazo) or dedo rubbed, and polished to
Granolithic finish to player 6 mm white, black or
white and black marble chips of size from
smallest to 4 mm nominal size laid in cement
33 1 marble powder mix 3:1 (3-Cement: 1 marble 869.4 Sqm
powder by weight) in proportion of 4:7 (4-cement
marble powder mix: 7-marble chips by volume) (B)
Light shade pigment with white cement (In top layer
Providing and laying white glazed tiles 6mm thick in
flooring treads of steps andlanding laid on a bed of
12mm thick cement mortar 1:3 (1-cement : 3-coarse
Providing and laying Ceramic tiles 6 mm thick in
flooring treads of steps and landing laid on a bed of
35 5 12 mm thick cement mortar 1:3 (1- cement :3-coarses 960.47 Sq.M.
and) finishing with flush pointing in white cement.
Providing & Fixing 20 mm thick Mirror
Polished Decorative Granite Board with
Computerised Golden Letters Discription as
36 1 per instructions of engg. in charge to M.S. frame 4,304.00 No.
structure for Inaugaration & Public Handover
Function (N.S.)
Providing and laying Vitrified tiles 8 to 10 mm
thick, 36''x36'' in flooring treads of steps and
37 1 landing laid on a bed of 12 mm thick 1469.91 Sq.M.
cement mortar 1:3 (1-cement:3-coarses and)
finishing with flush pointing inwhite cement.
Providing and laying Vitrified tiles 8 to 10 mm thick,
24''x24'' in skrting risers of steps and dedo on 10 mm
38 1 thick cement plaster 1:3 (1- cement: 3-coarse 1130.15 Sqm
sand) and jointed with white cement slurry
Providing and laying Vitrified tiles 8 to 10 mm
thick, in skrting risers of steps and dedo on
39 1 mm thick cement plaster 1:3 (1-cement:3- 1523.61 Sqm
coarse sand) and jointed with white cement slurry
Providing and laying 24" x 24" vitrified
Tiles 8 to 10 mm th. Double Charged
gloosy/ Matt of Approved make as approved
by Adl.C.E. / consultants in flooring over
40 1 mm thick cement mortar 1:6 (1 cement : 6 1,527.00 Sq. M.
coarse sand)on new surface& jointed with colour
cement slurry incl with flush pointing & cleaning
the surface etc. comp.
Providing and laying 24" x 24" vitrified 8 to
10 mm th.Double Charged Gloosy / Matt tiles
of Approved make as Approved by Adl.C.E. /
Consultants for upto 10 cm high skirting as
41 1 approved by Engineer in charge over 10 mm thick 165 Rmt
cement mortar 1:6 (1 cement : 6 coarse sand)on new
surface& jointed with colour cement slurry incl with
flush pointing & cleaning the surface etc. comp.
Providing and laying polished Kota stone slab
flooring over 20 mm (Average) thick base of
cement mortar 1:6 (1-cement:6-coarses and) or
L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid
42 350 over and jointed with grey cement slurry mixed 982.83 Sq.M.
with pigment to match the shade of slab
including rubbing and polishing etc. complete. (A)
Providing and laying marble stone slab flooring over
20mm (average)base of cement mortar 1:6 (1-cement :
coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse
43 1 sand) laid and jointed with gray cement slurry including 2194.63 Sq.M.
rubbing and polishing complete. (A)Marble slab 25mm
Providing and laying polished Kota stone slab
flooring over 20 mm (Average) thick base of
cement mortar 1:6 (1-cement:6-coarses and) or
44 700 L.M.1.1.5 laid over and jointed with grey 1085.48 Sq.M.
cement slurry including rubbing and polishing
etc.complete. (B) 30 mm thick
Providing and laying polished kota stone slab 25 mm
thick in risers of steps, skirting Dedo and pillars laid
on 10 mm thick cement mortar 1:3 (1-Cement :3
45 1 coarses and) and jointed with gray cement 1176.03 Sq.M.
slury mixed with pigment to match the shade of
slab including rubbing and polishing etc.complete.
Providing and laying cement concrete
flooring (I.P.S.) 1:2:4 (1-cement: 2-coarses and:4-
46 1 graded stone aggregate 20mm nominal size) 297.68 Sq.M.
laid in one layer and finished with a floating
coat of neat cement. (A) 40mm thick.
Providing and laying cement concrete
flooring 1:2:4 (1-cement: 2-coarse sand:4-graded
47 1 stone aggregate 20mm nominal size) laid in one 348.08 Sq.M.
layer and finished with a floating coat of neat
cement. (B) 50mm thick.
Providing and laying broken china mosaic flooring
for terrace using 12 mm to 20 mm broken pieces of
glazed tiles to be laid over cement mortar 1:3 to plain or
slope and to be tempered to bring mortar creme out
48 1 upto surface using white cement including 739.89 Sqm
rounding off junctions and extending them up
to15 cm along the wall, clearing with water and
oxalic acid etc.as directed.
Providing and laying coloured glazed tiles
of the size 300 mmx200 mmx8 mm/300
mmx450 mmx8 mm in skirting, risers of steps
49 1 and dedo on10 mm. thick cement plaster 1:3 1426.95 Sqm
(1cement: 3 coarse sand) & jointed with white
Providing corrugated G.I. sheet of class-3 roofing fixed with
glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with
bitumen and G.I. limpet washer or G.I. limpet washer. filled with
50 100 white lead complete excluding the cost of purlins, Rafters and 793.1 Sqm
Trusses.(1) 0.80 mm thick sheet. (R and B SOR FOR BUILDING
WORKS AHMEDABAD CITY 2021_22) Item Code 15001A)
Providing and fixing 150 mm wide 450 mm over
all semi circular plain G.I.sheet class-3 gutter with
Iron brackets 40 mmx3 mm size Bolts, Nuts, washers
51 1 etc. including making necessary connection with rain 555.71 Sqm
water pipes. (i) 0.80 mm thick Sheet.
Providing and fixing five courses water profing
treatment with bitumen felt consisting of second
and fourth course of blown/ bitumen or/and
residual bitumen applied hot at 1.2 kg.per
Sq.M.of area for each course and first course
with fibre base bitunen saturated under lay type
52 1 land third course with fibre base self finished felt type 466.84 Sqm
2 grade 1 and fifth and final course of stone grit
mm and down size or pea sizes gravel spread
at 0.008 Cu.Metre/Sq.metre preparation of
surface excluding grading complete.
Providing and fixing on wall face C.I. Rain
water pipe including filling the joints with spun
53 1 yarn soaked in neat cement slurry and cement 283.62 Rmt
mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm
Providing 15 mm thick cement plaster in single
coat on Rough (Similar) side of single or half brick
54 200 walls for interior plastering up to floor two 174.83 Sqm
level and finished even and smooth in (i) Cement
mortar 1:3 (1-cement :3-sand)
Providing 20mm thick sand faced cement plaster on
walls upto height 10 metres above ground level
consisting of 12mm thick backing coat of C.M. 1:3 (1-
55 200 cement : 3- sand) and 8mm thick finishing coat of C.M. 297.68 Sqm
1:1 (1-cement : 1-sand) etc. complete.
Colour washing with lime on wall surface (two
coats) over and including a primary coat of white
56 1000 washing to give an even shade after through 12.29 Sqm
brooming the surface to remove all dirt, dust,
mortar drops and other foreigh matter.
Removing dry or oil bound distemper by
a washing and scraping and sand papering the
57 1 wall surface smooth including necessary repairs 11.19 Sqm
to scratches complete.
Distempering with dry distemper of approved brand
and manufacture (two coats) and of required shade
on wall surfaces of given an even shade, over
58 1 and including a priming coat of whiting after 46.94 Sqm
thoroughly brooming the surface free from mortar
dropping and other foreign matter.
Distempeing (Two coats) with oil bound
distemper of approved brand and manufacture
and of required shade on wall surfaces to give
an even shade, over and including a priming
coat with distemper primer of approved brand
59 1 and manufacture after thoroughly brushing the 76.08 Sqm
surface free from mortar dropping and other
foreign matter and also including preparing
the surface even and sand papered smooth.
Extra Coat for Above Item over above for
60 1 every subsequent coat of approved brand and 30.09 Sqm
Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
61 850 including throughly brushing the surface free 78.44 Sqm
from mortar droppings and other foreign matter and
sand papered smooth.
Extra over item for every sub sequent coat of wall
62 750 painting with plastic emulsion paint of approved brand 33.39 Sqm
Extra over item for painting with plastic emulsion paint
62 a 750 of approved brand on ceilings and sloping roofs. 5.36 smt
Applying priming coat over new steel and
other metel surface after and including preparing
the surface by throughly cleaning, oil, grease, dirt
63 1000 and other foreign matter and scoured with 34.34 Sqm
brushes fine steel wood, scrapers and sand paper
with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat)
on new steel and other metal surface with
enamel paint, brushing, interior to give an even
64 1000 shade including cleaning the surface an even shade 86.94 Sqm
including cleaning the surface of all dirt, dust and other
foreign matter.
Painting one coats (excluding priming coat) on
previously painted steel and other metal surface with
65 1 enamel paint, brushing to give an even shade 54.35 Sqm
including cleaning the surface of all dirt, dust and
other foreign matter.
66 1 Extra over item for every sub sequent coat of paint. 50.4 Sqm
Painting two coats (excluding priming coat)
on new steel and other metal surface with
67 1 synthetic enamel paint, brushing to give an even 64.66 Sqm
shade including cleaning the surfaceofalldirt,dust and
other foreign matter.
Painting one coats (excluding priming coat) on
previously printed steel and other metal surface with
68 1 synthetic enamel paint, brushing to give an even 43.79 Sqm
shade including cleaning the surface of all dirt, dust and
other foreign matter.
Extra over Above item for every sub sequent coat of
Painting two coats (excluding priming coat) on
external surface of new rain water, soil, waste and
vent pipes and fittings with ready mixed
70 1 bituminous brushing, black, anti corrosive to give 20.16 Sqm
an even shade including cleaning of all dirt, dustand
other foreign matter.(75 mm dia)
Painting two coats (excluding priming coat) on
external surface of new rain water, soil, waste and
vent pipes and fittings with ready mixed
71 1 bituminous brushing, black, anti corrosive to give 25.05 Sqm
an even shade including cleaning of all dirt, dust and
other foreign matter.(100 mm dia)
Painting two coats (excluding priming coat) on
new wood and wood based surface with enamel
paint, interior to give an even shade including
72 1 cleaning the surface of all dirt, dust and other 26.78 Sqm
foreign matter sand papering and stopping. (a) Ready
mixed paint brushing wood primier pink.
Painting one coats (excluding priming coat) on
previously painted wood and wood based surface
with enamel paint, to give an even shade including
73 1 cleaning the of all dirt, dust and other foreign matter.(b) 26.78 Sqm
Ready mixed paintbrushing priming for enamel
Extra over Above item for every sub sequent coat of
Painting two coats (excluding priming coat) on
new wood and wood based surface with ready
mixed paint, brushing, oil, gloss, semi gloss to give
75 1 and even shade including cleaning of all dust, dirt 104.12 Sqm
and other foreign matters and papering and
Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an
required shape even shade after thoroughly
76 1 brushing the surface to remove all dirt, and 113.4 Sqm
remains of loose powdered materials.etc
Applying two coats of Birla (white cement based)
or Asian (acryliclapy- putty) or equivalent & two
coats of primer of approved brand and manufacture
on new wall surface to give an even shade
77 1 including thoroughly brushing the surface free 40.19 Sqm
from mortar dropping and other foreign matter and
sand papered smooth.
Painting one coats (excluding priming coat) on
previously painted wood and wood based surface with
78 1 enamel paint, to give an even shade including cleaning 55.13 Sq.M.
the of all dirt, dust and other foreign matter.
Writing letter or figures on any surface with
black japan paint (stops, comas, hyphens and the
like not to be measured and paid for per
separately) (i) Block (Letters/Figures) (Per 10 Letter letter
Demolition including stacking of serviceable
materilas and disposal ofunserviceable materials
with all lead and lift. (i) R.C.C. work
Demolition of Brick work and stone masonry
including stacking of serviceable materil as and
disposalof unserviceable materials with all lead
and lift.(ii) In Cement Mortar.
Dismentaling tiled of stone floors laid in mortar
including stacking of serviceable materil as and
disposal of unserviceable materials with all lead and
Dismentaling of sheet roofing including
ridges, Hips, Valleys, Gutters etc. stacking of
83 1 serviceable materil as and disposal of 47.25 Sqm
unserviceable materials with all lead and lift.(i)
G.I.sheet roofing.
Dismentling steel work including distempering
84 2000 and stacking the materials with all lead and lift. 2.42 Kg.
Dismentling doors, windows, ventilators etc.
(wood or steel) shutters including chowkhats
architraves, hold fasts and other attachment
85 1 etc. complete and stacking the material within all lead 185.85 Each
and lift.(i) Not exceeding 3 Sq.M.in area.
Dismentling doors, windows, ventilators etc.
(wood or steel) shutters including chowkhats
architraves,hold fasts and other attachment
86 1 etc. complete and stacking the material with in 248.85 Each
all lead and lift.(ii) Exceeding 3 Sq.M.in area.
Dismentling barbed wire in fencing including
making rolls and also including dismentling
fencing posts including all earth work concrete in base
and making good the disturbed ground stacking
87 1 useful materials as directed and disposing 66.15 Rmt
as directed and disposing of the
unserviceable materials with all lead and lift.
Dismentling C.I. pipes G.S.W. pipes abd A.C.
rain water pipes with fittings and clamps including
stacking the materials with all lead and lift (for any
Dismantling santtary fittings like wash basin.
W.C. pan Indian and Europe an type, flushing tank
etc. including stacking the materials with all lead
Scraping oil paint from steel and other metal surface
90 2 and making the surface even (with Hand 48.83 Smt
Removing and scraping of old deteriorated
plaster of any thickness from wall / R.C.C
91 1 member including stacking of serviceable material 19.38 Smt
and disposal of unserviceable from site of work with
all lead and lift
Providing and fixing M.S. fan clamps of shape
92 1 and size as specified in existing R.C.C. slab 168.53 Each
including cutting chase and making good.
Cutting out cracks of roof terrace to V-section,
93 1 cleaning out, wetting, grouting with cement and 64.58 Rmt
sand slurry 1:3 (1-cement 3-sand )
Cutting out cracks roof terrace to V-Section
cleaning out and filling solidly with a hot
mixture of bitumen and clean dry sand (1:1 by
Providing & Fixing in position Alluminium
doors with frame using approved quality
anodised extruded alluminium section as
approved by Engg.in charge(Jindal alluminium)(a)
Frame sections 101.6x44.45 mm (b)
Shutter bottom vertical & top section
Shutter bottom section at 114.3x44.45 mm at (1.37
95 1 kg/mt) Shutter middle section at 100x44.3 wt.(1.37 2,900.00 Sq. M.
kg/mt) incl.providing & installing 5 mm thick
approved color Acrylic sheet of standard quality
fixed with glazing chips on upper pannel &
Laminated sheet on lower pannel (wtt.0.13
kg/Rmt) etc.comp.as direction of engg.in charge
Providing & Fixing in position Fully Panelled /
Partly Panelled Partly Glazed / Fully Glazed
Alluminium doors with frame using approved quality
anodised extruded alluminium section as approved by
Engg. In charge.(Jindal alluminium )(a) Frame
sections 101.6x44.45 mm b) Shutter vertical
& top section 83.5x44.45 (wt. 1.31 kg/mt.)(
at 1.31 kg/mt) © Shutter bottom section at
96 1 x44.45mm at ( 1.37 kg/mt ) Shutter middle section 4,583.00 Sq.M.
at 100x44.3 wt. (1.37 kg/mt ) incl. providing &
installing 5 mm thick Glass of standaed quality
fixed / 12 mm thick Laminated sheet with
glazing chips (wt. 0.13 kg/ Rmt) in panels etc.
comp. as per Detail Given & direction of engg.in
Providing & Fixing in position Alluminium
window 2/3/4 track sliding / fix type with frame
using approved anodised extruded alluminium
section as approved by Engg. In
97 1 charge.(Jindal alluminium) units equivalent. 4,518.00 Sq. M.
including P/F installing 5 mm thick clear/tinted
Glass of standard quality etc.comp.
Providing & Fixing in position Alluminium
vents with frame using approved anodised
extruded alluminium section as approved by
Engg. In charge.(Jindal alluminium) units
98 1 equivalent Frame section of 63.50 x 38.50 mm. 4,218.00 Sq. M.
(wt.0.68 Kg/Rmt) incl. Providing & Installing
mm thick Glass of standard quality etc. comp.
Providing and fixing of Ridge flashing for
roof panel shall be made out of 0.5 mm thick
pre coated GI sheet. The Pre coatedsheet shall
be of minimum 240 mpa steel grade confirming
to IS 14246:1995 and shall have zinc coating of
minimum 120 gsm as per IS:277:1992, 5-7
microns epoxy primer on both side of the sheet and
polyester top coat 15-18 micron. The PP GI Sheet
99 1 shall have plastic protective guard film of 510.1 Sqm
minimum 25 microns to avoid scratches during
transportation. The ridge shall be fixed to the steel
members by poprivetor self drilling/self
stitching fastners @ maximum 450mm c/c along
length of capping/flashing etc complete .
Supplying and fixing vinyl flooring over the
surface having 1-2 mm thickness as per directed
by engineer incharge etc as completed (N.S.)
Providing and laying 15mm bamboza
wooden flooring as per architect's drawing
with all necessary details as directed by
101 1 the project consultants. Use underlay for 2,690.00 Smt
better result as per Detail specifications and
directed by the project consultants. (N.S.) Approved
Providing and fixing 1.20 Metre high fencing
with 2.0 Metre long M.S. Angle posts 40 mm x
mm x 6 mm and oil painting 3 coats fixed at
Mt, C/c. with five Horizontan lines and two
diagonals of galvanised steel barbed wire
102 1 weighting 9.38 Kg. per 100 Metre, strained and fixed 385.4 Rmt
to posts with G.I, staples including fixing the
posts in ground with 0.5 M x 0.5.M x 0.5 M.
block in C.C 1:5:10 etc complete.
Renovation and Repairing work in Chainlink
fencing any size and also refixing work incl.
103 400 febrication work with all materails to be painted 735 Rmt.
one coat of primer and twocoats of paint as directed
inline and level. (N.S.)
Constructing a sink (chowkedi) with C.C. 1:2:4,
12 cm. thick over B.B. masonry in C.M, (1:6) in
front and dwarf wall 1.0 Mt. high and 23 cm.
104 1 thick cement plaster to masonry / in C.M.1:3) and 2235.66 Rmt
cement concrete flooring in 1:2:4:mix 5cm.dia.drain
pipe etc.complete.
Constructing a cooking platform 60 cm. width and
70 cm high resting on B.B. Masonry walls 23 cm.
thick in C.M. (1:6) with (i) Fixing or
105 1 precast R.C.C. 1:2:4) 8 cm. thick slab with marble 933.98 Rmt
chips set in C.M. (1:6) (6 mm thick terrazo) with
plastering on exposed faces walls in C.M. (1:4) etc
Extra rate for using Ready Mix Concrete of
any grade for below ground level to vertical upto
any floor with delivery & suction Pipe & Pump etc.
106 1 The rate includes fule, pump operator, skilled labor, 760 Cmt
driver etc completed and as per direction of engineer in
P/A Tremix with dewartering machine and
floater machine on constructed CC work for
finishing the surface as per requirement. The
107 1 rate including all machinaries, labor, loading, 54 Sq.M.
unloading, transportaion etc complete as per
direction given by engineer incharge.
Carrying out timber treatment to all wood work
including drilling holes and spraying oil based
chemical solution on surface of timber work for
termite control including labor and material etc.
complete. Using Chlorpyriphos20 EC as per 6313
Part III (1% concentration by mass) is recommended one
108 1 litre chemical emulsion diluted with 19 liters of 54.98 Smt
kerosene. Total diluted concentration will be 20 liters
inclusive of 1 liter chemical emulsion application in
drilled holes and 0.75 / Litre chemical per one Sqmt two
coat on wood surface not protected by paint or varnish.
Applying general insecticide pest control treatment to
floors, cupboards etc including labour materials etc.
complete. Using Imidacloprid 30.5 SCas Per IS
109 1 6313 part -II( (0.075% concentration by mass) is 88.4 Smt
recommended 10.5ml chemical diluted with 5 liters
of water application 0.5 litre chemical /Sqm of surface is
recommended as per I.S.
Carring out plinth treatment to post construction /
existing structure by spraying chemical solution
for termite control treatment including labour and
material consist ment with I.S. specification.
Using Chlordene and Chior purfiles 20 EC. As
Per 6131_paret-II Consentration Weight on percentis
110 1 recommended i.e one litre 20 EC chemical 104.9 Smt
emulsion with 19 liter give 1% concrentration
inclusive of one litre chemical emulsion
appication attherate of 5 Litre chemical / Sqm
of surface is recommended as per I.S
Carrying out wall treatment for termite control
including spraying with chemical solution in oil base
including labour and material Using Chlorpyriphos
ECAs per IS 6313 part - II (1% concentration by mass)
is recommended i.e one litre chemical emulsion diluted
111 1 with 19 liter oil base. Total solution will be 20 liters 37.34 Smt
inclusive of one liter chemical emulsion application at
the rate of 7.5 litre chemical / Sqm of surface is
recommended as per I.S.S
Providing erecting and fixing double
coated Syntex or equivalent PVC.(ISI) water
112 2000 tank of required capacity each with all necessary 3.91 Litre
fittings and connection etc. complete on terrace.
Providing and fixing to wall, ceiling and floor
galvanised Mild steel tubes(Medium grade) of
113 the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor.
1 (F) 50mm 779.6 Rmt
Providing and laying in trenches galvanised
mild steel tubes (Midium grade) of the
114 following nominal bore, and tube fitting
(Earth work in trenches to be measured and paid
for separately)
Making connection of galvanised Mild steel
distribution branch with galvanised mild steel main
115 1 50 mm to 80 mm nominal bore by providing 600.08 Each
and fixing tee including cutting and threading the
pipes complete.
Providing and fixing to wall ceiling and floor
Kg.F/Cm2 working pressure poluthene pipes of
the following out side Dia. Low densidy,
116 complete with special falnge compression type
fittings,wall clips etc.including making good the
wall ceiling and floor.
Providing and fixing to wall ceiling and floor
10.0Kg.F/Cm2 working pressure polythene pipes
of the following out side Dia. Low densidy,
117 complete with special falnge compression type
fittings, wall clips etc. including making good
the wall ceiling and floor.
1 (C) 32mm 116.4 Rmt
Providing and fixing cast iron (Spun) Nahni
trap of the following nominal diameter of self
cleaning design with C.I. screaed down or
118 1 higned grating including cost of cutting and making 600.08 Each
good the walls and floor 100 mm inlet and 50 mm
outlet.(C)100mm dia.
Providing and fixing water closet squatting Pan
(Indian type W.C.Pan) size 580 mm (Earth
119 1 work, bed concrete, foot rest and trap to be 926.1 Each
measured and paid for separately) (A) Vitreous
China. (I)Long pattern = White colour
Provdg. & fixing wall mounted White /
Color Vitreous China European water closet
with integral P trap of "Cera" - Clair Series or
120 1 equivalent incl. seat cover , Chair Bracket etc. 4,250.00 No.
complete as per direction of engg. In
Providing and fixing wsh down water closet
(Europe an type, W.C.Pan) with integral P or S
trap including jointing the trap with soil pipe in
121 1 Cement Mortar1:1 (1- Cement:1-fine sand) (Seal 1290.8 Each
and cover to be measured and paid forseparately)
(A) vitreous China Pattern :(i) in white colour
Provdg. & Fixing Flat Back Large Urinal of White/
colour of "Cera" or " Hindware" incl. C.P. Brass
122 1 waste coupline , waste pipe, 1,850.00 No.
pvcconnection etc. Complete.( size 635 x395x420
Providing & Fixing Angle cock of " Ess Ess" -
Trend series or equivalent standard make as
approved by engg. in charge all complete. (N.S.)
Providing and fixing 100 mm size P or S
trap for water closet squatting pan including
124 1 jointing the trap with the pan and soil pipe in 311.85 Each
cement Mortar1:1 (1 Cement : 1-Fine sand)(A)
Vitreous China.
Providing and fixing wash basin with single hole
for pillar tap with C.I.or M.S. brackets painted white
including sutting holes and making good the same
125 1 but excluding fittings. (A) Vitreous China: (ii) Flat Back 1400.18 Each
wash basin 550 mm x v 400 mmsize.(i) In white colour.
Providing and fixing Kitchen sink with C.I.
or M.S. brackets, painted white including cutting
holes in walls and making good the same but
126 1 excluding fittings. © Vitreous China Sink. (i) 600 mm 2257.69 Each
x 450 mmx 150 mm size
Providing and fixing 600 mm x 450 mm bevelled
edge mirrror of superior glass mounted on 6 mm
127 1 thick A.C. sheet or ply wood sheet and fixing to 825.48 Each
wooden pluge with C.P. brass screws and washers.
Providing and fixing chromium plated brass halftrun
128 flush cock of approved quality including fixing in pipe
line etc. complete.
Provdg. & fixing White / Color Vitreous china
Counter wash basin with signle hole for pillar tap of
"Cera " - Concord series of 550 x425 mm size to be
fiited in stone counter with necessary brackets
painted white incl. cutting holes and making
129 1 good the same .Cost Includes P/F C.P. brass 2,950.00 No.
waste coupline, 32 mm dia fisher union ,15 mm dia.
Pillar cock & Angle cock of " Ess Ess"- Trend series
,32 mm dia. Waste pipe etc. complete as
per dir. of engg. incharge.
Providing and fixing washbasin with single holefor
pillar tap with C.I. or M.S. brackets painted white
including sutting holes and making goodthe same but
130 1 excluding fittings.(A) Vitreous China:(ii) Flat Back 1400.18 No
washbasin 550 mm x v400mm size. (i) Inwhite colour.
Providing & Fixing S.S.304 Grade Sink of
Nirali / Krishna or Equivalent Make for
Kitchen Platform of size : 24":x18" as per
Direction of engg. Incharge
Providing and fixing C.P. brass towel rail
comlete with C.P.brass brackets fixed to wooden
plugs with C.P. brass scews.(B) 600mm x 20mm size.
Providing and fixing 600 mmx120 mm glass shelf
with C.P. brass bracket and guard rail complete
mixed to wooden plug with C.P.brass screws.
Providing and fixing toilet paper holder. (A)
Providing and fixing screw down bib taps of
135 following size. (A) Brass screw down bib tap
polished bright.
1 (i) 15mm dia. 184.98 Each
1 (ii) 20mm dia. 212.68 Each
Providing and fixing screw down bib taps of
136 following size. (B) Brass chromium plated screws
1 (i) 15mm dia. 184.98 Each
1 (ii) 20mm dia. 212.68 Each
Providing and fixing screw down bib taps of
following size. © Gun metal screw down bib tap.
1 (i) 15mm dia. 157.29 Each
1 (ii) 20mm dia. 176.09 Each
Providing and fixing pillar tap, capstan head,
138 screw down high pressure with screws, shanks and
1 (i) 15mm dia. 305.67 Each
1 (ii) 20mm dia. 351.18 Each
Providing and fixing Gun metal check or non-
return fullway wheel valve.
1 (i) 15mm dia. 184.98 Each
1 (ii) 20mm dia. 201.8 Each
1 (III) 25 MM DIA 416.47 Each
1 (E) 40mm dia 656.86 Each
Providing and fixing chromium plated brass
140 half trun flush cock of approved quality including
fixing in pipe line etc. complete.
1 (i) 20mm dia. 252.26 Each
1 (ii) 25mm dia. 261.16 Each
1 (iii) 32mm dia. 273.03 Each
Providing and fixing Urinal or approved
quality including conecting the Urinal with
141 1 waste pipe , tap etc.complete. (A) White earthen 1026.01 Each
ware flat back or corner type size 430mm x
Providing and fixing Urinal of approved
quality including connection with trap and
142 1 with integral longitudinal flush pipe. (A) 1535.63 Each
Squating plate pattern white earthen ware 550mm
Providing and fixing chromium plated, bottle
143 1 trap with necessary couplings of approved quality 292.87 Each
for wash basin.
Providing and fixing ball cock ofapproved quality
144 1 as directed. (A) Copper Metal (i) 25mm dia. 131.57 Each
Providing and fixing ball cock of approved
quality as directed. (B)Abonite (i) 25mm dia.
Filling with good Quality thor as and where
directed by the Architect / Engineer-in-charge,
146 1 in sunk in layers of 15 cm. thickness, including 3,850.00 Cmt
watering, ramming well etc. complete, as directed by
the Architect / Engineer-in-charge .
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH- 40) for cold water
including fittings make PRINCE/ SUPREME/
ASTRAL/ FINOLEX or equivalent as approved
by Engineer In Charge. Pipe shall be fixed on the wall
147 150 with the help of clamp at every two metre C/C or 71.93 Rmt
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with solvent, including cost
of all materials.adhesive
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH- 40) for cold water
including fittings make PRINCE/ SUPREME/
ASTRAL/ FINOLEX orequivalent as approved
by Engineer In Charge. Pipe shall be fixed on the
148 150 wall with the help of clamp at every two metre C/C 90.93 Rmt
or shall be concelled as directed including
necessary fittings etc. including testing of pipe and
joints and fixing the same with adhesive solvent,
including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH- 40) for cold water
including fittings make PRINCE/ SUPREME/
ASTRAL/ FINOLEX or equivalent as approved
by Engineer In Charge. Pipe shall be fixed on the wall
149 150 with the help of clamp at every two metre C/C or 117.97 Rmt
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH- 40) for cold water
including fittings make PRINCE/ SUPREME/
ASTRAL/ FINOLEX or equivalent as approved
by Engineer In Charge. Pipe shall be fixed on the wall
150 100 with the help of clamp at every two metre C/C or 146.65 Rmt
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH- 40) for cold water
including fittings make PRINCE/ SUPREME/
ASTRAL/ FINOLEX or equivalent as approved
by Engineer In Charge. Pipe shall be fixed on the wall
a 50 with the help of clamp at every two metre C/C or 193.73 Rmt
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials.
Providing in line level plumb, fabricating
and fixing three row horizontal barbed wire
fencing and punched tape concertina coil of
turns per meter of 610 mm dia fixed with clips on
top of the angle iron posts. The punched tape
concertina coil having sharp barbs at every 25 mm
spacing shall be 0.5 mm thick and 19 mm width and
weighting 13 kg/100 mt. (Average) as per
151 1 manufacture's specification. The rate shall 390 Rmt
also include providing and fixing
mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c
spacing embaded in RCC column, angle posts shall be
painted with one coats of red oxide and two coats of
enamel paint of approved quality at top compound
Fixing sun film for protection sunlight in black or any
152 1 colour as as directd by engineer In Charge.(Market rate) 850 Smt
Providing & Fixing 3 mm thick F.R.P.sheet
of Approved Quality & Color / Pattern as per
Consultant's design also includes required
fabrication structure in the grid of 2'-0x2'-0 size
using hollow pipe of16 gauge & size 2"x1" & 1"x1"
153 1 ,G.I. & Bitumen Washers, Silicon paste application 1,930.00 SqM
for fixing the sheet . Rate also includesnecessary
bending, cutting, labor charges , Zinc Primer coat &
Two coats of oil painting of color as approved
by consultants & making good the wall.
Providing 2 mm thick F.R.P. Gutter with necessary
M.S. Supporting Brackets.
Hiring charges for J.C.B.machine inclduing cost of
155 80 fuel, operator, dirver etc..( 12 hours sift 600 Hrs.
To provide tractor with hydraulic trolley, driver,
Nos. of Labor with all tools like bucket drum, showels,
trikam, pavadas, etc,, to carryout
different works during monsoon for 12 Hrs. Shift.
156 10 Work shall be carried out as per the instrucitons 3,000.00 No.
of Engineer In-Charge.No extra charged shall be paid
for night shift.
Roller Blind Providing and fixing Roller Blind
curtain fixed on window level on wooden
batten and curtain lift with cotton thin rope,
157 1 make of aerolax or equivalent design and colour 3,285.00 Smt
as per instruction by engineer – in – Charge with
necessary hardware fitting, material and labour etc
Providing & Fixing Door closer - complete of Approved
158 1 make to wooden / Aluminium Doors as per direction of 560 No.
engg. In charge.
Providing and fixiing M.S. Fan clamps type 1 of 16 mm
dia M.S. bar bent to shape with hooked ends of R.C.C.
159 1 slabs during laying incl. painting the exposed protion of 124.74 No.
loops, all as per standard design complete.
Providing cement vata (10cm. x 10 cm. size)
160 1 quarter round in cement mortar 1:1 including neat 23.45 Rmt
cement finishing, watering etc. complete.
Making Water connection from exi.Muni. Water line
Providing and applying fibere reinforced
cementitious micro concrete work in cellings
and beams incl.mixture of
CEMSCREED HM (F) fair mate company
material, FBR bonding agent material with
162 1 water in suItable proportion anti corrosive treatment 530 Smt
on exposed beam,celling steel bars with safeCore R
incl.all kind of labour etc.comp.including three
coat of white wash.
Providing and Fixing 1 H.P. Electrical monoblock
or submarcible water pumps withmotor and required
163 1 cable and switch board of approved brand and 6,800.00 Set
make etc.comp.as directed.
.Providing TMT Bar FE 415 reinforcement for R.C.C.
163 a 1 work including bending, binding and placing in position 66.59 Kg.
complete up to floor two level
ProvidingTMTBarFE500/500Dreinforcement for
R.C.C.workincluding bending,binding and placing in
b 8390.9 position complete upto floor two level placing in 75.46 Kg.
position complete upto floor two level placing in
position complete upto floor two level
Providing and fixing 30mm thick solid both side prelam
PVC door shutter (sintex door equivalent) with
necessary alluminium fitting with EL-7 section frame
Conveyance charge of Earth,Lime, Murrum, building
rubbish earch manure or sludge and excavated rock and
fly ash,aggregate of any kind etc.comp.upto 5 km
Providing and laying polished granite stone slab 18 mm
thick in risers of steps, dedo and pllars laid on 10 mm
thick cement mortar 1:3 (1 cement:3 coarse sand)
166 200 and jointed with gray cement slurry including rubbing & 2,690.00 Smt
polishing etc.complete.
Wall panelling with 12 mm MDF fixed to existing
alluminium framing and making grove as per design
and finished with royal plastic paint as per
instruction of engineer incharge. (N.S.)
Providing and laying 15mm bamboza
wooden flooring as per architect's drawing
with all necessary details as directed by
168 1 the project consultants. Use underlay for 2,690.00 Smt
better result as per Detail specifications and
directed by the project consultants. (N.S.)
Applying two coats of Birla
(whitecementbased) or Asian (acryliclapy- putty)
or equivalent & two coats of primer of approved
169 1 brand and manufacture on new wall surface to 40.19 Sq.M.
give an even shade including thoroughly brushing
the surface free from mortar dropping
Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an required
170 1 shape evenshade after thoroughly brushing the surface 113.4 Sq.M.
to remove all dirt, and remains of loose powdered
materials.etc complete
Providing and fixing flush door shutters, solid
core construction with frame of first class
hardwood with cross board and face veneer or
plywood face panels, with both side 1 mm
laminate finishing including anodized aluminum
butt hinges with necessary screws. Decorative
type and pine wood core anodized minimum 3 no
150 mm long aluminum butt hinges in flush door
shutters with 2 no of brass holdfast 325 mm long
no brass tower bolt 250 mm long and two no of
mm long brass door handle . Decorative both side
laminated Flush door 35 mm thick. with frame of
10 cm x 7 cmt Indian teak wood frame including
all necessary fitting fixtures hardware screw
and adhesive etc fixing up to all lead and lift
height up to 45 mtr from GL etc complete as per
direction of engineer in charge
P/M/F chainlink jali 8'x4' size as per details sketch &
instructionof engineer in charge same as lal darwaja
garden pattern consisting of 3'dia. M.S black pipe 'A'
class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of
9"x9"x9" size chain link jali of size 2"x2"x10 gauge
fixed in 35x35x5 mm MS angle frame 8'x4' size with
172 1 MS flat of size 25x3 mm welded jali etc.comp.The jali 1,230.00 Rmt
is to be welded to MS pipe with MS flat as instruction
given.The M.S pipe and the M.S angle frame are to be
painted one coat of primer and two coats of paint as
directed in line and level. (N.S)
Providing & Fixing masonary wall with porbandar
lachiya stone with well dressed grooveas per directed
by engg.in charge for foundation, plinth or super
structure level (above plinth level upto floor two level)
in cement mortar 1:5 (1-cement : 5-fine sand)
173 incl.pointing the joint with white cement and yellow
oxide powder in proportion to match stone colour
the joints should be thread grooved as per exi. lake
stone pitching apperance
(A) stone masonary wall/stone dressed single faced (size
1 (B) stone coping (size 15"x8"x4") 510 Rmt
1 (C) stone coping (size 15"x8"x9") 790 Rmt
1 (D) stone column (size 15"x15") 10,710.00 Cmt
1 (E) stone column top (size 20"x20"x9") 685 No.
Supplying and fixing of 300 mm-L x 15 mm-B
x 380 mm-H Kerb block for Footpath in M-20
grade using 20 mm nominal size black trap
aggregate of Sevaliya/Timbaor equivalent
quality for pre-cast blocks,
reasonablyexposed finish/ formwork
, mould with well equippedwith
vibratory system for kerb stones of approved
design including curing, etc. complete, including
thecost of formwork etc. complete. The rate shall
174 1 also include necessary cutting of asphalt, 393 Rmt
fixing the Kerbstones in line and level on
cm thick sand bedding withnecessary
equipments and materials. The rate shall also
include the flush pointing in CM (1:3) for all joints of
thekerbstones. Filling of zari alone the sides of the
kerbstone fixed with Bituminous concrete
Bituminousconcrete / C.C. mixed in proper
position to flush withthe road surface as
directed by Engineer in change to form a
portable mixture.a) Laying on 5 cm thick Sand Bedding
Providing and Laying of Rubber Moulded Paver Block
Grey/Coloured 60 mm thick, M 35 Grade of any size
shape (Usually Uni-Paver Blocks) using black trap good
quality aggragate of 20 mm nominal size for
footpath,parking areas, service lanes and other areas as
mentioned in the drawing / instruction of engineer in
charge. Cost includes formworks using rubber mould,
Rate providing and laying paver blocks as per
required grading and specification. The paver
block shall be mechanically compacted. The work
of paving blocks shall be executed in line and level
175 1 by skill mason of flooring work only. It should be laid 429 Smt
in such a way that the no cutting of the paver block to be
necessary. if cutting of paver block necessary then it
should be cut by machine only and carting. The
finished surface of the paver block shall have
resonably good, plain finished. Paver blocks shall be
compacted and shall be relaid if necessary. Gravel or
such type of materials shall not be allowed for
production. Laying on 5 cms thick sand
Provoding and fixing flush door shutters, solid core
construction with frame of first class hard wood with
cross board and face veneer or ply wood face panels,
including anodised alluminium butt hinges with
necessary screws. (B) Non- decorative type and block
176 1 board core anodised alluminium butt hinges in flush 1779.97 Smt
door shutters (2) 35 mm thick. Labour work for fixing
any kind of paving with cement pointing in CM 1:2,
including watering, ramming etc comp. as dir.For
I) Laying on Sand bedding as per requirement to fix the
C.C.Block / Nibhada Stone in Line & Level
Box type metal letters forming composite box made
from 1mm thick stainless steel plate of grade
having brush finish of following font size to be fixed at
178 Main Gate in english and or Gujrati and including fixing
charges approved before fixing by clent / consultant.
A 1 400mm high 1,000.00 Nos.
B 1 300 mm high 750 Nos.
C 1 230 mm high 565 Nos.
Providing and fixing false ceiling at all height including
providing and fixing of frame work made of special
sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS : 277 and consisting of angle cleats
of size 25 mm wide x 1.6 mm thick with flanges of
mm and 37mm, at 1200 mm centre to centre, one flange
fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of
required length with nuts & bolts of required size and
179 1 other end of angle hanger fixed with intermediate G.I. 850 Smt
channels 45x15x0.9 mm running at the spacing of
1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each having lips of 10.5 mm,
at 450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x
mm long G.I. wire at every junction, including fixing
perimeter channels 0.5 mm thick 27 mm high having
flanges of 20 mm and 30 mm long, the perimeter
of ceiling fixed to wall/partition with the help of rawl
Providing and fixing of Roller blind curtain/blackout.
The fabric shall be woven from formulated platisol
extruded over a polyaster yarn.The fabric shouldl be
weaved to provide subtle view of the side of the blind
181 1 and should offer elimination of glare and sunlight 2,610.00 Smt
radiance upto a minimum of 80%.The fabric shall be
flame retardant.
Providing and fixing PVC/Gpsysum plain colour false
ceiling with grid type with aluminium frame from
gypsteel, fastners ,props, Finishing as per
architectural drawing allowing openings for
182 1 A.C. Diffusers, Light/Electrical Points etc 933 Smt
–complete, Prior to fixing on frame.(Brand :
Anutone or equivalent ) (N.S.) or as directd by
engineer In Charge.
Provdg. & laying S.W. Gully trap with brick masonry
chamber & water tight G.T.Stone including fixing of
covervSquare mouth trap 100 mm x100 mm size P-Trap
Providing cement vata (10cmx10cmsize) quarter
184 1 roundin cement mortar 1:1 including neat cement 23.45 Rmt.
finishing, waterin getc. complete.
Providing and laying (to level or slopes) and
jointing with stiff mixture of Cement Mortar in
185 1 proportion 1:1 Salt glazed stoneware pipes including 211.05 Rmt.
testing of pipes and joints complete.(A) 100mm dia.
Providing and laying (to level or slopes) and
jointing with stiff mixture of Cement Mortar in
186 1 proportion 1:1 Salt glazed stoneware pipes including 288.23 Rmt.
testing of pipes and joints complete.(B) 150mm dia.
Constructing brick masonry chamber for
underground C.I. Inspection chamber and bends with
bricks having crushing strength not less than 35Kg/Cm2
in C.M. 1:5 C.I. cover with frame (Light duty)
455mm x 610mm intenal dimensions total weight of
cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top
187 1 slabe with 1:2:4 mix (1-cement :2- coarse sand :4- 2903.89 Each
graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat
of neat cement on walls and bed concrete etc.
complete.(i) Inside dimensions 455mmx 610mm and
450mm deep for single pipe line.
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with bricks having
crushing strength not less than 35Kg/Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-
188 1 cement :2- coarse sand :4-graded stone aggregate 20mm 3624.51 Each
size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed concrete
etc. complete.(i)Inside dimensions 500mm x 700 mm
and 450mm deep for pipe line with one or two inlets.
Providing, supplying and fixing precast C.C. blocks (M-
20) edge kerb having size of 75 x 300 x 300 mm depth
and as per design conveying it to the site, jointing into
189 1 C:M 1:3 and racking out the joints incl. 219 Rmt.
necessary excavation of asphalt, soiletc..completed.
Constructing a cooking Sandwich platform 60 cm. width
and 70 cm high resting on B.B.Masonry walls
cm.thick in C.M.(1:6) with (ii) Fixing black Granitee
190 1 30mm thick laid on precast R.C.C. (1:2:4) slab with 754.95 Rmt.
plastering on exposed faces of wall in C.M.(1:4) etc
Providing and fixing hard drawn steel wire fabric 75mm
x 25mm mesh or weight not less than 7.75 kg. per Sq.M.
to window frames etc. including60 x 20mm beading of
Providing & fixing 15 cm wide chicken mesh jali with
nails & then application of 15 mm plaster on R.C.C.&
masonary joints as per dir.of engg.in charge
Providing and laying cement concrete flooring 1:2:4 (1-
cement : 2-coarse sand :4-graded stone aggregate 20mm
193 1 nominal size) laid in one layer and finished with a 348.08 Smt.
floating coat of neat cement. (A) 50mm thick.
Providing and constructing, Underground (U/G) water
tank of specified capacity, on specified location, for all
depths, in controlled CC of M-200 grade with bottom
slab, top slab and RCC walls, including cost of form
work and reinforcement,with inside and outside plaster
in CM 1 :3 and water proofing treatment as per IWP
194 1000 specification,including injection, grouting, etc. 6.5 Litre
complete. The rate includes for providing and fixing
two nos. 0.6m. x 0.6 m. size medium duty CI
manhole cover/s at top, including wash out pipe line and
inlet and outlet connections etc.complete.
Providing and fixing PVC Printed pain colour false
ceiling with grid type with alluminium frame
consisting of 600mm x 600mm 3mm thick plain
PVC sheet used as panel insert in a frame work made
using anodized alluminium T section of size 1 x 1 (235
x 25mm, 19 gauge or 1 mm thick) in square pattern of
grid sizes of 2 x 2 (600 x 600mm) The alluminium
frame work is supported from the cceiling with the
195 1 help of G.I. hook and G.I. wire/6mm M.S. rods of 300.12 Smt
required sizes to maintain proper level etc. The
aluminium frame work is supported on side wall
with the use of alluminium L section of size 1 x1 (25 x
25mm) angles etc. complete as per direction of Engineer
in charge. Manufactures specification and
Providing and supplying of labour for necessary
manual excavation, cleaning,Shifting of Material Or
196 1 any other, or for any other work as directed by Engineer 551 No
In charge. The Rate includes Handcart with Mazdoor
A 10 Mukadam/supervisior/karigar 425 No
B 2 Fitter/Plumber/Mason 697 No
C 2 WELDER/ Gas cutter at Day /night 689 No
Supplting of welding machine / gas cutter including
cost of welding rods/gas, Transportation, including
carting from site to work place.
E 5 Mazdoor at Day Female 450 No's
E 5 Mazdoor at Day Male 493 No's
Supplying electric breaker machine for RCC slab or
asphalt demolishing work on site by using operator, fuel,
power supply etc.complete as directed. (no payment
197 2 should be allowed for non working condition of 1071.42 Shift
machinery and for pipe line excavation and M.H.
work. Allowed only for break down work)
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Sanitation Foundation (NSF) seal for potable water of
198 following dia. Nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
A 1 15 MM DIA 165.21 Rmt
B 1 20 MM DIA 202.97 Rmt
C 1 25 MM DIA 247.25 Rmt
D 1 32 MM DIA 330.36 Rmt
E 1 40 MM DIA 437.66 Rmt
199 1 50 MM DIA 647.3 Rmt
Supplying and fixing C.I. cover 300mm x 300mm
200 1 without frame for Gulley trap (Standard pattern) te 491.8 Each
weight of cover to be not less 4.53 Kg.)
Providing and fixing to wall ceiling and floor
10.0Kg.F/Cm2 working pressure polythene pipes of
the following out side Dia. Low densidy,
201 complete with special falnge compression type
fittings, wall clips etc. including making good the
wall ceiling and floor.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
T No 108 MUNI BUILDINGS TP 32 Ognaj BOQ.pdf
T No 108 MUNI BUILDINGS TP32 ognaj Tender.pdf
Download all tender documents and submit your bid