Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹27.0 L+₹47,843.61 (1.80%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹34.1 L+₹7.6 L (28.7%)Rejected-Finance VILL PO KAMPA NEAR ASHRAM DIST NORTH 24 PGN KOLKATA WB | 24 PARAGANAS NORTH | WEST BENGAL | 743193 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹34.9 L+₹8.4 L (31.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
27 Feb 2024, 6:00 pmClosed
GE Barrackpore
Office of the Garrison Engineer Barrackpore, Kolkata - 700120
COMPREHENSIVE MAINTENANCE AND REPAIRS OF DG SETS, DG SET PANELS BOARDS, RO PLANTS WITH CONNECTED MISC ELECTRICAL WORKS AT KANCHRAPARA UNDER GE BARRACKPORE
2024_MES_638514_1
8878/E8
Open Tender
Civil Works
Item Rate
180 days
Barrackpore
Refer to tender documents
3 documents required · 3 mandatory
₹500
GE Barrackpore
₹85,000
Yes
25 Jun 2024
20 Jan 2024
29 Feb 2024
20 Jan 2024
27 Feb 2024
3 Feb 2024
Amount
PART-I Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of ENGINE MODEL 4R-1040T, 35 KVA OF MAKE-KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (NEW COLONY SUB STN) : -
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPLACEMENT
AIR FILTER
MOBILE FILTER
DIESEL FILTER
FAN BELT
REPLACEMENT OF ELECTRICAL WIRING OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER SET FOR DG SET
FUEL PUMP INJECTOR & NOZZLE SERVICE WITH REPLACEMENT OF UNSERVICEABLE PARTS
RADIATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PARTS
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of Model No EW-20 , 15 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set : - (RAIL COLONY PH)
MOBIL FILTER
DIESEL FILTER
AIR FILTER
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
DOOR LOCK
FAN BELT
ELECTRICAL WIRING REPLACEMENT OF DG SET COMPLETE
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
RADIATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZLE SERVICING COMPLETE
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of Model No 4R-1040T , 35 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (MED REGT PH) : -
DIESEL FILTER
AIR FILTER
MOBILE FILTER
FAN BELT
HOSE PIPE
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE REPLACEMENT
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE
Dismantling/taking down and seggregating all Unserviceabale parts carefully with proper T&P for DG set of Model No 4R-1040T, 63 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (EME WKSHOP PH) : -
DIESEL FILTER
AIR FILTER
HOSE PIPE
MOBIL FILTER
FAN BELT
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE
Dismantling/taking down and seggregating all unserviceabale parts carefully with proper T&P for DG set of Model No 4R 1040T , 63 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/replacement/maintenance works is required to be carried out on above mentioned DG Set ( DHARAMPORE PH): -
DIESEL FILTER
AIR FILTER
MOBIL FILTER
FAN BELT
HOSE PIPE
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE REPLACEMENT
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE
Dismantling/taking down and seggregating all Unserviceabale parts carefully with proper T&P for DG set of Model No RB33 SR1 , 30 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (15 WEU) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
HOSE PIPE
FAN BELT
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of Model No RB33 SR1 , 30 KVA OF MAKE- KIRLOSKAR for repair/replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (15 WEU) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
HOSE PIPE
FAN BELT
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPALCEMENT OF DG SET COMPLETE
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceabale parts carefully with proper T&P for DG set of Model No RB33 SR1 , 25 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (DETT SIG) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
HOSE PIPE
FAN BELT
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING FO RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of 63 KVA OF MAKE- ASHOK LEYLAND for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/ maintenance works is required to be carried out on above mentioned DG Set (CEM) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
FAN BELT
HOSE PIPE
FRONT GLASS WITH GUIDER
DOOR LOCK
REPAIR TO SENSOR & PANEL BOARD COMPLETE SET WITH REPLACEMENT OF UNSERVICEABLE PART
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of Model No 4R-1040T , 125 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (MAP PH) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
FAN BELT
HOSE PIPE
FRONT GLASS WITH GUIDER
DOOR LOCK
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
REPAIR TO SENSOR & PANEL BOARD COMPLETE SET WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR AND NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of 5 KVA OF MAKE- EICHER for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (CMI ROOM): -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
FAN BELT
HOSE PIPE
FRONT GLASS WITH GUIDER
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
SELF DYNAMO SERVICE COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR AND NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of Model No 4R-1040T , 63 KVA OF MAKE- KIRLOSKAR for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set (CHARAPOLE PH) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
FAN BELT
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ELECTRICAL WIRING REPLACEMENT OF DG SET
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for DG set of 125 KVA OF MAKE- GREAVES for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set ( 15 WEU AC PLANT) : -
MOBIL FILTER
DIESEL FILTER
AIR FILTER
HOSE PIPE
FAN BELT
DOOR LOCK
PANEL BOARD COMPLETE SET REPAIR AND REPLACEMENT OF UNSERVICEABLE PART
ENGINE FULL SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
ALTERNATOR SERVICE WITH REPLACEMENT OF UNSERVICEABLE PART
BATTERY CHARGER
COMPLETE SERVICING OF RADIATOR WITH REPLACEMENT OF UNSERVICEABLE PARTS
FUEL PUMP INJECTOR & NOZZAL SERVICING COMPLETE WITH REPLACEMENT OF UNSERVICEABLE PART Note for item no 1.00 to 13.00 (A) Monthly inspection and preventive maintenance contractor shall provide qualified trained service engineer from authorised dealer to check and inspect routine maintenance as follows: (a) DG set B check (b) DG set maintenance /health checkup. (c) Checking of Lube oil, top up if required. (d) Check oil filter and cleaning. (e) Check air filter cleaned periodically with compressed air (f) Check batteries and Top up with distilled water (g) Check functioning of alternator (h) Check cooland level and top up (j) Cheack for leak if any and shall be rectified . (k) Diagnosis of faults in engine and alternator and its rectification. (l) Rectification of minor fault shall be done within time 24 hours
Repair, testing and commissioning to PT fuel pump for DG set of any capacity including replacement of all service kit complete all as specified and directed.
M&L for repair/overhauling of self starting system of DG set of capacity upto 123 KVA including replacement of corbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity with necessary connections incluing testing and commissioing complete all as specified and as directed.
Replacement of hinges of door of DG set upto 125KVA capacity with required accessories all as specified and directed.
Shifting of DG set of any capacity from one location to another location as per site requirement all as specified and directed. (Note:- All T&P, hydra crane charge shall be included in qouted rate.)
Dismantling/taking down and seggregating all unserviceable parts carefully with proper T&P for AMF Panel (Auto On Main Failure) DG set of 125 KVA OF MAKE- GREAVES for repair / replacement with new parts after carrying out all repair works including testing all as directed by Engr-in-Charge. The following repair/repalcement/maintenance works is required to be carried out on above mentioned DG Set ( 15 WEU AC PLANT) : -
Repalcement of 200 Amps MCCB, 4 pole, 36 KA complete
Repalcement of relay suitable for AMF panel of rating 125 KVA DG set
Repalcement of Contactor suitable for 125 KVA DG set, 415 Volts, AC, 50 HZ type complete
Replacement of On & Off push button (Red/Green) complete as per sample
M&L for cleaning of Fuel tank of DG set of any capacity manually as well as mechanically and also using cleaning compound making tank neat and clean all as specified and directed.
S&F in repairs of thermostatic valve set of DG set of any capacity with all connected accessories as per sample complete all as specified and directed.
S&F in repairs of water pump assembly and oil pump assembly of DG set of capacity upto 125 KVA with all connected accessories including pump repair Kit as per sample complete all as specified and directed.
M&L for Painting of DG set any capacity as per existing colour by applying two coat of synthetic enamel paint heat resistant by spray painting after preparation of old paint surface cleaning and scrapping writing all DG set specification complete all as specified and directed.
Renewal of battery cable leads of copper conductor of size 70 Sqmm single core PVC insulated multistranded and with lugs for the 12V upto180 AH battery of length 1.5 mtr from the batteries to the DG set as that of existing size and length complete all as specified and directed .
M&L for replacement or topping up of superior quality coolant suitable for DG set Engine cooling complete all as specified and directed.
Drain out the old used engine oil from the sump and cleaning the sump including supply and filling the same with new engine oil (20W -40 or 15W - 40) upto the required level complete all as specified and directed.
S&F of LED All-In-One solar street light fitting 30 watts rating including galvanised steel pole in built in lithium ion battery, solar panel, charge controller with dusk down sensor complete including taking down completely old unserviceable solar light fiiting all as specified and directed. (Note - Excavation and necessary PCC work is included in quoted rate).
Renewal of Heavy duty battery 12 Volt 180 AH fabricated of special propylene container ready to use and factory charged and maintenance free with all connected accessories complete of mode MHD1800, FEX0-MHD1800, 180AH (20 Hour), with acid level indicator including depositing old one to MES store yard complete all as specified and directed. (Make-EXIDE /AMARON/AMCO/NICCO as approved)
Removing and replacing the old unserviceable AVR (Automatic Voltage Regulator) with new ones of the exising make of generator of capacity 63 KVA to 125 KVA, complete all as specified and directed.
Removing and replacing the old unserviceable AVR (Automatic Voltage Regulator) with new ones of the exising make of generator of capacity 15 KVA to 35 KVA, complete all as specified and directed.
S&F in repairs of 'ON LOAD' change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps with side handle operated complete all as specified and as directed.
S&F in repairs of 'ON LOAD' change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps with side handle operated complete all as specified and as directed.
S&F of MCCB 4 pole 415 V, 160Amps with breaking capacity 36KA complete all as specified and directed.
S&F of MCCB 4 pole 415 V, 250Amps with breaking capacity 36KA complete all as specified and directed.
M&L for earthing with glavanised steel earth plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers with galvanised iron strips of size 32 x 6 as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable earthing complete all as specified and directed. (Note: Galvanised iron strip of size 32x6mm upto 7.5m long including testing is deemed to be included with quoted rate).
Renewal of Heavy duty battery 12 Volt 90/100 AH fabricated of special propylene container ready to use and factory charged and maintenance free with all connected accessories complete of mode MHD1000, FEX0-MHD99 AH (20 Hour), with acid level indicator including depositing old one to MES store yard complete all as specified and directed. (Make-EXIDE EXPRESS/AMARON/AMCO/NICCO as approved)
Servicing and overhauling of RO Plant of 500 LPH capacity including neccessary minor work all as specified and directed.
S&F of Micron filter Cartridge suitable for 500 LPH RO plant complete all as specified and directed.
Supply only Antiscalant chemical suitable RO system complete all as specified and directed.
Supply only Sodium bi carbonate complete all as specified and directed.
Replacement of RO control panel complete all as specified and directed.
Replacement of Rotameters complete all as specified and directed.
Dosing pump for RO plant complete all as specified and directed.
S&F of RO membrane type 250 LPH discharge capacity suitable for 500 LPH RO plant complete including taking out old unserviceable membrane of 250 LPH capacity complete all as specified and directed.
M&L for Replacement of sand and carbon FRP Vessel both with filtration media like pebbles ,carbon ,course sand etc for 500 L.P.H RO Plant including taking out old unserviceable Vessel as per sample with fitting of all connected accessories required at site and complete testing, commissioning and installation of the plant all as specified and directed by Engr-in-Charge.
Replacement of RO plant complete pipe line of 500 LPH with all fitting as per sample all as specified and directed.
Servicing and maintenance of solar water heater of capacity upto 300 ltrs FPC type cleaning tank and collector with acid and water including replacement of connector, socket, PVC pipe all as specified and directed. (Note:- Job will be carried out on rooftop and existing system installed at a hieght of 25 m above the normal ground level, neccessary requirement of T & P for execution of work is deemed to be included in unit rate quoted)
Taking down old unserviceable broken solar water heater flat plate collector of 100 Litre capacity from existing system installed at roof top (Approx 25 Mtr from normal groung level) by uncsrewing complete nuts, bolts and screws and removal of other filments/accessories like inlet and outlet water supply pipe lines, valves etc. complete all as specified and directed. (Note:- Job will be carried out on rooftop and existing system installed at a hieght of 25 m above the normal ground level, neccessary requirement of T & P for execution of work is deemed to be included in unit rate quoted)
Supply, fixing, commissioning and testing of stainless steel ftal plate collector for solar water heater of capacity 100 ltrs, (total system capacity 200/300ltrs) 250 KPA, roof mounted complete with all connected accessories and connection of water supply pipe line for input and output supply and suitable for existing system complete all as specified and directed , PCC, grouting, foundation work shall be included in quoted rate. (Note:- Job will be carried out on rooftop and existing system installed at a hieght of 25 m above the normal ground level, neccessary requirement of T & P for execution of work is deemed to be included in unit rate quoted) (Make : As per sample as approved by GE)
Taking down/ dismantaling carefully existing solar water heater tank of capacity 300 ltr by unscrewing all fitments and water supply pipe lines and removal of tank from the system complete including any minor work required at site complete all as specified and directed. (Note:- Job will be carried out on rooftop and existing system installed at a height of 25 m above the normal ground level, neccessary requirement of T & P for execution of work is deemed to be included in unit rate quoted)
Supply, fixing, commissioning and testing of stainless steel solar water heater tank of capacity 300 ltrs ,(total system capacity 300ltrs), roof mounted complete with all connected accessories and connection of water supply pipe line for input and output supply and suitable for existing system including Tank stand of required size, PCC, grouting, foundation work shall be included in quoted rate complete all as specified and directed (Note:Job will be carried out on rooftop and existing system installed at a hieght of 25 m above the normal ground level,neccessary requirement of T & P for execution of work is deemed to be included in unit rate quoted) (Make : As per sample as approved by GE)
Servicing, overhauling and Rewinding to fountain pump and motor set of required capacity 2/3 HP complete with replacement of connected pipe and nozzle installed at site complete all as specified and directed.
Servicing greasing of Rotational search light 300W and its motor complete with replacement of capacitor, rotational motor, bearing/bush and other connected accessories installed at site complete all as specified and directed.
Taking down existing rusted/worn out MS cross arm, angle, clamps, nuts, bolts and washers and supply and fixing new MS Cross arms, bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed by Engr in charge.
S&F for 25mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for gunmetal gate valves with iron wheel head, screwed both ends for iron pipes after taking down old unserviceable gate valve of size 25 mm complete all as specified and as directed.
S&F in replacement CPVC tubing medium grade with all fitting and fixed to walls & ceilling or laid in floors, bore of pipe 20/25 mm complete all as specified and directed.
M&L for testing of water samples for complete Physical, Chemical and Biological and Bacteriogolica, Examination of Treated water collected from Pump house Bore well and taken into any state Govt or any NABL approved laboratory for water tesing all as specified and as directed by Engr-in-charge.
M&L for Collection of Treated Sewage water sample (quarterly) from Sewage Treatment Plants of 300/350 KLD capacity from Kanchrapara Military Station and carry out following test from Govt Laboratory or any NABL approved laboratory complete all as specified and as directed by Engr-in-Charge. (a) B.O.D. (Biochemical Oxygen Demand) (b) C.O.D. (Chemical Oxygen Demand) (c) T.S.S. (d) Residual free chlorine, mg/ltr (e) PH value, Oil and Grease (f) Total Coli from Organisms per 100 M (MPN) (g) T O C (Total Organic Carbon)
S&F LED Flame proof light with single T8 tube 18W IP65 protection with die cast aluminium housing with heat resistant toughened glass, with LED tube light fixtures driver, holder, connector etc complete with all accessories prewired and including connecting up with flexible copper cable complete all as specified and as directed
S&F Highbay light luminaire 200W with pressure die-cast housing, integrated PC optics and 150 lm/W efficacy 4KC in -built and 10 KV external surge protection IP66 ingress protection with additional safety chain. (Note:- Fixing charge ,T&P charge, crane, for fixing light is included in qouted rate)
M&L of 40 mm bore GI pipe (Light grade) pole including necessary cutting hole in brick/stone wall and making good the same with PCC 1:2:4 type C1 as required including taking down old unserviceable pole complete all as specified and directed.
M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 16 sqmm, 4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking down old unserviceable cable complete all as specified and directed.
M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 35 sqmm, 3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking down old unserviceable cable complete all as specified and directed.
Excavation in trenches in soft/ loose soil not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out for taking out / laying of GI /CI pipe line and making bottom surfaces of excavation leveld and to a gradient complete all as specified and directed.
Returning, filling in trenches with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing surplus soil /spoil to a distance not exceeding 50 metre away and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x .75mm laid dry flat complete all as specified and directed .
M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured)
Boaring holes horizontally under road without damaging the surface of road(minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of dia not exceeding 100 mm dia for passing of UG cable all as specified and as directed.
M&L for SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of existing unserviceable one compete all as specified and directed.
DEYS ENTERPRISE
azad enterprise
MAZUMDER AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .