RELAY OF SOUTHERN LOOP ORAS OF RUNWAY AND CERTAIN WORK SERVICES AT ORR AT AF STN JAMNAGAR

Amount

M& L for 50mm-100mm (consolidated thickness) premix dense bituminous macadam (DBM) grade 2 of IRC laid in multiple layers with minimum 4.5% of binder content by weight of total mix with paving bitumen VG-30 using hot mix plant with minimum marshal stability 900 kgs laid /rolled and compacted to required gradient and camber using necessary mechanical sensor paver and tandem vibratory roller of capacity exceeding 8 tonne but not exc 12 tonne complete all as specified and directed.

Notes for item No.1.00 :- (i) No price adjustment shall be applicable if excess quantity of binder content bitumen (VG-30) is used /approved in execution of work. (ii) Each layer shall be rolled and consolidated separetly. (iii) DBM shall be asper MORTH specification as detailed in particular specification. (iv) Trial bay as specified shall be prepared but no payment shall be made for the same and unit rate quoted shall be deemed to be included in this provision. (v) No price adjustment in quantity of cement/hydrated lime(filler) and anti-stripping agent (liquid type) if required as per approved design mix. (vi) Minus price adjustment shall be made for less quantity of binder paving bitumen as per approved design mix at Rs 55/Kg of less bitumen used.

M&L for providing, laying and consolidating 40mm thick premixed dense asphaltic concrete DAC-II of IRC (Marshal stability 14KN) using minimum 5.6% for DAC binder content by weight of total mix with performance grade PMB-70-10 (SBS) with service condition (E) based as per IS-15462-2019, laid /rolled in single layer and compacted to required gradient and camber using necessary mechanical sensor paver and tendam vibratory roller of capacity exceeding 8 tonne but not exc 12 tonne complete all as specified and directed.

Notes for item No.2 :- (i) No price adjustment shall be applicable if excess quantity of binder content (Polymer modified bitumen) is used / approved in execution of work under this item.

(ii) Minus price adjustment shall be made for less quantity of binder paving bitumen as per approved design mix at Rs 63/Kg of less bitumne used.

(iii) No adjustment in quantity of Cement/Hydrated lime (Filler) and Anti striping agent (liquid type) (if required) approved by GE, as per approved design mix shall be made.

(iv) Trial bay as specified in Sch 'A' notes shall be prepared but no payment shall be made for the same. Unit rate quoted shall be inclusive of this provision.

(v) DAC shall be asper MORTH specification as detailed in particular specification.

(vi) Work shall be done by using hot mix plant and sensor paver.

M&L for preparation of new concrete/Bitumen surface and plastered surfaces etc over 10 cm width or girth and applying two coats of water base road marking paint (white / snow, white / blac k / golden yellow / Orange / Signal red) over one coat of primer as in lines, dashes, arrow, letters etc complete all as specified and as directed.

M& L Preparing the concrete/black top surafaces by brushing with wire brushes for removing caked mud etc. sweeping with mechanical blower or brooms to remove all loose dirt etc and applying evenly a tack coat of paving bitumen at 5.0 Kg per 10 Sqm with VG-10 using mechanical sprayer over the prepared surface complete all as specified and directed. Note : Tack coat of each layer shall be measured and paid separately.

M&L for forming embankments(approved moorum/red bajri brought from outside MD Land) including raising (for lowering) earth, spreading in layers not exc. 25cm thick, watering, rolling and finishing to required size, shape, etc n.exc 1.5m high from base (compaction shall be done until the density achieved is 98% of MPD) complete all as specified and directed.

M&L for forming expansion joints by saw cutting 20mm wide and thickness of slab 150 mm and filled with bituminious expansion joint filler board and sealing compound Grade "B" complete all as specified and as directed.

Scarifying or picking gravelled or dismantling of existing surface exc. 50mm and n. exc 100mm deep , macadom or bituminous macadam surfaces in area n.exc 400 sqm complete complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) and removal of debries out side MoD land etc complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonary Type C1 1:3:6 ( 20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M&L for rendering 12mm thick in CM1:6, on brick work or concrete surfaces, rendering surface finished even and smooth without using extra cement, including mixing water proofing compound (3% by weight) complete all as specified and directed. Note :-(WPC will be measured and paid separately)

Supply only Intergal water proofing compound.

M&L for two coats of cement base paint over one coat of alkali resistant primer including preparation of new plastered surfaces of wall complete all as specified and directed.

M&L for two coats of distemper oil emulsion over chalk whitining including preparation of new plastered surfaces of wall complete all as specified and directed.

Taking down Shutters of any description exc 1sqm and n.exc 2sqm each complete all as specified and directed.

S&F 40mm thick flush shutter, solid core construction, with block board core and plywood face panels, one face is coverd with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F Plain, solid straight chowkats and frames 2nd class hardwood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer including preparation of new wooden surfaces of any description , not otherwise described, over 10cm width or girth complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, slidingdoor bolt with hasp,staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

S&F 125mm size Butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 150mm size floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F Anodised aluminium powder coated frame for windows with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated window shutters, side hung type without sash including 4mm thick float glass panes, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no. ) hinges type B-21 100mm long ( 2 no ) suitable handle ( 1 no ) complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B1 ( using 20mm graded aggregates ) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B1 ( using 20mm graded aggregates ) in beams, cantilevers, bressuinmers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs, floor slabs not exceeding 200mm thick ( Horizontal or sloping ) with rough finished surfaces complete all as specified and directed.

M&L for Formwork to soffits and sides of beam / lintels etc with rough finished surface complete all as specified and directed.

M&L for CRS bars10mm dia and over, cut to length bent to shape required incl cranking, bending spirally for hoping for colums, hooping ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified and directed.

ditto as above item no 29 but 6mm to 8mm dia

ditto as above item no 29 but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders

M&L for Rendering 10mm thick in CM 1:3 on ceiling/chajja fin facia surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparing new plasterd surfaces complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles of size 350 x 250 x 7mm / 450 x 350 x 7mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces including bedding layer of 10mm thick cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded aggregate as in Ramp/Plinth protection and platform and floor including finishing cement concrete surface even and smooth without using extra cement including necessary formwork if required complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified and directed.

M&L for Vetirfied ceramic tiles double charge 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc. 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the surface complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Granite ( of any type ) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

Supply and fix 500 liters capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and directed.

S & F 20 mm size gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed.

S&F Ball brass valves, 20mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20 mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed to walls, ceilings or in floors etc complete all as specified and directed.

S&F 15 mm bore dia, bib tap, cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.

S&F sinks made of high grade stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, single bowl with drain board overall size 915mm x 460 mm ( single bowl =410mm x 330mm x 160 mm )

S & F for 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair vitreous china white wash hand basin 450 mm x 300 mm including brackets including supply and grouting 6 to 8 mm dia GI bracket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S&F in repair vitreous china Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe , grating and union for discharge pipe complete all as specified and directed.

S & F in repairs for 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection all as specified and as directed.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S & F for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 150 mm internal dia RCC drain pipes class NP2 laid in trenches and jointed complete all as specified and directed.

S&F PVC (SWR) 125/110mm gully traps, square or round mouthed type ''P" complete all as specified and directed.

M&L for cement concrete bed 1:4:8 type D-2 to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc or for shaft wall, cesspits, man holes pier holes etc, n.exc 10 sqm on plan and n.exc 1.50 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning filling in excavated soil in layers n.exc 25cm thick including spreading, levelling, watering and well ramming etc complete all as specified and as directed.

Material & Labour removing excavated material (soil) to a distance upto 50m and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed.

Material & Labour for point wiring with 1.5 Sqmm multi stranded copper conductor PVC insulated, unsheathed, FR-LS( Flame Retardant Low Smoke ) Cable 1100 volts grade ISI marked drawn and including PVC conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardent low smoke cable as a earth wire connected to common earth dolly, etc complete all as specified and directed.

(a) One light/fan point controlled by one switch

(b) One 5 Amp Socket outlet on independent board.

(c) One 5 Amp Socket outlet on same board.

All as per item No. 62 above but for 15 Amp independent socket out let with 2.5 Sqmm copper cable complete all as specified and directed.

S & F Modular switch 1 way 6A , 1 module, ISI marked complete all as specified and directed.

S & F Modular switch 1 way 16A , 1 module, ISI marked complete all as specified and directed.

Supply & fix socket , 5 Amps, Modular type , ISI marked complete all as specified and directed.

Supply and fix socket , 6/16 Amps, Modular type,ISI marked complete all as specified and directed.

S&F LED type building security light, 25 watt, white light with driver, having luminaries Efficiency not less than 100 lm/Watt, fixed in Pressure Die Cast Aluminum housing, & glass cover, Ingress protection of IP 65, including all necessary fitting & fixture,& connecting complete all as specified and directed.

S&F Exhust fan metallic type, 300 mm sweep, 240 V, AC, single phase complete with aluminum louvers and shutters including provision of flexible three core copper conductor cable of 23/ 0.0076 up to ceiling rose and grouting 04 Nos full threaded bolts and nuts etc all as specified and directed.

Supply and fixing LED Tube light fitting with tube rod complete with complete accessories, 20 Watts, complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 10 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. ( Note: Excavation and earthwork shall measured and paid separately.)

S&F modular white cover plate with frame including providing modular metal flush box 3-module for fixing of modular switches & sockets all as speified and directed.

S&F modular white cover plate with frame including providing modular metal flush box 6-module for fixing of modular switches & sockets all as speified and directed.

Supply and fixing of SPN DB 6 way with 200 Amps rated bus bar, double door, duly power coated with following accessories :- (a) MCB SPN 32 Amps 10 KA 'C' series - 01 No (b) MCB SP 6-32 Amp 10 KA 'C' Series - 04 Nos

Sch of credit Rs 2190.00

Brahma Infra