Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹34.2 L+₹1.9 L (5.83%)Rejected-Finance | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹34.7 L+₹2.4 L (7.32%)Rejected-Finance 3491 14 HARIPURA DHAPAI ROAD AMRITSAR | AMRITSAR | PUNJAB | 143001 | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹35.6 L+₹3.3 L (10.1%)Rejected-Finance 26 NEW AVAS VIKAS COLONY DELHI ROAD SAHARANPUR UP | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹40.5 L+₹8.2 L (25.4%)Rejected-Finance INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
CERTAIN REPAIR TO JCOS/OR MD ACCN IN SURYA LINE, MAP PH-III AND MES COLONY UNDER GE CLEMENT TOWN, DEHRADUN
2023_MES_606450_1
GE /CLT/ of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class D Cat a(i)
6 documents required · 6 mandatory
₹500
Yes
GE Clement Town
₹90,000
Yes
17 Oct 2023
28 Jun 2023
1 Aug 2023
28 Jun 2023
25 Jul 2023
11 Jul 2023
Amount
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 5mm thick plaster in ceiling of CM (1:3) on brick walls finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick plaster in CM (1:6) other than fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty on walls complete all as specified and directed.
M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.
M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. (cleaning of reinforcement bars by removing of loose concrete)
M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed.
M&L for RCC (1:2:4) type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed.
M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7-8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7-8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar (1:4) complete all as specified and directed.
M&L pre-polished Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe (where required) over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM (1:4) complete all as specified and directed.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.
M&L for cleaning of old roof slab surface inc removing existing surface with water and filling of cracks with sealing compound or polymer modified mortar ,applying neat cement slurry @ 3 kgs of cement per sqm and applying 40 mm thick (average thickness) PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding finish surface even and smooth without using extra cement inc mixed with liquor water proofing compound as per manufacture instruction complete all as specified and directed. NOTES- water proofing compound will be measured and paid separately)
Supply only liquid water proofing compound complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces fair and even complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.
Refixing 15 mm old steel tubing and connection in new or old poisition wall ,ceiling ,floor etc. complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.
Refixing 20 mm old steel tubing and connection in new or old poisition wall ceiling floor etc complete all as specified and directed.
S&F in repair double layer (ISI marked) rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.
Disconnecting existing tanks, of 500 ltr capacity,setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connection PVC P or S trap, connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.
S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and directed.
S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed.
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.
S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and directed.
S&F in repair 15mm dia brass chromium plated pillar tap with fly nut long swan neck screwed for 15mm bore dia of pipe complete all as specified and directed.
S&F in repair 15mm Stop valve angle cock fancy type(concealed type), chromium plated , screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed.
S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.
S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.
S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall/floor and trenches making good existing surface complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall/floor and trenches making good existing surface complete all as specified and directed.
S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed.
S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed.
S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm making good existing surface complete all as specified and directed.
S&F galvanised iron sheet 1.2mm thick cut in circular shapes of size 450mm dia and bent to the shape of cover of PVC overhead tank with edges turned. Spikes made of 1.2mm thick GI sheet cut in triangular shape with sharp edge 50mmx25mm size bent and fixed to circular sheet with rivets at 100mm c/c spacing bothways. The sheet with spikes shall be fitted to overhead tank with 4 Nos self tightening screws complete all as specified and directed.
S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed.
M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified and directed.
S&F in repair of 20mm dia stainless steel drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed.
Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike, plate etc complete all as specified and directed.
M&L Pressed steel framed 125x60 mm for doors with one or more rebates inc necessary fixing lungs hings lock strike plate,etc complete all as specified and directed
M&L for PCC (1:3:6) type C1 (using 20mm graded aggregate stone aggregate) as in hold fast blocks including filling of pressed steel framing complete all as specified and directed.
Taking down shutter only exc 1 sqm but not exc 2 sqm complete all as specified and as directed.
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed.
S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.14mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.
M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.
S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 125mm c/c both ways(Horizontal and Vertical), 4 mm thick sheet glass, 0.36mm stainless steel wire cloth i.e. 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing
S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F 100mm size MS butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.
S&F 75 mm stainless steel hinges complete all as specified and directed.
S&F 150mm size stainless steel handles complete all as specified and directed.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed.
S&F in repair 4mm thick plain glass of aluminium window by taking down window shutter by any means and replacing rubber packing, jointing clip etc complete all as specified and directed.
S&F in repair 18 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.
S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.
M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
SWASTIKA BUILDERS
AMARJEET SINGH AND CO.
Nanda Brothers
M/s RK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .