REPAIR, REPLACEMENT, CLEANING OF SEWAGE LINES, MANHOLE, GULLY TRAPS AND MISC WORK AND REPAIR TO ROAD, PATH, HARD STANDING, DRAIN ETC IN OP AREA AT AF STN HALWARA

Demolition of Brickwork or PCC block built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete including even and smooth surfaces without using extra cement, complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint, including dark bluecolour of pillar /RCC/brick facia, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of cement base paint on walls, complete all as specified and directed.

Cleaning and maintaining the sewage system for the entire OP Area of Air Force Station Halwara and allied establishments which consists of IWCs, EWCs, WHB, sinks, bottle traps, Nahani traps, floor traps, soil/waste/vent pipes of various dia connected to sanitary fittings/traps and/or running on external walls of buildings of any height, in sunken floors, burried in trenches of any depth including junctions, Manholes of any description (any size/depth) and under ground sewage/sullage lines of any sizes/dia upto the final drop outlet into septic tank/soak well/Manhole of central sewage system, in running/flowing condition without disturbance or damages to existing system including removing all types of blockages in above mentioned sanitary fittings/traps/sewage lines/man holes in any position as and when occures and ensuring free flow of the sewage/sullage from the point of origin to the final disposal end and disposal of the sludge/waste materials removed from above mentioned sanitary fittings/traps/sewage lines outside defence land without causing any nuisence to Air Force community/civil public and in confirmity with the regulations of local authorities, with out any extra cost to Govt during the currency of the contract and area covered under the contract are OP area, complete all as specified and directed.

(e) Penalty for non completion of work in given time :- The works assigned for the day shall be completed by the same day, preferably within 9.30hrs to 17.30hrs after receipt of the work orders /instructions by the supervisor. In case, due to any unforeseen technical reasons, if the work is unable to complete by the same day, the matter shall be informed to the AGE by the contractor in writing and permission of AGE to carry over the work to next day shall be taken in writing. In such situations, the work shall be resumed by the very next day and the work shall be completed in the shortest possible time. In the event of failure to complete the work ordered on the contractor by the same day due to non detailment of sufficient workmen or any other reason attributable to the contractor, a penalty sum of Rs.1000.00 per each complaint per day of delay.The decision of GE (AF) Halwara regarding penalty shall be final and binding. Despite this, if the complaint is still not rectified within the given time frame by Engr-in-Charge, the Tender liable to be cancelled.

M&L for cleaning of grease trap of any type, capacity and depth by mechanical suction only using honey sucker/vacuum suction machine of suitable capacity, including opening of cover, manually breaking and loosening accumulated grease, oil, sludge, floating scum and other deposits wherever required, complete suction and removal of all deposits, flushing the grease trap with clean water, cleaning inlet and outlet connections up to 1.00 metre, refixing cover in position, loading, transportation and disposal of the collected waste at an authorised disposal facility in accordance with applicable statutory and environmental regulations including all labour, supervision, tools and plants, suction machine, fuel, consumables, personal protective equipment (PPE) and all other incidental charges, complete all as specified and as directed. Note:- 1.The grease traps shall be cleaned periodically or as and when required by the Engineer-in-Charge/User. 2. Each complete cleaning operation of an individual grease trap shall constitute one unit of measurement and shall be measured and paid for separately. 3. A separate log register shall be maintained for each grease trap / location indicating the date of cleaning, location and shall be jointly certified by the User's representative and the Engineer-in-Charge or his authorised representative as proof of satisfactory completion.

4.The quoted rate shall be deemed to include all labour, T&P, deployment of honey sucker machine, fuel, transportation, loading, unloading, disposal charges, water required for flushing, PPE, and all other incidental expenses necessary for complete execution of the work. 5. Any repair/replacement of grease trap components, covers, frames, baffles, pipework, masonry or concrete work shall be measured and paid separately under the relevant items.