STREET LIGHTING OF LIMITED HEIGHT SUBWAY (LHS) AT LEVEL CROSSING NO. JT-122 AT KM 723/12-13 SITUATED AT OFBL PREMISES.

Amount

STREET LIGHTING OF LIMITED HEIGHT SUBWAY (LHS) AT LEVEL CROSSING NO. JT-122 AT KM 723/12-13 SITUATED AT OFBL PREMISES’

Excavating trenches in hard/dense soil n exc 1.5 m wide and n exc 1.5 m in depth for cable trench work/erection of pole & getting earth out.

Excavating trenches in hard/dense soil n exc 1.5 m wide and exc 1.5 m in depth for earth pit construction & getting earth out.

Returning & filling of excavated soil in the cable trench including spreading,levelling and well ramming in layers not exc 25cm .

M & L for reinforced cement concrete of Type B0 (1:2:4) with 12.5 mm graded aggregate in foundations, filling and mass concrete.

M & L for Mild Steel Bars of Fe-410-W (Gde. E-250) Quality A of 10 MM Dia and Over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns and binding with & including mild steel wire not less than 0.9mm dia or securing with clips.

M & L for Mild Steel Bars of Fe-410-W (Gde. E-250) Quality A of 8 MM Dia and Over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns and binding with & including mild steel wire not less than 0.9mm dia or securing with clips.

M & L for earth continuity conductor or main earthing lead fixed to poles or any other situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire.

Framed work with Galvanised Iron as in doors or gates of angle (25x25x6)/GI Pipe of dia 40/50 MM or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging; also fastening and fixing complete.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No.4 to the earthing test point all as specified and indicated including testing on completion.

M & L for 40 mm Dia Tubes, Medium Grade, Galvanised, with all fitting, laid in trenches.

M & L for 50 mm Dia Tubes, Medium Grade, Galvanised, with all fitting, laid in trenches.

M & L for circuit wiring in steel conduit with single core FR PVC insulated copper conductor of size 2x1.5 sq mm ( Line & Neutral) + 1x1.5 sq.mm (Earth Wire) in surface/recessed as required.

Material & Labour for 3.5 Core PVC insulated armoured, heavy duty electric cable with aluminium conductor, 1100 Volts Grade, Cross-Sectional Area 25 Sq. MM

Material & Labour for 3.5 Core PVC insulated armoured, heavy duty electric cable with aluminium conductor, 1100 Volts Grade, Cross-Sectional Area 35 Sq. MM

Supplying & fixing 415V 10KA 'B' Curve Miniature Circuit Breaker (MCB) of TPN/FOUR POLES and 16 to 32 A Current Carrying Capacity in the DB complete with testing and commissioning.

Supplying & making end termination with brass compression gland and aluminium lugs for 3.5 core 25 Sq mm (28 mm)size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying & making end termination with brass compression gland and aluminium lugs for 3.5 core 35 Sq mm (32mm)size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying & fixing cable route marker with 10 cm x 10 cm x 5 mm thick GI Plate with inscription there on bolted/welded to 35 mm x 35 mm x 6 mm angle iron , 60 cm long & fixing the same in ground as required.

Supply & fixing LED flood light, 50 Watt, 230 V AC Outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact & corrosion resistant complete with driver & lamp.This includes suitable GI clamp for fixing in the wall/angle/pipe.

Supply & fixing LED street light, 60 Watt, 230 V AC Outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact & corrosion resistant complete with driver & lamp.This includes suitable size of GI Clamp for fixing in bracket.

Supply & fixing of octagonal or tubular GI metallic street light pole of height 6 meter suitable for installation through grouting with complete accessoreis and including 60 Watt +/-5 LED light fittings, Decorative bracket of length 1.5 to 2 m for fixing of light fixtures and assembled FRP/metallic marshalling/ junction box having din rail & suitable ratings of 1/2 Nos. of MCBs & 8 Nos. of PVC Connectors for termination of incoming & outgoing power cables and wiring from junction box to light fittings with 3 core, 1.5 sq. mm copper conductor cable. The pole, LED light & wire etc. shall be confirming to relevant IS. LED light & other electrical switchgears to be used shall be of ISI marked. Earth excavation & RCC woks to be measured separately.

Supply & fixing of octagonal or tubular GI metallic street light pole of height 7 meter suitable for installation through grouting with complete accessoreis and including 60 Watt +/-5 LED light fittings, Decorative bracket of length 1.5 to 2 m for fixing of light fixtures and assembled FRP/metallic marshalling/ junction box having din rail & suitable ratings of 1/2 Nos. of MCBs & 8 Nos. of PVC Connectors for termination of incoming & outgoing power cables and wiring from junction box to light fittings with 3 core, 1.5 sq. mm copper conductor cable. The pole, LED light & wire etc. shall be confirming to relevant IS. LED light & other electrical switchgears to be used shall be of ISI marked. Earth excavation & RCC woks to be measured separately.

Supply & fixing of octagonal or tubular GI metallic street light pole of height 5 meter suitable for installation through grouting with complete accessoreis and including 60 Watt +/-5 LED light fittings, Decorative bracket of length 1.5 to 2 m for fixing of light fixtures and assembled FRP/metallic marshalling/ junction box having din rail & suitable ratings of 1/2 Nos. of MCBs & 8 Nos. of PVC Connectors for termination of incoming & outgoing power cables and wiring from junction box to light fittings with 3 core, 1.5 sq. mm copper conductor cable. The pole, LED light & wire etc. shall be confirming to relevant IS. LED light & other electrical switchgears to be used shall be of ISI marked. Earth excavation & RCC woks to be measured separately.

Supply & fixing of octagonal or tubular GI metallic street light pole of height 4 meter suitable for installation through grouting with complete accessoreis and including 60 Watt +/-5 LED light fittings, Decorative bracket of length 1.5 to 2 m for fixing of light fixtures and assembled FRP/metallic marshalling/ junction box having din rail & suitable ratings of 1/2 Nos. of MCBs & 8 Nos. of PVC Connectors for termination of incoming & outgoing power cables and wiring from junction box to light fittings with 3 core, 1.5 sq. mm copper conductor cable. The pole, LED light & wire etc. shall be confirming to relevant IS. LED light & other electrical switchgears to be used shall be of ISI marked. Earth excavation & RCC woks to be measured separately.

Supply & laying of armoured jelly filled 5 pair copper conductor telephone cable in the cable trench. The cable shall be confirming to TEC Specification.

Supply & installation of 415 V LT Outdoor Type Powder Coated Distribution Box suitable for Floor Mounting having DIN rail, 8-12 Nos. of PVC connector of current carrying capacity 63 Amp.

Supply & fixing of 10 Pair outdoor type Galvanised Metallic Telephone Junction Box suitable for floor mounting with all fixing accessories such as din rail, connectors, lock & keys and nut & bolts.The scope of work also includes termination of 5 pair telephone cable inside the telephone junction box with suitbale lugs and connectors.Measurement of earth excavation & cement concrete for foundation to install the distribution board will be done separately.

Arihant Electricals & Engineers

Arihant Infrastructure