PROVN TOILET AT WATER NO 4 AT PATTAN,SPL REPAIR TO BUILDING NOS T-5 T-73 T-78 OF ENGR REGIMENT AT PATTAN UNDER GE 969 EWS.

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-In-Charge.

Demolition of stone slabs & tiles of any description or thickness in floor, aprons, plinth protection etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-In-Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as directed by Engr-in-charge.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer-In-Charge.

M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete complete all as specified and directed by Engineer-In-Charge.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm all as specified complete all as specified and directed by Engineer-In-Charge.

Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point all as directed by Engr-in-charge.

M&L for walling of random rubble masonry built in CM 1:6 brought up to courses complete all as specified and directed by Engineer-In-Charge.

Extra over hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge n.exc 40mm complete all as specified and directed by Engineer-In-Charge.

Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, plinth Course, bond stones including use of form work complete all as specified and directed by Engineer-In-Charge.

M&L For PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed by Engineer-In-Charge.

Taking down shutter only exc 1.00 sqm but n.exc 2.00 Sqm each and refix in the same opening complete all as specified and directed by Engineer-In-Charge.

Demolition of brick work, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.

Dismantling timber scantling under 40 Sqcm in section, as a fillets, rafter, purlins etc in any position unframed work complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water complete all as specified and directed by Engineer-In-Charge.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified and directed by Engineer-In-Charge.

M&L Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-In-Charge.

Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces complete all as specified and directed by Engineer-In-Charge.

M&L Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring complete all as specified and directed by Engineer-In-Charge.

M&L for non-skid coloured ceramic tile 7 to 8mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-In-Charge.

M&L for vitrified ceramic tiles Dark shade 10mm thick (square/rectangular ) polished ,area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors ,in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-In-Charge.

M&L for glazed ceramic tiles in vertical surface 450 x 350 x 7mm thick colour and design (as approved) in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15mm thick cement plaster using CM (1:4) plete all as specified and directed by Engineer-In-Charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protecation finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-In-Charge.

M&L for hardcore of gauge n exc 63 mm ,deposited ,spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface complete all as specified and directed by Engineer-In-Charge.

M&L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded agg as in flooring finished even and smooth w/o usin extra cement complete all as specified and directed by Engineer-In-Charge..

M&L for 4 mm thick veenered decorative plywood grade 1 with one side decorative face fixed with nails in walls to timber work including dismantling of wall board and cover fillets complete all as specified and directed by Engineer-In-Charge.

S&F in repair for 4 mm thick veenered decorative plywood grade 1 with one side decorative face fixed with nails in ceiling to timber work including dismantling of ceiling board with cover fillets complete all as specified and directed by Engineer-In-Charge.

M&L 2nd class hard wood plain fillets square rectangularor triangular in section ,clean sawn section area exc 3 sq.cm not exc 6 Sqcm fixed with secured with nail or brads complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class hard wood in scantling clean swan timber framed and fixed to the position including dismantling of decayed timber complete all as specified and directed by Engineer-In-Charge.

S & F rubber moulded Chequered cement concrete Endura tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in CM (1:6) finshed with coloured cement to match the shade of the slab complete all as specified and directed by Engineer-In-Charge..

M&L for Granite ( any type) tiles 20 mm thick machine cut in skirting/dado, platforms & Cell etc bedded and jointd with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including grinding and polishing complete in any design and pattern complete all as specified and directed by Engineer-In-Charge

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out complete all as specified and directed by Engineer-In-Charge.

S & F for 2nd Class hardwood in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class Hard wood 35mm thick, plain, framed, panelled shutters (any number of panels) with panels of veneered particale board or plywood lock rail and panel of 12mm veneered particle board with commer or bison board complete all as specified and directed by Engineer-In-Charge.

35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-In-Charge.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paintcomplete all as specified and directed by Engineer-In-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 complete all as specified and directed by Engineer-In-Charge.

S&F Aluminium handles, cast type, anodised 125mm long pcomplete all as specified and directed by Engineer-In-Charge.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 150 mm long complete all as specified and directed by Engineer-In-Charge.

200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed by Engineer-In-Charge.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed lenght of bolt 250mm complete all as specified and directed by Engineer-In-Charge.

S&F 100mm butt hinges ,extruded aluminium alloy with galvanisad mild steel hinge pin ,anodised and fixed ,type B-21 complete all as specified and directed by Engineer-In-Charge..

S&F in repair for 2nd class soft wood fascia/boarding planned one side with butt joint 20 mm thick fixed complete all as specified and directed by Engineer-In-Charge.

All as item No 45 above but fixing only clean swan boarding in repair complete all as specified and directed by Engineer-In-Charge.

Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (unframed work) plete all as specified and directed by Engineer-In-Charge.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed by Engineer-In-Charge.

S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw complete all as specified and directed by Engineer-In-Charge.

M & L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and complete all as specified and directed by Engineer-In-Charge.

Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc ,complete all as specified and directed by Engineer-In-Charge.

S&F in repair Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. fixed with coatch screw as directed .

All as item No 53 above in repair but except sheeting fixed with coatch screw as directed complete all as specified and directed by Engineer-In-Charge.

Dismantling PVC water tank exc 500 Ltrs and n.exc 1000 Ltrs capacity complete all as specified and directed by Engineer-In-Charge.

S&F Rotational moulded polyethyline water storage tank ( cylinrical vertical with close stop) hosted and fixed in position all as specified 500 Ltrs capacity complete all as specified and directed by Engineer-In-Charge.

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs 20mm dia complete all as specified and directed by Engineer-In-Charge.

S & F in repair vitreous china wash basin with padestal, white, flat back, size 550x400mm, plug , porcelain stopper and including brackets with waste fittings and connection pipe etc complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Pillar taps, 15mm dia cast copper alloy fency type, with capstan heads, chromium plated. Screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly nuts screwed for iron pipe & fixed etc complete all as specified and directed by Engineer-In-Charge.

S&F in repairs brass CP mixure taps, 15mm bore fency swan neck type, with capstan heads, chromium plated. Screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly nuts screwed for iron pipe & fixed etc complete all as specified and directed by Engineer-In-Charge.

Preparing on new plastered surfaces and applying two coats of cement base paint on wall over a coat of white wash complete all as specified and directed by Engineer-In-Charge.

Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-In-Charge.

Taking down steel tubing 15mm and connection including cleaning for refixing or removal to store complete all as specified and directed by Engineer-In-Charge.

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore complete all as specified and directed by Engineer-In-Charge.

Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore

Taking down steel tubing 20mm and connection including cleaning for refixing or removal to store complete all as specified and directed by Engineer-In-Charge.

S&F 15mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-In-Charge.

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore complete all as specified and directed by Engineer-In-Charge.

M&L for Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 20 mm bore pipe complete all as specified and directed by Engineer-In-Charge.

S&F for 15 mm bore long nose bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule and fixed complete all as specified and directed by Engineer-In-Charge.

S & F stop valves/angle valve concealled fancy type chromium plated screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore and fixed complete all as specified and directed by Engineer-In-Charge.

S & F in repair 20mm stop valves cast copper alloy chromium plated screwed down high pressure , with cruth or butterfly handle screwed both end for iron pipe

S & F grating doom 100 mm dia of PTMT complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) branch piece equal or unequal, plain including jointing with solvent cement 75 mm bore complete all as specified and directed by Engineer-In-Charge..

All as per item no . 74 but 110mm bore complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) vent cowl, plain including jointing with solvent cement 75mm borecomplete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) floor bend, plain including jointing with solvent cement 75 mm bore complete all as specified and directed by Engineer-In-Charge.

All as per item no . 77 but 110mm bore complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) reducer pipe piece, plain including jointing with solvent cement 110 mm bore complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore complete all as specified and directed by Engineer-In-Charge.

S&F in repair PVC (SWR ) pipes 75mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-In-Charge.

S&F PVC flushing cistern, 10 Litres capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs complete all as specified and directed by Engineer-In-Charge.

S&F in repair vitreous china wash down water closet pan European type, white including seat cover providing plugs ,bedding in cement mortar 1:2 ,securing and waste fittings and connection pipe etc, pointing around complete all as specified and directed by Engineer-In-Charge. Make : Cera/ Parryware

S&F chromium plated connection pipe fency type 450mm long at size 15mm bore with standard PTMT nut fixed to GI tubbing complete all as specified and directed by Engineer-In-Charge.

S&F in repair angle/stop cock (CP) with wall flange complete all as specified and directed by Engineer-In-Charge. [Make : Jaquar cat No FLR 5053N or equivalent].

S&F brass chromium plated tublar Towel Rail 20mm dia, 60cm long including side brackets in repairs complete all as specified and directed by Engineer-In-Charge.

S&F in repair Health faucet (CP) with 8 mm dia 1 mtr long flexible tube with wall hook complete all as specified and directed by Engineer-In-Charge. [Make : Jaquar cat No ALD 573 or Equivalent]

Construction of RCC Hume pipe septic tank, exc in ordinary soil, in PCC 1:4:8 below foundation, vent shaft and sludge chambers etc complete for 10 users complete all as specified and directed by Engineer-In-Charge.

E/M WORKS:-Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete including all fixtures (fitting such as switches, ceiling rose, lamp holders, pendents, regulator, switch socket, light fittings etc without disturbing exisiting serviceable points and fittings, keeping in safe custody for reuse at site, making good disturbed surface walls, floors etc all as directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes,including modular PVC box,modular white cover plate and inner plate with frame of suitable size for mounting modular switches/sockets,fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified and directed for:- (a) One light point controlled by one single pole one way 5 Amps switch.

(b)All as per srl item No-169 above but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

(c)All as per srl item No-169 above but One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

(d) All as per item No-169 above but one switch socket outlet multi purpose, 5pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5sqmm , PVC copper conductor, insulated, unsheathed, stranded.

M&L for point wiring in PVC casing and caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor Complete all as specified and directed by Engineer-In-Charge.

S&F for Socket flush type multipurpose , 5A - 3/5 pin plug top controlled by one switch ,complete all as specified.

S & F fixing Switch piano, flush type single pole, one way 5/6 Amp. Complete all as specified and directed by Engineer-In-Charge.

S & F switch piano flush type 15 amps single pole one way Complete all as specified and directed by Engineer-In-Charge

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 15 Amps, flush type complete all as specified and as directed.

S&F Ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC, complete all as specified and as directed.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket/batten fittings alongwith LED bulb of 9 watt , complete all as specified.Make-Havells/ Philips/Cromption/Bajaj.

S&F stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified. (Taking down of fans included in item No 1 hereinbefore).

S & F MCB SP of capacities 6 to 32 Amps, 240 Volts, Gold plus MCB B Series. Complete all as specified and directed by Engineer-In-Charge

S & F MCB, DP 40 Amps 415 Volts Gold plus MCB C Curve Complete all as specified and directed by Engineer-In-Charge

S&F LED Lamp 10 W Complete all as specified and directed by Engineer-In-Charge

S & F MCB SPN 10-40A Amps 240 Volts MCB B Curve Complete all as specified and directed by Engineer-In-Charge.

S&F MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified. (Make:- Schneider as per cat part- NBKRESNDD04 or equivalent in Havell's or Standard).

MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified. (Make:- Schneider as per cat part- NBKRESNDD08 or equivalent in Havell's or Standard).

Taking down fan, sealing cable end, dismantling blades and removing fan and blades & removing to store for cleaning etc,all as directed

Hanging only fan and connecting up including provision of cable from ceiling rose or connector to fan.

S & F enviroment Friendly ,energy saving,suface mounted ,decorative oval bulk head edge-lit luminaire comprising of high brightness LEDs 10W LED, IP-65 Complete all as specified and directed by Engineer-In-Charge. Make : Havells or equivalent in Bajaj/PHILIPS/CG

S&F endura linear leo surface and mounted LED tube light fitting 20 W, four feet, extruded aluminium housintg provided for efficient heat dissipation with polycarbonate diffuser & integerated electronic driver complete all as specified and as directed by Engr in Charge. Make Havells/Bajaj/Philips/CG

S&F LED Lamp 7 Watts 230 Volts 50 Hz complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing 1 X 18 Watt surface and wall mounted LED batten, with polycarbonate housing & integrated electronic dirver complete all as specified and directed by Engineer-In-Charge.. Make:- Havells cat part no. LHEXBQP71N1W018 or other equivalent in CG/Philips

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core Complete all as specified and directed by Engineer-In-Charge

Earthing complete, all as shown on electrical plate No 3 of MES schedule part-I , as specified including the following :-(i) Galvanised steel earth plate of size 60cmsx60cmsx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

M/S GHULAM NABI KHUROO AND CO

M/s DUTTA BUILDERS