T-42/EDCP/2022-23

Amount

Carriage of following line material for 11KV line from Store Centre to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site

PCC Pole 8.5Mtr. Long

11 KV Cross Arm Channel V type

11 KV Pin insulator

11 KV Pin with nut

11 KV Disc insulator

11 KV Disc fitting

ACSR weasel conductor

11 KV VCB O/G CTR 200/100/5A 350 MVA

11 KV Cables 3x185 sq. mm XLPE for feeder.

11 KV Cable jointing kit heat shrinkable type for 185 sq. mm I/D type.

11 KV Cable jointing kit heat shrinkable type for 185 sq. mm O/D type.

Cable LT ABC (3X50+1X35+1x16) sqmm

G.I. wire 8 SWG

Stay set complete

Stay Set Complete LT

Earthing complete

11/0.4 KV 25 KVA Transformer

11 KV TPMO

Distribution Box three Phase with clamp

Gaurding Angle 1.6mtr. Long

LT XLPE cable 1x240 mm

M.S angle lron 65x65x6mm, 4300mm long @ 5.8 Kg/Mt (bracing)

M.S.Channel 100X50X2240mm @ 9.6Kg/Mt. (Top channel & dropper)

MS Channel 100x50x2028mm (Dropper for Fuse set)

MS angle 75x75x6x2028 mm) with clamp & bolt and nut (T/F base)

MS Channel 125x65x2240 (Top)

MS Channel 125x65x1300mm Tee off

E- bracket with bolt & nut

F- bracket with bolt & nut

Berbed GI wire

Cross Arm holding clamp

Alluminium Binding wire-6 SWG

11 KV Fuse set

Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, nut, bolt washers would be provided by the contractor.

Single support of PCC pole 8.5 mtr long with LT Line.

Double pole structure on PCC. Pole 8.5mtr long complete with bracing for sectional double pole

Double pole structure on PCC. Pole 8.5mtr long complete with bracing for 25 KVA T/F

Double pole structure on PCC. Pole 8.5mtr long complete with bracing for cable exposer.

Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. brick, ballast, sand etc would be provided by the contractor.

Laying and sagging of 3 phase ACSR Weasel conductor from double pole at 33/11 KV substation to double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.

Laying of LT ABC (3X50+1X35+1X16) sq.mm for 11 KV L.T Line.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Guarding of HT/LT/Telephone Line/ Road/River Crossing etc. by providing G.S Earth wire 7/16 SWG/GI wire No. 8/10 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support as per RESSPO norms. All type nut &bolts, would be given by the contractor.

Fixing of 3 Phase distribution box on pole including proper clamping. All material would be provided by firm.

Fixing of danger board and G.I barbed wire on each pole including proper clamping. All material would be provided by firm.

mounting of transformers on double pole and laying of cable jumpering and making all HT/LT connections complete work in all respect .

Laying of double circuit 11 KV Cables 3x185 sq. mm XLPE for feeder in normal soil by digging of trench 01 Mtr. depth and laying layer of sand with providing bricks top and both side of cable including refilling of trench. (Only 11 KV XLPE cable provided by Department)

Fixing of 11 KV Cable jointing kit heat shrinkable type for 185 sq. mm ID & OD type.

Fixing of 11 KV VCB O/G CTR 200/100/5A 350 MVA for Sub-station complete work in all respect.

mounting of transformers on double pole and laying of cable jumpering and making all HT/LT connections complete work in all respect .

Fixing of TPMO complete work in all respect.

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of site incharge.

DURGESH CHANDEL

Bharat Trading Corporation