Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
27 Aug 2026, 10:30 pmClosed
Karnataka Power Corporation Limited
Prathibha Rani
Overhauling & Emergency works of Turbine auxiliaries of condensate system, HPBP/LPBP system, Turbine drain system & Seal steam header system.
KPCL/2026-27/PS/WORK_INDENT4485
KPCL/2026-27/PS/WORK_INDENT4485
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer TM1 Office RTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidder shall have experience in Maintenance of Turbine and Auxiliaries of thermal power station of capacity 210MW or above. For which bidder shall upload work order copy.
The intending bidder should have satisfactorily completed, as a prime contractor at least one similar work such as Overhauling and Emergency works of Turbine auxiliaries of CEP/LP heaters /HP Heater/BFP / HP-LP bypass system / High pressure line drain valves / Turbine stop valves / control valves / Turbine actuators of value not less than Rs. 47.85 Lakhs in the last five years (2021-22, 2022-23 2023-24, 2024-25 & 2025-26) in any thermal power stations of capacity 210MW or above. As a proof of this, the bidder shall upload single work order and corresponding work done certificate issued by competent authority. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited).
The intending bidder in his name should have achieved an average annual financial turnover of Rs. 95.70 Lakhs, in at least two financial years during the last five years (2021-22, 2022-23 2023-24, 2024-25 & 2025-26). As a proof of this the bidder shall upload the certified copy of the Profit and Loss account or Turnover certificate duly certified by the Chartered Accountant. (Financial Turnover of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited)
₹2,030
₹1.6 L
12 Aug 2026
12 Aug 2026
29 Aug 2026
25 Aug 2026
Overhauling & Emergency works of Turbine auxiliaries of condensate system, HPBP/LPBP system, Turbine drain system & Seal steam header system.
Replacement of gland packing of CEP
Cleaning of suction strainers of CEP.
Overhauling of discharge valves of CEP.
Overhauling of suction valve of CEP.
Inspection of Bearing [Thrust & Journal].
Overhauling of NRV's of CEP.
Overhauling of CEP.
Inspection, Rectification of CEP canister:
Temporary fixing & removal of suction strainer mesh of CEP in unit-4
Cleaning of EOT crane components like LT,CT,Operator cabin, Pendents,Carriages, Double girder rails etc. & greasing of bearings, wheels etc.
EOT crane Brake shoe/thrust or springs adjustment and Gear box oil level inspection & top-up
Overhauling of seal steam supply and leak off steam control valves.
Overhauling of actuators of seal steam supply & leak off contrl valves.
Replacement oil & cleaing of filters of actuators of seal steam spply & leak off contrl valves.
Servicing of supply /leak off steam bypass valve.
Checking of N2 gas pressure and filling if required
Overhauling of HPBP valves without seat replacement.
Overhauling of HPBP spray contrl valves with seat replacement.
Overhauling of HPBP / U4 LPBP spray control valves without seat replacement.
Overhauling of actuators of in BP -1 & BP -2 valves of HPBP sys.
Overhauling of actuators of BD, BPE-1 & BPE -2 valves of HPBP sys.
Overhauling of HPBP sys oil unit OV - 32B.
Overhauling of HP bypass valves without seat replacement in Unit -4
OH of LPBP system oil unit in UNIT-4
Inspection of tubes of LPH.
Overhailing of gauge galss of HP/LP Heaters.
Inspection of tubes of LP heaters and replaceing gasket between shell & tube plate
Providing assistance for performing turbine & LPBP governing charecterstics & feed back checking of servomotors,cleaning of damping device etc..
Servicing of servo motor & changing of gland packing on both sides OF CRH NRV
Overhauling of CRH NRV's
Overhauling of turbine extrctn NRV's.
Cleaning of rotary filter of governing system , LPBP system
Servicing of Test valve/Pilot valves.
Repair /service of MO actuators of size up to 300NB
Checking of the manual operation, attending minor repairs (repairs without dismantling actuator) and replacement of lubrication of MO actuators.
Replacement of flange /bonnet gasket (including isolations) upto 100 mm
(At MS,HRH,CRH,turbine pipings, LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and related works)
Replacement of flange /bonnet gasket above 100 mm to 200 mm(including isolations)
(At, MS,HRH,CRH,turbine pipings, LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and related ...
Replacement of flange /bonnet gasket (including isolations) above 200 mm to 450 mm
(At, MS,HRH,CRH,turbine pipings, LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and related ...
Providing assistance for attending of unforeseen emergency works
Replacement of gland packing of Gate/Globe Valves of size 50 to 450 NB
Inspection/servicing of valves & NRV's: HO/MO/valve size 50 mm to 250 mm
Servicing of motorized/ hand operated valves & NRV's of sizes 250 mm & above
Replacement of gland packing of valves up to 50 mm
Servicing of MO/HO high pressure valves of Valves of size up to 50 mm
Servicing of MO/HO high pressure valves of Valves of size 65 NB to 100 NB".
Servicing of valves in oil lines of size 1".
Servicing of valves in oil lines of size 2"to 6"
Replacement of valves of size up to 100 mm
Replacement of valves of size above 100 to 250 mm
Replacement of bends/reducers/elbow of water & steam lines per joint, including welder below 100 mm
Attending of small welding cracks in pipes and other welding works
Replacement of LP pipe lines size: upto 150mm
Replacement of LP pipe lines size: above 150 mm
Replacement of HP pipe lines size: upto 150mm
Replacement of HP pipe lines size: 200 to 300 mm
Replacement of bends/reducers/elbow of water & steam lines per joint, including welder above 100 mm
Overhauling of GSC/MOT oil vapour extraction fans
Supply and erection of Oil vapour extraction fan of Make along with wafer Butterfly valves
Consumables ( As per annexure-A)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid documents 2026-27.doc
Tender Document • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .