SPL REPAIR OF BLDG NO-07 AT MOTI MANDIR ENCLAVE AND ROOF SHEETS AT HQ 16 CORPS CAMP UNDER GE NAGROTA

Amount

AGE B/R-II Portion

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and not exc 4 sqm and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided complete all as specified and directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed.

Pressed steel frames factory for doors made out of 1.25mm thick PBI sheet with one or more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete with one shop coat of primer size of frame 125x60mm complete all as specified and directed.

Pressed steel frames factory for doors made out of 1.25mm thick PBI sheet with one or more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete with one shop coat of primer size of frame 105x60mm complete all as specified and directed

Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in openings as per specification & drawing complete all as specified and directed.

S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding complete all as specified and directed.

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia complete all as specified and directed.

S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Hold fast/clamps of mild steel stay for rain water pipes etc confirm to Fe-290 Gde E 165 complete all as specified and directed.

S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of primer after preparation of surfaces before fixing complete all as specified and directed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of primer after preparation of surfaces before fixing complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings complete all as specified and directed.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats complete all as specified and directed.

S&F 19mm thick prelaminated particle board, interior grade water and termite proof prelaminated one side with decorative choice lamination and other side balancing white lamination as in cupboard shutter complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed.

S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane complete all as specified and directed.

All as per Srl item No 27 here-in-before but figured glass complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 all as specified using old size bricks complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally) complete all as specified and directed.

M & L for Rendering 15mm thick (10mm+5mm) in two layer in cement plaster 1:4 on in two layer other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed(WPC measured and paid separately) Note:-WPC to be used and measured only in top layer(5mm) of plastering.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&Lfor Roghening surfaces of old concrete surfaces of any description over damaged surfaces irregular fascia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed

M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment applying two coats of cement base paint old wall surface complete all as specified and directed.

M&Lfor two coats of white wash on newly /old plastered surface on wall including preparation of surface complete all as specified and directed.

Preparation of plastered surfaces of ceiling and applying two coats of white washing complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axes and applying a coat of cement slurry @ 03 Kg/Sqm of surface complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm (single piece) as in riser of steps, skirting, dado and pillars over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM ( 1:3) complete all as specified and directed.

M & L for 62 cm wide Udaipur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and directed.

All as per srl item No 46 here-in-before but of size 550x 75 - 100mm (as on edges of cooking plateform -ditto- complete all as specified and directed.

M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4 complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough complete all as specified and directed.

M & L for glazed ceramic tiles 450x300x7mm thick as on walls/ vertical surfaces over and including 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 75mm thick ) finished even and fair complete all as specified and directed.

M&L PCC 1:2:4 Type B1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating on top of chajjas including necessary formwork complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

All as per srl item No 53 here-in-before but 6mm to 8mm dia -ditto- complete all as specified and directed.

S&F Framed work rolled section as in framing compound girder staging for water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete all as specified and directed.

Dismantling of water tanks and removing to store of capacity exc 250 Ltr & not exc 500 ltr etc complete all as specified and directed.

Supplied and fixed Rotational moulded polyethlene water storage tanks three layered of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) white in colour hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Taking down steel tubing and connection including removal to store bore of pipe 15mm complete all as specified and directed.

Taking down steel tubing and connection including removal to store bore of pipe 20mm complete all as specified and directed.

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down complete all as specified and directed.

M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed.

S&F Shower rose brass chrominium plated 125mm size complete all as specified and directed.

S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe complete all as specified and directed.

S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia bore of pipe complete all as specified and directed.

All as per item No 65 here-in-before above but with long shank and cup ( concealed type) complete all as specified and directed.

S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm) complete all as specified and directed.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,screwed for iron pipe 15 mm bore fancy type complete all as specified and directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore complete all as specified and directed.

S&F PVC (SWR) Bends any radius for 110mm bore complete all as specified and directed.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door complete all as specified and directed.

S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors complete all as specified and directed.

S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm complete all as specified and directed.

All as per srl item No 79 here-in-before above but 110mm complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

S&F 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed in repairs complete all as specified and directed.

S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring complete all as specified and directed.

Dismantling brick tiles or terracing tile, single layer on roof including mud phuska complete with cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof complete all as specified and directed.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC to be mesured and paid for separately.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specified and directed.

One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed. (Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). Note:- S&F of APP based polymeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

Taking down existing cement plaster of sunken floor/wall,roughening and cleaning by brushing wire brushes to remove all dirt, withand including applying a coat of industerial bitumen 85/25 penetration @ 1.20kg/sqm over and including rendering 15mm thick in CM 1:3 using WPC finished rough over a coat of neat cement slurry @ 3.0kg/Sqm complete all as specified and directed. ( wpc to be paid measured and seperately).

S&F as in repair kitchen rack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm with weight not less than 8 Kg fixed on wooden gutties complete all as directed by Engr-in-Charge.

S&F sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Disconnecting exsisting water tanks exc 250 & n. exc 500 Ltr capacity, setting aside (or lowering if required) and cleaning and removing all scale and dirt etc from tanks and from mouths circulating pipes and reconnecting and re-fixing in position complete all as specified and directed.

AGE B/R-I Portion

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings includings wind tie.

M&L for Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strengh of 550Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strengh of 550Mpa as in roof ridge/covering/cladding to wall fixed with self tapping screw complete all as specified and directed.

Dismantlilng wall & ceiling boards(fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

S&F aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling 4mm dia suspenders with butterfly clips, wall angle of size 24x24mm, main runner (teee) of size 24x38mm, cross tee of size 2x28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 4mm thick non asbetos fibre cement plain building boards fixed to aluminium snap grid and providing one coats of oil bound distemper including preparation of surfaces all as specified and as directed.

M&L for wind tie, drilled and countersunk for roofing including securing bolts Fe-290 Grade 165 complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L preparation of old decorated plastered or unplastered surface including complete removal by machinery only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of oil emulsion distemper on walls over 1mm thick wall care putty all as specified and as directed by Engineer-in-Charge.

AGE E/M Portion

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge.

Taking down ceiling fan/Exhaust fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete, all as specified and directed by Engr-In-Charge. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

Taking down existing electric water heater any capacity, keeping aside safely & refixing the same to its original position after servicing of the whole geyser/making functional and after completion of wiring work, complete all as specified and directed by Engr-In-Charge. Note: If any part found unserviceable during the refixing of water heater at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

M&L for Concealed Point wiring using 1.5 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 Volt grade 1.5 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor earth wire drawn in and including PVC Conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc incl testing and making good to disturbed surface to match existing surface. (Note :- cost of modular boxes, Suitable modular switch base, frame & cover is included in quoted rate.)

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5 Amp

(c) One socket out let 5 Amp controlled by one switch on same board.

(d) One socket out let 5 Amp controlled by one switch on independent board.

(e) One bell point 5 Amp controlled by one bell push on independent board.

(f) One light point controlled by two, 2 way switches 5 Amp

All as per srl item No 106 here in before but point wiring with 2.5 sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independent board complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of hole of required size complete all as specified and directed. Make: Bajaj Maxima or equivalent

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular socket 2/3 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate insulated body complete all as specified and directed.

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F for LED bulb 9 watt rechargeable type complete all as specified and directed.

S&F Modular bell push piano type 5 Amps complete all as specified and directed.

S&F electric bell ding dong 230 volt AC complete all as specified and directed.

S & F LED light fitting 1x15 watt Polycarbonate bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs complete all as specified and directed.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCCB DB load link VTPN 4 way suitable for MCCB as incomer, 125 Amp,4 Pole. (when MCB's are to be used) with suitable size of busbar in and including MCCB 125A, 4 Pole, 16 KA as incomer complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed.

M&L for sheet box fabricated out of 2 mm thick CRCA sheet powder coated of size 60x60x25 cm duly compartmentalized suitable to accommodate 4 Nos Energy Meter independently. each compartment shall be provided with suitable door and 2 Nos fancy lock, complete, all as specified and directed by Engr-In-Charge incl taking out existing wooden meter box complete all as specified and directed. Notes:- 1. Meters shall be fixed on Hylam sheet inside the compartment with nut bolts and making connections with suitable size copper conductor cables. 2. Meter box shall be fixed on angle iron frame duly grounting on wall with fasteners, nut bolts and washers complete all as directed.

S&F building security light luminaries energy saving and environment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistive of IK07, including GI bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on complete all as specified and directed.

BHARTI CONSTRUCTIONS (BID ID -3484164)

M/S SHREE SIDDHI VINAYAK CORPORATION (BID ID -3478716)

M/S MANISHA BUILDERS (BID ID -3478739)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3478614)

R.K. Works (BID ID -3478627)

M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3478749)

STAR CONSTRUCTIONS (BID ID -3484158)