REPAIR TO HARDSTANDING, FENCING, DRAIN, CLEANING AND REPAIR TO SEWAGE LINE/ SOAKAGE WELL SEPTIC TANK ,WATER SUPPLY GATE AND OTHER MISC WORKS AT AGE B/R III UNDER GE 969 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site, complete all as specified and directed.

M&L for 150mm thick Cement Concrete (1:4:8) type D-2 using (40mm graded crushed stone aggregate) as in sub base of floors and pavings, complete all as specified and directed.

Taking of liquid/solid content from sump/septic tank either manually or by pumping clearing thoroughly including disposal of liquid/solid content out of the defence area, depositing in put and covering with layers of earth complete all as specified an directed (Note- The desludgging will be carried out mehnically by honey sucker machine etc) .Complete all as specified and directed by Engineer-in-Charge.

M&L Cement Concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and finishing the surface with brooming incl spike rolling, complete all as specified and as directed.

M&L formwork to edges of concrete floor/pavement/hardstanding etc complete all as specified and as directed.

M&L forming 12mm thick expansion joints filled with pre-formed bituminous fillers and top 30mm primed and sealed with sealing compound grade `A' of 100mm thickness of slab/floor, complete all as specified and as directed.

M&L forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade `A' complete all as specified and as directed.

M&L for moorum filling in road side berms not exe 15 cm thick spread levelled and rammed incl watering complete all as specified and as directed.

Dismantling structal steel as in gate door but excluding framed work etc complete all as specified and as directed.

Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick work or stone masonary built in CM including all quoins arches pillars etc all as directed but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

M&L RCC Type Nominal Mix (20mm graded crushed aggregate) as in , columns, drain cover, Drain etc complete all as specified and as directed.

Steel work in tubular trusses, as in gate ,post , including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to, complete all as specified and as directed.

Mild steel (MS Angle Iron) as in posts and struts in fencing including cutting tops shape as directed welding, drillied notching for wire etc including all necessary drilling etc. and similar work conforming . Unit rate is also included for locking holes after fixing of barbed wire and welding to bent portion.

M&L for two coats of synthetic enamel painting over one coat of red oxide primer including preparation of new steel/iron surfaces, complete all as specified and as directed.

M&L Machine pressed 60 mm precast concrete inter locking paver block any shape with grey cement and pigment over 25mm sand filling size conforming to IS 45658-2006 of 60mm thickness,M-35 Grade complete all as specified and as directed.

M&L Chequred coloured tile size 300x300x20 mm using table vibrator or equivalent as in jointed and pointed in neat cement slurry over and included 15 mm screed cement mortar (1:6) and pigment size conforming complete all as specified and as directed.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L sand filling under inter locking paver including watering and consolideration complete all as specified and as directed.

M&L for providing PCC Type B-1 (1:2:4) (using 20 mm graded crushed stone aggregate) in ladings, cover slabs (for manholes etc.) chullah hoods, chajjas, water throughs, mangers, shelves and similar articals with plain faces set in CM (1:6) complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type, B-1 (using 20mm graded crushed stone aggregate) as in coping,benching including all necessary form work complete all as specified and as directed.

S & F 100 mm thick cement concrete type C-2 (1:3:6), (40mm Graded agg) of rough and even surface complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using (40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan n.exceeding 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6), complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work on concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified. (using integral liquid water proofing compound which will be paid separately) complete all as specified and as directed.

Extra for forming fair forming fair finished drain or channel 30 cms inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and as directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 fixed as in repairs complete all as specified and as directed.

M&L in repair for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S& F Welded steel wire mesh febric fixed complete to steel members. Weight per sqm exc 4kg complete all as specified and as directed.

M&L for complete removal of old material from plastered surface and applying one coat of asian primer and two coats of weather proof emultion paint for wall ,facia, chajja, and roof projection etc complete all as specified and as directed.

S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured) complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth, applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

S&F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete all as specified and as directed.

S&F PVC (SWR) bend any radious 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and as directed.

S&F PVC(SWR) reducers 75/110mm bore complete all as specified and as directed.

S&F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC (SWR) 110mm Junction single (single T) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor complete all as specified and as directed.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and as directed.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore complete all as specified and as directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical) vertical with closed top ) hoisted and fixed in poisition all as specified in SSR Part I of 500 ltrs complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical) vertical with closed top ) hoisted and fixed in poisition all as specified in SSR Part I of 1000 ltrs complete all as specified and as directed.

Note:- Schedule of credit Rs. 99,875.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S ESS EMM ENTERPRISES

m/s mohd rafiq lone

M/S ABDUL MAJID LONE

Javeed And Co

M/S S S TRADERS