Building Work

Earthwork excavation for foundations of building and depositing the earth on bank with an initial lead of 10m and initial lift of 2m in ordinary gravelly soils including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T&P, labour charges etc complete for finished items of work (APSS No 308)

Filling with Sand in trenches, sides of foundations & basement by watering and ramming including all operational, incidental, labour charges, hire charges of T&P etc complete including cost and conveyance of material and labour charges etc complete for finished item of the work (APSS No 309& 310)

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR)

Plain Cement Concrete (1:5:10) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) (CSSR)

RR Masonry in CM (1:8) including Cost and Conveyance of all materials and labour charges etc., Complete.

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Footings

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Columns

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Plinth Beam

Filling with Gravel in trenches,sides of foundation and basement with initial lead in layers not exceeding 15 CM thick,consolidating each deposited layer by watering and ramming including cost and conveyance of all labour charges etc., complete

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work For Lintels

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work For Roof Level Beams

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Roof Slab 150mm thick

Brick Masonry work in CM (1:6) prop with FlyAsh bricks of size 225X100X60 mm having a crushing strength of not less than 50.00kg/cm2 for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete for walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for Internal faces of walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for External faces of walls

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) (BMT-P.80.A)

Flooring with Telephone black granite 18-20mm stone set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps Telephone black Granite 18-20mm thick slabs other than black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Sai coat texture of average 2 to 3 mm thickness over plasterised surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean and wipe off loose dust, applying texture paint filter by putty knife/muslin pad air dry for 2 to 3 Hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.., complete for finished item of work for internal walls excluding cost of access scafolding (BMT-J.40) for Slab Ceilings & Internal Walls,External walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Sai coat texture of average 2 to 3 mm thickness over plasterised surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean and wipe off loose dust, applying texture paint filter by putty knife/muslin pad air dry for 2 to 3 Hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.., complete for finished item of work for internal walls excluding cost of access scafolding (BMT-J.40) for External walls

Painting to new walls with 2 coats of synthetic polymer plastic emulsion paint having VOC (Volatile Organic Compound) content less than 50 gms/lt of asian /berger /nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of synthetic polymer plastic emulsion paint having VOC (Volatile Organic Compound) content less than 50 gms/lt of asian /berger /nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for external walls

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Fabrication, supply, and erection of tubular steel roof truss using ISMC 175 for Rafters complete as directed by the Engineer-in-charge. The truss shall be fabricated with proper cutting, welding, jointing, and fixed over RCC columns using base plates, cleats, anchor bolts, and necessary supports. All steel surfaces shall be cleaned, given one coat of red oxide primer, and finished with two coats of synthetic enamel paint of approved brand and shade. The rate shall include cost of all materials, labour, transportation, tools, scaffolding, and all other incidental charges for the complete for finished item of work.

Fabrication, supply, and erection of tubular steel roof truss using RHS 142x82x4.8 mm thick for bottom and slop members for Rafters and all eaves and king post are made with 60 x40 x3.6mm thick complete as directed by the Engineer-in-charge. The truss shall be fabricated with proper cutting, welding, jointing, and fixed over RCC columns using base plates, cleats, anchor bolts, and necessary supports. All steel surfaces shall be cleaned, given one coat of red oxide primer, and finished with two coats of synthetic enamel paint of approved brand and shade. The rate shall include cost of all materials, labour, transportation, tools, scaffolding, and all other incidental charges for the complete for finished item of work.

Fabrication, supply, and erection of tubular steel roof truss using RHS 60 X 40 X3.6 for Rafters complete as directed by the Engineer-in-charge. The truss shall be fabricated with proper cutting, welding, jointing, and fixed over RCC columns using base plates, cleats, anchor bolts, and necessary supports. All steel surfaces shall be cleaned, given one coat of red oxide primer, and finished with two coats of synthetic enamel paint of approved brand and shade. The rate shall include cost of all materials, labour, transportation, tools, scaffolding, and all other incidental charges for the complete for finished item of work.

Supply and fixing of SS Hand Railing 304 Grade with Top rail of 50mm Dia 1.8mm thick Pipe, Vertical Post of 40mm Dia 1.6mm thick Pipe and 3 rows of Horizontal rails of 20mm Dia Pipe fixed with base plate of 50mm dia and drilling of 40mm dia holes incl Cost and Conveyance of all materials to work site and all operational, incidental, labour charges etc., Complete for finished item of work

Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats,weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding 4 mm thick

Construction of Toilets Earthwork excavation for foundations of building and depositing the earth on bank with an initial lead of 10m and initial lift of 2m in ordinary gravelly soils including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T&P, labour charges etc complete for finished items of work (APSS No 308)

Filling with Sand in trenches, sides of foundations & basement by watering and ramming including all operational, incidental, labour charges, hire charges of T&P etc complete including cost and conveyance of material and labour charges etc complete for finished item of the work (APSS No 309& 310)

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR)

Plain Cement Concrete (1:5:10) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) (CSSR)

RR Masonry in CM (1:8) including Cost and Conveyance of all materials and labour charges etc., Complete.

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Footings

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Columns

Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Plinth Beam

Filling with Gravel in trenches,sides of foundation and basement with initial lead in layers not exceeding 15 CM thick,consolidating each deposited layer by watering and ramming including cost and conveyance of all labour charges etc., complete

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Lintels

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Roof Level Beams

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Roof Slab 125mm thick

Brick Masonry work in CM (1:6) prop with FlyAsh bricks of size 225X100X60 mm having a crushing strength of not less than 50.00kg/cm2 for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete for walls

Reinforced Brick Masonary walls of 11.5cm in CM(1:3) using FlyAsh bricks of size 225X100X60 mm having a crushing strength of not less than 50.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for Internal faces of walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for External faces of walls

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) (BMT-P.80.A)

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Daddoing to walls with glazed red or white full body ceramic wall tiles of Size 300 x 600 mm thickness 6 mm and 1st quality to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:5), 12 mm thick including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Sai coat texture of average 2 to 3 mm thickness over plasterised surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean and wipe off loose dust, applying texture paint filter by putty knife/muslin pad air dry for 2 to 3 Hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.., complete for finished item of work for internal walls excluding cost of access scafolding (BMT-J.40) for Slab Ceilings & Internal Walls,External walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Sai coat texture of average 2 to 3 mm thickness over plasterised surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean and wipe off loose dust, applying texture paint filter by putty knife/muslin pad air dry for 2 to 3 Hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.., complete for finished item of work for internal walls excluding cost of access scafolding (BMT-J.40) External walls

Painting to new walls with 2 coats of synthetic polymer plastic emulsion paint having VOC (Volatile Organic Compound) content less than 50 gms/lt of asian /berger /nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of synthetic polymer plastic emulsion paint having VOC (Volatile Organic Compound) content less than 50 gms/lt of asian /berger /nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for external walls

Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Supply and fixing of SS Hand Railing 304 Grade with Top rail of 50mm Dia 1.8mm thick Pipe, Vertical Post of 40mm Dia 1.6mm thick Pipe and 3 rows of Horizontal rails of 20mm Dia Pipe fixed with base plate of 50mm dia and drilling of 40mm dia holes incl Cost and Conveyance of all materials to work site and all operational, incidental, labour charges etc., Complete for finished item of work

Provision for Electrification Supply and Fixing of 25mm dia 1.8 mm thick PVC pipe (ISI MARK) concealed in walls with all required accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. as directed by Engineer in Charge

Supply and run of 1 of 22 /0.3mm (1.5Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for Inverter Connections including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall.

Supply of 18" (450mm) Wall mounting / Pedestal Air Circulators including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD70, .etc., complete. Makes : As per list of recommended brands as category I.

Supply and fixing of........ LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supply and Installation of Wall mounted 30W Cabinet Loudspeaker, High-fidelity music and speech reproduction, Selectable 8 ohm, 70 V and 100 V inputs, Compact yet robust ABS enclosure, Supplied with adjustable mounting bracket, Complies with international installation and safety regulations. Makes: As per list of recommended brands.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).

Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.

Providing of Independent Chemical earthing after excavating and earth PIT. The Earth electrodes, 50mm dia, wall thickness, 3.25mm, 3 mtr long copper binded (250 MICRONS) MS Pipe, Strip in Pipe System Fitted with 40X6X3100mm copper bonded strip from top to bottom, terminal hole of 12mm, Pipe filled with conductive crystal line compound, including 2 bag of earth life Compound (25 Kgs Each) as Per IS 3043. with earth inspection chamber of dimensions: Width: 320 mm x 320 mm, Height: 192 mm, Weight: 30 Kgs, Load bearing capacity: 5000 Kgs including drilling of bore in any kind of soil.

Supply and transportation of 30 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete.Makes : As per list of recommended brands as category I.

Provision for Sanitation Suppllying and fixing Prince/Sudhakar or equivalent ISI make PVC SWR grade Pipes of type B class and specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing 110 dia PVC make up piece with inlet connections, providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding where required, providing supports for pipes laid in false ceiling using G.I.hangers fixed to R.C.C slab including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials, etc., complete. 110mm dia 4kg/ sq.cm single socket upvc waste pipe

Supplying & Fixing Indian makeFlat Back Wash Hand Basin of size 630 x 450 mm1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including including cost and conveyance of all materials to site, labour charges ,excluding overheads & contractors profit for finished item of work. wooden block: - SingleC.P. Pillar cock

Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stopcock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work inall respects: White Colour

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated

Supplying and fixing 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings 1st quality ISI marked with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying & fixing 15 mm bib tap with flange Chromeum plated Jaquar make queen series

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position as directed by Engineer-in-Charge.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 28.60mm ODPipe - SDR 11

Supply and fixing of 110 mm dia ISI mark PVC rain water spouts of 4 Kg/cm2 pressure including Cost of necessary pvc bends, shoes and M.S.clamps and all other accessories and fixing in position including cost and conveyance of all materials to site , seigniorage charges sales and other taxes on all materials, all operational, incidental and labour cahrges such as fixing in alignment etc., complete for finished item of work