DEMOLITION AND RECONSTRUCTION OF BOUNDARY WALL OF ADETRA LAND AND NAVAL BASE AT INS DWARKA OKHA GUJRAT UNDER GE NAVY PORBANDAR

Amount

Excavation in trenches n exc 1.5m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, pier holes, erecting poles etc. not exceeding 10 sqm on plan and getting out in soft disintegrated rock complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, pier holes, erecting poles etc. not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, pier holes, erecting poles etc. not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and exceeding 1.5 m in depth but not exceeding 3.0m for foundations, shafts, wells, cesspits, pier holes, erecting poles etc. not exceeding 10 sqm on plan and getting out in Soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate ) as in foundation, filling & mass concrete complete all as specified and as directed.

M & L for RCC M-30 Design Mix in foundation incl rafts, footings, foundation ,plinth beam underreamed piles and mass concrete complete all as specified and as directed.

M & L for RCC M-30 Design Mix in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L for RCC M-30 Design Mix in beams, cantilevers,bressumers,lintels and coping over 1.5m span complete all as specified and as directed.

M&L for Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel CRS TMT bars 5 mm dia and over upto and over upto and including 10 mm dia in stirrups ,spaces and binders complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid block of PCC 1:3:6 type C1, using 20 mm graded stone aggregate , exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed.

M&L for 12 mm thick modified polymer ready mix plaster to Concrete surfaces boundary wall finished even and fair, complete all as specified and as directed.

M&L for use & waste of Formwork (square, reactangular or polygonal ) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work for fair finished surface of concrete; vertical or to batter complete all as specified and as directed.

M&L for use & waste of Formwork (square, reactangular or polygonal ) to sides of pillars, posts, struts, piers, columns and stanchions for rough surface complete all as specified and as directed.

M&L for use & waste of Formwork to sides and soffits of floor or roof beam,beam haunchings,girders,bressum-mers,lintels,band,cantilevers,coping,shelves including supports,overhangs, etc, also splays between floors and beam for rough finished surface complete all as specified and as directed.

S & F for Hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F for framed work Fe 410-W (gde-E-250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and haniging; also fastening and fixing complete all as specified and as directed.

S&F for plates (plain or chequred) square cut are nothced (ordinary) and counter sunk, forming holes and fixed as directed including necessary welding as required as in stairs, cable duct covers etc complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S & F for Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Returning , filling in , incl spreading , levelling, watering and well ramming in layers n. exc 25 cm in soft/disintegrated rock complete all as specified and as directed.

Returning , filling in , incl spreading , levelling, watering and well ramming in layers n. exc 25 cm in soil complete all as specified and as directed.

Removal of excavated material as soft/disintegrated rock to a distance exc 250 m but n.exc 500 m and depositing where directed.

Removal of excavated material as soil to a distance exc 250 m but n.exc 500 m and depositing where directed.

Formig 'V' grooves in plaster not exceeding 10mm deep and not exceeding 10mm on face complete all as specified and as directed.

M&L for broken glass coping on top of wall in cement mortar 1:3 complete all as specified and as directed.

S & F Bitumen dip Concertina coil, punched tape 2.60mm dia high tensile spring steel wire, dia of coil 610mm, when stretched the length shall be 6m in one coil and tied to barbed wire with and incl provision of steel slips @ 5 clips spiral in one row complete without coating complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Dismantling barbed wire of any description complete all as specified and as directed.

M&L for erecting of steel tubular swaged poles swan neck type complete with cast iron base plate, finial taper plug, Cap, mild steel bolts, nuts,screw, etc. type 410 SP-31(9.0 meters long) including applying two coat of red oxide and two coats of aluminium paint over a coat of red oxide (externally from top coaping) including up to 1.20 metre height from ground level in 30 cm alternative black and yellow strips writing MES Pole No font with white colour synthetic enamel paint (first grade/quality)complete all as specified and directed.

M&L for plain cement concrete 1:4:8 (40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 (20mm graded stone aggregate) as in coping, etc. including formwork , complete all as specified and as directed.

Supply and Fixing of new generation energy saving and environmental friendly long life LED security light 70W, made up of pressure die cast aluminium housing with high power LED as lighting sourse and lens embedded PC cover having Top Opening separate driver with IP 66 protection complete in pole/post/wall position by connecting the electrical connection and tightening the nut,bolts and clamps and all as specified and directed. Cat No :- ENDURAPEARLPLUSSL70WLED757PASYTOPC Make :Havells or its equivalent of Bajaj/C&S

Supply and Fixing of hot press moulded SMC junction box smc base and smc door door fixed with hinge right side sintex box of size 250 x 200 x 100mm Cat No GS-JB-2520 with 10 Amps MCB SP, Bus Bar power connector for RYB-N fixed on epoxy base with the help of MS nuts bolts and MS clamps-2 Nos of size 40mm X 5mm thick .including fixing arrangement on pole complete all as specified and directed.

M & L for sand cushioning for LT cable laid in trenches using screened sand of approved quality as per SSR Part-I complete all as specified and directed.

S & F unreinforced pre-cast concrete cable covers class LV types 2 flat size 250mm x 150mm x 40mm including removal of old covers complete all as specified and directed.

Supply and laying/jointing GI Pipe light grade 40mm dia with all fittings laid/fixed on wall/pole or under road/PCC crossing complete all as specified and directed.

Material and Labour for hard rock Horizontal Boring/Cutting of Road/Foot Path minimum 1.5 feet from ground level for using through 40/80mm bore pipe for cable protection and finishing PCC after Boring/Cutting of road/Foot path, complete all as specified and as directed.

Supply and Laying in trenches or passing through pipe, LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts 25 Sqmm 4 core cross sectional area complete all as specified and as directed

Supply and Laying in trenches or passing through pipe, LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts 16 Sqmm 4 core cross sectional area complete all as specified and as directed

Supply and Laying in trenches or passing through pipe, LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts 6 Sqmm 2 core cross sectional area complete all as specified and as directed

Supply and fixing of P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial flexible FRLS insulated cable 1100 Volts 1.5 Sqmm 3 core IS 694:199 Connected light to sintex box complete all as specified and as directed. Make Polycab/Havells/Finolex

M&L for earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI strips 32 x 6 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and directed.

Supply and fixing of new generation post top energy saving environmental friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LED as light sourse Coral (opal) - IP65 suitable for pole dia 76 mm with 25 watt LED lamp complete all as specified and directed. Make :- Havells Cat No:- CORALPT25WLED757PSYMTOPC or its equivalent of Bajaj/CG

J J ENTERPRISES

JAMNAGAR ELECTRIC AND MACHINERY CO

natwarsinghdipsingh

Nitesh Enterprise