2nd CALL PROVIDING AND PLACING OF FURNITURE EQUIPMENTS FOR SIMULATION AND INNOVATION LAB AT FIRST FLOOR KUMAON UNIVERSITY CAMPUS, BHIMTAL, DISTT NAINITAL

Amount

CONFERENCE ROOM

Providing & placing conference table in which top of talk membrane shall be 25 mm thick base material sall be 25 mm MDF board plus 0.4 mm PVC membrane foil using wrap around technology . The foil shall be pre - coated with PU layer for better scratch and wear resistance . There shall be 0.6 mm thk balancing laminate on bottom surface . The Squeeze Leg Assembly shall be nickel chrome plated made from Dia 50.8 x 1.6 mm thick MS ERW tube . Legs shall be Assembeled together with a plastic glide at bottom and a powder coated leg connector made from aluminium alloy at top . Cross Member and connectors shall be powder coated cross member made from 1.5 mm thick aluminium extrusion fixed with work surface by plastic moulded table support connector . Powder coated connectors made from Aluminium alloy fixed at both ends of cross members . Squeeze Leg Assembly and connectors are assembeled together to strengthen complete understructure . Laminate Modesty shall be 18 mm thick base material shall be 16 mm Plain particle board . Post - Laminated with 0.6 mm Top laminate on either side also there shall be 2 mm thick PVC edge banding of matching colour on outer edges of modesty . Work surface and Modesty are assembeled together with powder coated Modesty bracket made from 2 mm thick MS sheet . Metal Perforated Modesty shall be 18 mm thick Powder coated metal perforated modesty with stiffener made from 0.8 mm thick MS sheet . Work surface and Modesty are assembeled together with powder coated Modesty bracket made from 2 mm thick MS sheet . The Access Flap and Switch Mounting Tray shall be made from Matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/ data /voice sockets access from top . Powder coated switch mounting tray made from 0.8 mm and 1.5 mm MS sheet .Switches to be mounted on tray as per requirement as per approval and direction of Engineer in-Charge.

Providing & placing High back chair made up of 12+/-01mm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam, moulded polyurethane foam of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat 510mm(W) x 480mm(D) and back of size 480mm(W) x 760mm(H), armrest top made up of moulded polyurethane and mounted on to a fixed type M.S. tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-15+/- 0.5mm. The mechanism of the chair have following features : 360 revolving type, front pivot synchro mechanism, tilt tension adjustment, single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. The backrest consist of a fixed type mechanism i.e no back up/down adjustment. The chair provided with pneumatic height adjustment which have stroke of 90 +/- 03 mm, pedestal fabricated from 02+/- 0.2cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap., size of the pedestal 660+/- 05 mm pitch-centre-dia (760 +/- 10 mm with castors), twin wheel castors made up of black nylon. Overall dimensions of Chair of, Width of Chair - 760mm, Depth of Chair - 760mm as measured from pedestal below. Height from ground - min 910 to max 1000mm. Seat height - min 460 to max 550mm. Dimensions tolerance / variations of within +/- 10 mm, etc. complete as per DWG NO. DF21, as per approval and direction of Engineer in-Charge.

Providing & placing mid back chair made up of 12+/-01mm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam, moulded polyurethane foam of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat 510mm(W) x 480mm(D) and back of size 480mm(W) x 645mm(H), armrest top made up of moulded polyurethane and mounted on to a fixed type M.S. tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-15+/- 0.5mm. The mechanism of the chair have following features : 360 revolving type, front pivot synchro mechanism, tilt tension adjustment, single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. The backrest consist of a fixed type mechanism i.e no back up/down adjustment. The chair provided with pneumatic height adjustment which have stroke of 90 +/-03 mm, pedestal fabricated from 02+/- 0.2mm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap., size of the pedestal 660+/- 05 mm pitch-centre-dia (760 +/- 10 mm with castors), twin wheel castors made up of black nylon. Overall dimensions of Chair of, Width of Chair - 760mm, Depth of Chair - 760mm as measured from pedestal below. Height from ground - min 910 to max 1000mm. Seat height - min 460 to max 550mm. Dimensions tolerance / variations of within +/- 1 0mm, etc. complete as per DWG NO. DF21, as per approval and direction of Engineer in-Charge.

HOD ROOM

Providing & placing premium excutive desk shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H. as per approval and direction of Engineer in-Charge.

Providing & placing cushioned high back chair having seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric, the insert moulded foam is assembeled over a load bearing plastic seat cover, back made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, size of back (W)485mm, (H)620mm & size of seat (W)510mm x (D)525mm.armrest of injection moulded with height adjustable up to 45+/-05mm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti- Shock feature. Spine bracket made of Aluminium die cast piece connecting back with mechanism. Neck rest assembly made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 45+/-05mm up-down and has regular adjustment of 30 degree +/-2 . The chair provided with pneumatic height adjustment which have stroke of 90 +/- 03 mm. The pedestal made up of die-cast polished aluminium. it of fitted with 5 nos twin wheel castor. The size of the pedestal of 660 +/- 05 mm pitch- centre-dia (760 +/- 10 mm with castors). The twin wheel castors of injection moulded in black nylon. Overall dimensions of Chair of, Width of Chair - 760mm, Depth of Chair - 760 mm as measured from pedestal below. Height from ground - min 1000 to max 1090 mm. Seat height - min 450mm to max 540mm. Dimensions tolerance variations of within +/- 10 mm etc. as per approval and direction of Engineer in-Charge.

Providing & placing visitor chair having seat made up of plywood and upholstered with moulded PU foam and Laminated mesh fabric. The back made up of two piece injection moulded frame. The inner frame of upholstered with mesh fabric and mounted on the main assembly. Size of chair of (W)550mm x (D)655mmx (H)980mm. The sled base leg frame welded assembly is made up of MS ERW round tube with base plate for seat fixing etc. complete. as per approval and direction of Engineer in-Charge.

Providing & placing three seater sofa with dimension (W) 2060 mm x (D) 905 mm x (H) 855 mm. The seat shall be made of PU foam with density 32 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. Height of seat shall be 450 mm. Back of the sofa shall be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shhall be made up of 1.2±0.1 cm. thick hot pressed moisture resistant and termite proof (as per IS:303) plywood and pinewoodof cross sections devoid of major knots & surface defects. Zigzag spring assembly of dia 3.8 mm and 6 nos. per seat shall be mounted in understructure for support and additional cushioning purpose. Leg assembly of sofa shall be a welded assembly made in stainless steel (grade ss 202) tube & plate.as per approval and direction of Engineer in-Charge.

Providing & placing glass center table. It shall be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. The center table understructure should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Dimension of the table shall be: (W) 1120mm x (D) 600 mm x (H) 351 mm. as per approval and direction of Engineer in-Charge.

Providing & placing glass corner table. it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a side : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Dimension of the table shall be (W) 600 mm x (D) 600 mm x (H) 351 mm. as per approval and direction of Engineer in-Charge.

R.H 900 mm ht C-Fraam assy .for table depths 770 mm wall side without upright ,1540 stand without upright & 920 mm wall side with upright

L.H. 900 mm ht C-Fraam assy .for table depths 770 mm wall side without upright ,1540 mm stand without upright & 920 wall side with upright

Common 900 mm ht C-Fraam assy .for table depths 770 mm wall side without upright ,1540 mm stand without upright & 920 mm wall side with upright

900 mm Ht Corner C-Frame table

600 mm Module length horizontal members

750 mm Module length horizontal members

1650 mm Module length horizontal members

1500 mm Module length horizontal members

1200 mm Module length horizontal members

1050 mm module length horizontal members

770 mm depth wall side without upright end cover panel

1540 mm depth island with upright & without upright end cover panel

Outer cover for single -sided Electrical Trunking

ISLAND WITHOUT UPRIGHT C-FRAME JOINING BRACKET

Rev Stool Mch HT ADJ + BACK HI BASE

Fixed type reagent shelf (Mai type)1650 L -Cutout: 6Module + 6Module (Total 2 Cutouts Ony)

Fixed type reagent shelf (Mai type)1200 L -Cutout: 6Module + 6Module (Total 2 Cutouts Ony)

1500 module length single side Electrical Trunking -Cutouts: 6Module + 6Module + 6Module

900 module length single side Electrical Trunking -Cutouts: 6Module + 6Module

1200 module length single side Electrical Trunking -Cutouts: 6Module + 6Module + 6Module

1050 module length single side Electrical Trunking -Cutouts: 6Module + 6Module + 6Module

WFU-C-SU-900-1S-LH-635H

WFU-C-900-1S-LH-635H

WFU-2S-1D-750W-635H

WFU-2S-1D-600W-635H

WFU-1S-RH-300W-635H

WFU-1S-1D-RH-450W-635H

WFU-1S-1D-LH-450W-635H

Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D)

WTC-1S-GS-LH-600W-635H

WTC-2S-GS-900W-635H

WT-2S-GS-750W-635H

WT-2S-GS-600W-635H

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing Gooseneck Model No. : 259924110 01 - 08

Gas Valve Single Laboratory Push/Turn Gas Valve Fitting Deck Mounted With Pop - Up Indicator Disc For Lpg Model No. :BT 2860I-231WSA (LPG)

Gas Valve Double At 180O Laboratory Push/Turn Gas Valve Fitting Deck Mounted With Pop - Up Indicator Disc For Lpg Model No. :BT 2860I-232SWSA (LPG)

Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk

Masking Tape

Silicon Sealant - Black

Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick)

Sr-998 Glue For Neoprene Mat. (Litres)

6/16A, 6 Pin Shutter Socket - Model No: M1332

6 Module Plate - Model No: Cs956M-S

16A, 1 Way Switch Model No: M0130

Anti-Siphon bottle trap Model : S 04 Make : Premier

Flexible/ F Serated Connector Model : HP 01 Make : Premier