Suplying materials for MGNREGS works

Stone for masonry work

Stone aggragate (single size) 40mm nominal size

Stone aggragate (single size) 20mm nominal size

Stone aggragate (single size) 10mm nominal size

Coarse sand(zone iii)

portland cement

wall form panel 1250x500mm

M.S Tube 40mm dia

Twisted steel/deformed bars

pvc end cap 110mm dia

gravel 5mm to 10mm

Red oxide zinc chromate primer

Mild steel tube hot finished welded type

G.I pipes 40mm dia

Fine sand ( zone 4)

anjili wood scantls

Wire nails

G.I pipes 50mm dia

100mm SCI trap with vent heel

polyethylene water storage tank with cover and suitable locking arragement

PVC pipe 63mm outer dia 6kgf/cm2

PVC pipe 63mm outer dia 4kgf/cm2

Beam clamp ( 300 - 380 mm )

Bitumen washer

Galvanised wire mesh ofaverage width of aperture 1.4 and nominal dia. Of wire 0.63mm

Stone aggragate (single size):06mm nominal size

PVC pipe 160mm outer dia.4kgf/cm2(Gutter pipe)

ACRYLIC EXTERIOR PAINT

Epoxy paint

Adjustable span , ( ESO+SI (2.35 - 3.40)

Adjustable telescopic prop 3m (2.02 - 3.75m)

White cement

PVC pipe 15mm outer dia. 10kgf/cm^2

Structured steels such as tees, angles, channels, and RS joists

PVC elbow 63mm dia.

PVC bend 63mm dia

PVC Tee 63*63*63 mm dia

PVC reducer 63*50 mm dia.

BLACK JAPAN

PVC end cap 63 mm dia

boulder, (50mm to 200mm)

C. P Brass tap (15mm)

CP brass waste , (32mm)

Ceramic glazed tiles , (Ceramic glazed tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy , bottle green black)

chanel shoulder , (100mm, 2.5m long)

CI bracket for wash basin and sinks

column clamp , (450*1070 mm )

CORNER ANGLE ( 45*45*5 mm , 1.50m long )

DOUBLE CLIP ( BRIDGE CLIP )

EXTERIOR PRIMER

Factory made door frame , (size is 50*47 mm with wall thickness 5mm made of single piece extruded profile)

flats upto 10mm in thickness

Flushing cistern , (Flushing cistern P.V.C. 10 its capacity (low level)(white) ( with fittings , Accessories and flush pipe)

G. I. Limpet washer

Galvanised steel bolts and nuts , (6mm dia and 25 mm long round head with slots )

Galvanised steel corrugated sheets

Galvanised steel J or L hooks (8mm dia )

GALVANISED STEEL PLAIN SHEETS

GI PIPES (25 MM DIA.)

Hollock ballies , (125 mm diameter)

Inter locking C. C. Paver block , ( 60mm Thick, M-30)

INTER LOCKING C.C PAVER BLOCK, ( 80 mm thick, M-30)

kail wood in planks , (Second class)

kail wood in scantling (Second class)

M. S butt hinges ( powder coated M.S butt hinges 100mm*58mm*1.9mm)

Mild steel plates

mild steel round bar 12mm dia and below

Mild steel round bar above 12mm dia

Mild steel screws 20mm (Bright finished or black enameled mild steel screws 20 mm)

Mild steel screws 40mm (Bright finished or black enameled mild steel screws 40mm )

Plastic emulsion paint

Prop 2 m (2-3.5m)

PTMT bib cock (15mm)

PVC bend ( 110 mm dia )

PVC door shutter (35 mm thick Factory made solid panel PVC door shutter of single piece extruded profile non decorative finished ( matt finished) )

PVC pipe (pvc pipe 50mm outer dia.6kgf/cm2)

PVC pipe ( 110 mm outer dia. 4kgf/cm2)

PVC Pipe (25 mm outer dia . 10kgf/cm2)

PVC vent cowl (63mm dia)

R. C. C COLLARS (NP2 CLASS 150MM DIA)

R. C. C PIPES (NP2 CLASS 150MM DIA )

Roofing paint ( Roofing paint for iron sheets in red color )

SAFEDA BALLIES ( 125 MM DIA)

SINGLE CLIP

soilid blocks ( 30*20*20 cm)

Solid blocks ( 30*20*15 )

STAINLESS STEEL HOLLOW SECTION ROUND / SQUARETUBES (GRADE 304, )

STAINLESS STEEL BOLTS/ SQUARE BAR AND PLATES

Stainless steel Kitchen sink (Without drain board 470*420mm bowl depth 178 mm)

Synthetic enamel paint in black or chocolate shade

Through and bond stone (size 24*24*39 cm)

vetrified floor tile ( 50*50 cm )

vitreous china , orrissa type w.c pan size 580mm

wash basin (Vitreous china flat back wash basin 630*450mm)

Water thinnable cement primer (Water thinnable cement primer for interior wall surface having VOC content less than 50gms/litre )

welding by electric plant

pvc pipe 75mm outer dia 4kgf/cm2

pvc 45 degree elbow 75mm dia

pvc bend 75mm dia

pvc tee 75*75*75 mm dia

pvc vent cowl 75mm dia

pvc end cap 75mm dia

63mm nails for fixing the clamp

material 75mm MTA

solvent

GI trafford profile sheets 0.35mm thick

Please Enable Macros to View BoQ information