Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC POST MISAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹41.2 L+₹6.6 L (19.1%)Rejected-Finance MISSAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L2 | Rejected-Finance NOT BEING LOWEST BID | |
| 3 | L3₹43.4 L+₹8.8 L (25.5%)Rejected-Finance GORUBANDHA MISSAMARI 784 506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance NOT BEING LOWEST BID | |
| 4 | L4₹43.9 L+₹9.3 L (26.8%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance NOT BEING LOWEST BID | |
| 5 | L5₹44.5 L+₹9.9 L (28.8%)Rejected-Finance LAKHPURA BUTCHERY MISSAMARI DIST SONITPUR ASSAM PIN 784506 | MISSAMARI | SONITPUR | ASSAM | 784506 | L5 | Rejected-Finance NOT BEING LOWEST BID |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
PROVN OF CERTAIN SANCTIONED WORKS AT MISSAMARI UNDER GE MISAMARI
2022_MES_555647_1
8308
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹98,000
Yes
16 May 2023
3 Oct 2022
27 Oct 2022
3 Oct 2022
25 Oct 2022
17 Oct 2022
60 days
Amount
Surface dressing not exceeding 15cm deep in soft/loose soil ,complete all as specified as directed.
Excavation in trenches not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes, cable trench, etc, not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil complete all as specified and directed.
M&L Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.
M&L brick work with sub class'B' bricks, straight or curved on plan exc 6m radius in half brick wall built in CM 1:4 complete all as directed.
M&L for sand filling under floors/trenches for cable protection, spreading, levelling, warering and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.
M&L for Hardcore of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a true Surface, complete all as specified and as directed.
M&L for rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick or concrete Surfaces , plastered surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
M&L Pre-cast Reinforced Cement Concrete (1:2:4) type B1 ( using 20mm graded aggregate) providing, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), cover slabs ( for manhole and drains) string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles, glossy finished of size 450x350x7mm thick as in vertical surfaces such as skirting/dados and riser of stems, over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and as directed.
M&L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in CM 1:6 as in floors, complete all as specified and as directed.
S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc, complete all as specified and as directed.
S&F powder coated aluminium anodised door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc of any colour, complete all as specified and as directed.
S&F for anodised Aluminium sliding window and ventiletor frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up 38 mm / 20 mm/1.5 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc, complete all as specified and as directed.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.
S&F Flat iron of size 40X6 as in wind ties conforming to Fe-290 Gde E-165,complete all as specified and as directed.
M&L for MS Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E-250) quality-B , complete all as specified and as directed.
S&F mild 12 mm steel screw bolts with hexagonal or square heads at one end and screwed the other and screwed end to be fitted with washers, one nut, not exc 45cm long and dia of neck exc 12mm & n.exc 20mm, omplete all as specified and as directed.
S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling with 4mm thick GI suspender, complete all as specified and as directed.
M&L for 4mm thick Non Asbestos designed fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium framework with screw in ceiling flat or sloping, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed
M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.
Demolition of cement concrete in roofs, floors(other than ground floors), staircase, landing and similar suspended work, complete all as specified and as directed.
M&L for brushing neat cement slurry with 03 Kg of cement per Sqm, complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, complete all as specified and as directed. Note : water proofing compound shall be measured and paid seperately under relevant item.
Supply only Integral water proofing compound
M&L 25 mm thick cement concrete (1:2:4) Type B0 (using 12.5 mm graded stone aggregate), complete all as specified and as directed
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium paint at 100 gm per sqm, complete all as specified and as directed.
M&L for cement concrete tiles 30x30x20 mm thick machine pressed tiles set jointed and pointed in with grey cement and pigments and flush pointed and polished over and including 20 mm thick screed bed in cement morter 1:3, complete all as specified and as directed
Disconnecting exc 250 Ltrs but not exc 500 Ltrs existing water tanks, setting aside (or lowering ) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in same position, complete all as specified and directed
M&L for providing cement concrete of min 75 mm thick of M20 grade (using 12.5mm graded stone aggregate) to be admixed with water resisting and crystalline water proofing admixture Sika® Control- 200 P (IN) @0.8% to 2% by weight of cement mixing at site and placed in position finished even and smooth with proper slope on horizontal surfaces, incl demolition of old PCC, complete all as specified and as directed. Note : water proofing compound shall be measured and paid seperately under relevant item.
Supply only water proofing compound Sika® Control- 200 P (IN)
Supply and apply a protection plaster 15 mm thick in CM 1 : 4 admixed with Sika® Plastocrete Plus @100ml per 50kg bag cement, on vertical wall/surface, including taking down old plaster surface. Product requirements admixture: conforms to IS 2645, complete all as specified and as directed. Note : water proofing compound shall be measured and paid seperately under relevant item.
Supply only water proofing compound Sika® Plastocrete Plus
M&L for preparing new plastered surfaces of walls and applying two coats of Cement Base paint over a coat of primer, complete all as specified and as directed.
M&L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light point controlled by one, one way switch 5 Amps , complete all as specified and as directed.
All as per item No 47 but, One ceiling fan / exhaust fan point controlled by one , one way switch and regulator, complete all as specified and as directed.
All as per item No 47 but, One 3 point 5 Amps socket outlets point controlled by one switch on the same board, complete all as specified and as directed.
All as per item No 47 but, One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed.
S&F Modular Switch (White) single pole, one way 6 amps, 230 volts, 1 module, complete all as specified and directed.
S&F Socket, (White) 6A - 2/3 pin combined 2 module, 230 volts, complete all as specified and directed.
S&F Modular Base plate (White) 3 Module, complete all as specified and directed.
S&F Modular Base plate (White) 8 Module, complete all as specified and directed.
S&F PVC Modular Box 3 Module, complete all as specified and directed.
S&F PVC Modular Box 8 Module, complete all as specified and directed.
S&F PVC Modular Fan Step Regulator 2 Module, complete all as specified and directed.
S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and directed.
S&F Recess mounted Environmental friendly ,asthetically designed ,high performance, round shape back lit downlighter 18W in ABS housing PC Opal diffuser with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver, complete all as specified and directed. Make : Model No. GLOW (GLOWDLR18WLED830S of Havells or equivalent in CROMPTON/Surya.
S&F sheet metal enclosure MCB DB SPN 8 way IP 54 Protection also with cement spill protector 200 Amps rated bus bar 240 volts double door with magnitic locking system,complete all as specified and directed. Make : Model No. 811825 of Indo Asian or equivalent in Legrand/L&T.
S&F MCB Double Pole 25 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.
S&F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.
Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.
Supply & Laying LT heavy duty UG Cable of size 16 Sqmm 2 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.
S& GI Tubing, light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc, complete all as specified and directed.
S&F wall Fan AC 230 Volts single phase 400 mm sweep complete with all accessories, complete all as specified and directed. Make : Model No. HIFLO NEO of Crompton or equivqlent in Bajaj/Usha
Supply and fixing Energy efficient ceiling fans AC 230 Volts single phase 1200 mm sweep copper wound complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed.
Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 Mtr below) the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. Note : GI Pipe laid will be measured and paid separately under relevant item.
M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I.
M&L Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm thick burried directly in ground to a depth not less than 1.50 mtrs below normal ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to copper strip 20 x 3 mm thick drawn through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I.
Supply and laying GI Tubing, light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc, complete all as specified and directed.
S&F Al strip of size 25x3.15mm burid in ground/fix with saddle and screws etc, for roof and on wall as earth continuty conductor, complete all as specified and directed.
Supply and Fix Air Termination, single ponted copper rod 12mm dia and 300 mm long complete fixes with brazing, complete all as specified and directed.
S&F test point terminal block made of gun metal or Phoshorus bronze size 75x75x25mm , diilled and screwed including 3 Nos 8 mm dia 25mm long hex head screw, complete all as specified and directed.
S&F PVC insulator fixed on wall or ceiling, complete all as specified and directed.
MAA CONSTRUCTION
Sunrise Enterprise
Saraswati Auto Works
Satya Enterprises
M/S Mahabir Traders
shree kamakhya traders
BEE KAAY TRADERS
Markson
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .