REPAIR/REPLACEMENT OF ALLUMINIUM WIRING WITH COPPER WIRING IN CERTAIN OMQ AND OTM ACCOMMODATION AT AF STATION TEZPUR UNDER GE (AF) TEZPUR

Amount

Taking down carefully copper/ aluminium point wiring (light/fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.

Taking down carefully sub main wiring of any type and size including fittings and fixtures, removing materials from site complete all as directed.

Disconnecting from electric circuit and taking out existing unserviceable SFUS, MCB DB SPN/ TPN or change over switches etc any number of ways including MCB etc removing materials from site and making good disturbed surfaces of floors/ walls/ ceiling etc complete all as directed.

Materials and labour point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core, drawn through existing PVC/ steel concealled conduit not less than 20mm size complete with all fittings and accessories, fixed to walls/ ceiling, including sunk cast type pressed steel terminal boxes 1.25mm thick with 2.2 mm plastic laminated sheet (Hylem) top cover for mounting switches/ regulator etc including 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one light point/ one fan point/Call Bell Point controlled by one one way switch complete all as specified and as directed.

All as per serial item No. 4 here-in-before but wiring with 1.5 Sqmm copper cable drawn through existing PVC/ steel concealled conduit for two way switches.

All as per serial item No. 4 here-in-before but for one 3 pin 5 amps switch socket out let on independent board.

All as per serial item No. 4 here-in-before but for one 3 pin 5 amps switch socket out let on same board.

All as per serial item No.4 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board.

All as per serial item No. 4 here-in-before but wiring with 1.5 Sqmm copper cable drawn through casing caping.

All as per serial item No.4 here-in-before but wiring with 1.5 Sqmm copper cable drawn through casing caping for two way switches.

All as per serial item No. 4 here-in-before but wiring with 1.5 Sqmm copper cable drawn through casing caping for one 3 pin 5 amps switch socket combination on independent board.

All as per serial item No. 4 here-in-before but for one 3 pin 5 amps switch socket out let on same board.

All as per serial item No. 4 here-in-before but wiring with 2.5 Sqmm copper cable including 2.5 Sqmm earth continuity conductor connected to common earth dolly drawn through casing caping for one 3/5 pin 15 amps switch socket combination on independent board.

Supply and fix switch piano, flush button single pole one way 5 Amp complete all as specified and as directed.

Supply and fix switch piano, flush button single pole two way 5 Amp complete all as specified and as directed.

Supply and fix bell push, flush type 5 Amp complete all as specified and as directed.

Supply and fix socket out let 3 pin 5 Amps, flush type complete all as specified and as directed

Supply and fix switch socket combination 2 in 1, 3 pin 5 Amp flush type universal complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and as directed.

Material and labour ceiling rose, surface bakelite, 65mm x50mm three terminals complete all as specified and as directed.

Supply and fix fan regulator electronic type rotary step, 120/280 volts complete all as specified and as directed.Make: Anchor/Havells/Legrand

Supply and fix call bell multi music type complete all as specified and as directed.

Refixing of switch piano/modular switch (Obtained from item No.01) flush button single pole one way 5 Amp with complete electrical connection complete all as specified and as directed.

Refixing of switch piano/modular switch (Obtained from item No.01) flush button single pole two way 5 Amp with complete electrical connection complete all as specified and as directed.

Refixing of switch socket combination 2 in 1, 3 pin 5 Amp (Obtained from item No.01) flush type (normal/modular) with complete electrical connection complete all as specified and as directed.

Refixing of socket out let 3 pin 5 Amps (Obtained from item No.01) flush type (normal/modular) with complete electrical connection complete all as specified and as directed.

Refixing of switch socket combination 2 in 1, 3 pin 5 and 15 Amp (Obtained from item No.01) flush type (normal/modular) with complete electrical connection complete all as specified and as directed.

Refixing of bell push, flush type 5 Amp (Obtained from item No.01) (normal/modular) with complete electrical connection complete all as specified and as directed.

Refixing of fan regulator electronic type rotary step (Obtained from item No.01)(normal/modular) with complete electrical connection complete all as specified and as directed.

Refixing of ceiling rose (Obtained from item No.01) surface bakelite, 65mm x50mm three terminals with complete electrical connection complete all as specified and as directed.

Refixing of call bell multi music type (Obtained from item No.01) with complete electrical connection complete all as specified and as directed.

Refixing of existing holder of any type (Obtained from item No.01) with complete electrical connection complete all as specified and as directed.

Refixing of existing light fittings of any type at site (Obtained from item No.01) with complete electrical connection complete all as specified and as directed.

Supply and fix nero surface mounted downlight round/Square LED panel aluminium die cast housing 12 watt LED 6500K complete all as specified as directed.

Supply and fix Decorative wall light fixture made up of Polycarbonate, suitable for 15 W retrofit LED lamp (Spiral B-22 base), including connecting up with twin core twisted flexible copper cable of suitable size complete all as specified and as directed.

Supply & fix 10 W surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed.

S&F sheet metal enclosures MCB DB 4 way SPN, double door, with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed.

S&F sheet metal enclosures MCB DB 8 way SPN, double door, with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed.

S&F sheet metal enclosures MCB DB 4 way TPN, Vertical type , double door, IP54 Protection with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed.

Supply and fix Miniature circuit breaker (MCBs) Single Pole, 240 Volts, 10KA, 6 to 32 Amps, 'C' curve complete all as specified and directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix MCB SPN 6 to 32 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix MCB SPN 40 to 63Amps 10KA ‘C’ series 240 volts complete all as specified and as directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix Miniature circuit breaker (MCBs) Triple Pole and Neutral, 415 Volts, 63A, breaking capacity 'C' curve complete all as specified and directed. Note:- old existing MCBs of any size should be deposit at E/M store

Material and labour sub main wiring with twosingle core PVC insulated unsheathed cable 10.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including PVC casing & capping of size not less than 25mm with accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 10.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & capping shall be measured as one unit.

Material and labour sub main wiring with twosingle core PVC insulated unsheathed cable 6.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including PVC casing & capping of size not less than 25mm with accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 6.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & capping shall be measured as one unit.

Material and labour two single core PVC insulated unsheathed cable 6.0 sqmm (Nominal aera) two run with multistranded copper conductor cable, 1100 volts grade, drawn through existing PVC concealled conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 6.00 sqmm (Nominal area) with ultistranded copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Material and labour two single core PVC insulated unsheathed cable 4.0 sqmm (Nominal aera) two run with multistranded copper conductor cable, 1100 volts grade, drawn through existing PVC concealled conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 4.00 sqmm (Nominal area) with ultistranded copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Material and labour sub main wiring with twosingle core PVC insulated unsheathed cable 4.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including PVC casing & capping of size not less than 25mm with accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 4.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & capping shall be measured as one unit.

Material and Labour pvc insulated and pvc sheathed cable with copper conductor, 1100 volts grade, cross-sectional area 10 sq. mm and 4 core and making good disturbed surfaces complete all as specified and as directed

Supply and fix in repair sheet metal enclosure SPN with two pin earth plug and socket complete with one single pole MCB 20 Amps, 10KA, 240 Volts incl removing the existing unserviceable metal plug socket complete all as directed.

Supply and fix as in repair switch piano, flush button single pole one way 5 Amp complete all as specified and as directed.

Supply and fix as in repair switch piano, flush button single pole two way 5 Amp complete all as specified and as directed.

Supply and fix as in repair bell push, flush type 5 Amp complete all as specified and as directed.

Supply and fix as in repair socket out let 3 pin 5 Amps, flush type complete all as specified and as directed

Supply and fix as in repair switch socket combination 2 in 1, 3 pin 5 Amp flush type universal complete all as specified and as directed.

Supply and fix as in repair switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and as directed.

Supply and fix as in repair ceiling rose, surface bakelite, 65mm x50mm three terminals complete all as specified and as directed.

Supply and fix as in repair fan regulator electronic type rotary step, 120/280 volts complete all as specified and as directed.

Supply and fix as in repair call bell multi music type complete all as specified and as directed.

Supply and fix as in repair Miniature circuit breaker (MCBs) Single Pole, 240 Volts, 10KA, 6 to 32 Amps, 'C' curve complete all as specified and directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix as in repair MCB SPN 6 to 32 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix as in reapir MCB SPN 40 to 63Amps 10KA ‘C’ series 240 volts complete all as specified and as directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply and fix as in repair Miniature circuit breaker (MCBs) Triple Pole and Neutral, 415 Volts, 63A, breaking capacity 'C' curve complete all as specified and directed. Note:- old existing MCBs of any size should be deposit at E/M store

Supply, installation, testing & commissioning as in replacement of 1 phase, 2 wire, single source, direct connected prepaid key pad based BIS Marked IS-15884 Digital Energy Meter, 10-60 Amps, 240 Volts, accuracy class-1.0 alongwith parallel Consumer Interface Unit and Soft Token Transfer Device at houses, with inbuilt control switch, containing provision for TOD & RTC, capable to define tariff slabs, happy hour & holiday definition with facility of meter to generate ABC Code ( Authenticated Billing Code) for Monthly Energy usage Bill Generation,having LCD type display, calliberation LED, numeric key pad for token entry with RS 232 communication port, LED for credit status indication, push button for scroll and having features for load disconnection in case the credit limit become zero or increase of load than permissible limit, reconnection and disconnection of load, buzzer at Consumer Interface Unit to give alarm in case of low credit and overloading and data download port for last 25 days (min) temper event and load survey for last 45 days with all standard anti temper features including sealing facility all as specified and directed by Engr-in charge. Make: HPL and cat part No PSPB1523111000OC01 or L&T and Cat No.WR300BC7ASPREPAIDB or equivalent in Secure. Note:- Cost of connecting to existing system and and others connected item including 3 pair, 0.5 mm Annealed Cu connecting wire to connection between meter and consumer interface unit, termination connector for 3 pair wire meter and CIU each set and cost of disconnetion of old existing meters of any size and deposit at E/M store is included in the quoted rate is deemed to be included in the rates quoted. 2. Cost of Installation commissioning and implementation of vending system through server including required software, data base defining, mapping of consumers & running the vending system for each meter for lifetime validity and training users along with user manual for one year is included in the quoted rate is deemed to be included in the rates quoted.

Transaction charges one time for one year

M & L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in gournd (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized 4 mm dia earth wire as earthing lead upto 7.5 mtrs from testing point fixed by means of steel bolts, nuts, check nuts and washer, of galvanized earth wire protected by 25mm bore medium grade galvanised iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore light grade galvanised iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (Compacted thickness) all around earth electrode with concrete earth pit in PCC (1:3:6) type C-1 50mm thick precast RCC M-20 nominal mix cover slab of size 450mm x 450mm reinforced with 8mm dia TMT bar 10 cm C/C and suitable handle of 10mm dia round bar including necessary execavation, earth work in soft / loose soil and deposited soil to a distance n.exc 50 M and necessary testing complete all as shown in electrical plate No. 3 of MES shedule of SSR Part-I complete all as specified and as directed.

Supply and fix GI wire dia 4 mm size complete all as specified and as directed.

Supply and fix as in repair 2mm thick laminated sheet of size 5"X7" fixed on switch board for fixing switches, sockets, regulator etc complete all as specified and as directed.

Supply and fix in repair 2mm thick laminated sheet of size 7"X9" fixed on switch board for fixing switches, sockets, regulator etc complete all as specified and as directed.

Supply and fix in repair 2mm thick laminated sheet of size 9"X11" fixed on switch board for fixing switches, sockets, regulator etc complete all as specified and as directed.

KAILSON

M/S Kangkans