Building

Name of Work :-New Construction of PHC Main Building with Pm room, Compound wall, and Electrification at Vankatimba , Ta- Bhiloda, Dist- Aravalli.

Memorandum showing items of works to be carried out

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Excavation for foundation upto 1.5 m depth

sorting out and stacking of useful materials and Rupees Two Hundred Twelve and

disposing off the excavated stuff upto 50 Meter

Paisa Fifty Two Only

Loose or soft soil

Excavation for foundation for depth from 1.5 m

including sorting out and stacking of useful Rupees Two Hundred Ninety Five and

materials and disposing off the excavated

stuff upto 50 Meter

lead.(B) Dense or Hard soi

Excavation for foundation for depth from 1.5 m to

Rupees One Thousand Forty Eight and

3 04B002E 155.00 m including sorting out and stacking of useful Cmt

Paisa Seventy Nine Only

materials and disposing off the excavated stuff

upto 50 Meter lead.(E) Hard Rock

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

Rupees One Hundred Thirty Six and

Paisa Ninety One Only

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Filling in plinth with sand under floors including

Rupees Four Hundred Eighty One and

5 4007A 102.00 watering ramming, consolidating and dressing Cmt

Paisa Eighty Only

Filling in foundation and plinth with murrum or

selected Rupees Two Hundred Ninety Four and

soil in layers of 20cm. thickness including watering,

Paisa Thirty Eight Only

ramming and consolidating etc. complete.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and laying cement concrete 1:2:4 (1-

Cement : Rupees Three Thousand Seven

7 05010AA 132.00 2- Coarse sand : 4- graded stone aggregates 20 mm Cmt 3757.61 Hundred Fifty Seven and Paisa Sixty

nominal size) and curing complete excluding cost of One Only

formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:4:8 (1-

4- coarse sand : 8- hand broken stone aggregates 40 Rupees Two Thousand Seven Hundred

Sixty Nine and Paisa Sixty Nine Only

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing TMT Bar FE 500D reinforcement for

Rupees Seventy Seven and Paisa

9 05014C 45454.00 work including bending, binding and placing in Kg

Twenty Eight Only

complete upto floor two level

Providing throating or plaster drip and moulding to Rupees Forty Three and Paisa Seven

R.C.C. Chhajja.

Providing & laying controlled cement concrete M-

250 work with curing etc. complete including the

Rupees Four Thousand Eight Hundred

11 R.A 146.00 cost of form work but excluding the cost of Cmt

Sixty Seven and Paisa Nineteen Only

reinforcement for R.C.C. work at (a) M-250 for

footing,pedestal,columns up to plinth & plinth beam

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Six Thousand One Hundred

form work but excluding the cost of reinforcement

Fifty Two and Paisa Ninety Two Only

for R.C.C. work for coping

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & laying controlled cement concrete M-

Rupees Seven Thousand Nine

200 with curing etc. complete including the cost of

form work but excluding the cost of reinforcement

Cmt 7966.88 Hundred Sixty Six and Paisa Eighty

for R.C.C. work for Colums for Ground Floor

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Eight Thousand Ninety Two

form work but excluding the cost of reinforcement

and Paisa Twelve Only

for R.C.C. work for Colums for First Floor

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Six Thousand Nine Hundred

form work but excluding the cost of reinforcement

Ninety Nine and Paisa Thirty Only

for R.C.C. work for Stair for all Floor

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of

Rupees Six Thousand Five Hundred

16 R.A 59.00 form work but excluding the cost of reinforcement Cmt

Four and Paisa Forty Only

for R.C.C. work at Ground Floor for (i) Beam,

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of

Rupees Eight Thousand Two Hundred

17 R.A 67.00 form work but excluding the cost of reinforcement Cmt

Ninety Four and Paisa Twelve Only

for R.C.C. work at Ground Floor for (i) Slab,

Shelves. For ground floor

Providing & laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Eight Thousand Three

18 R.A 3.00 form work but excluding the cost of reinforcement Cmt 8335.53 Hundred Thirty Five and Paisa Fifty

for R.C.C. work at Ground Floor for (i) Slab, Three Only

Shelves. For first floor

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Brick work using common burnt clay building

having crushing strength not less than

Rupees Four Thousand Two Hundred

19 06002BA 262.00 kg./Sq.Cm. in Cmt

Fourteen and Paisa Thirty Two Only

foundation and plinth in Cement Mortar 1:6 (1-

: 6 -fine sand)(B) Conventional

Brick work using common burnt clay conventional

building bricks for super structure having crushing

Rupees Four Thousand Four Hundred

06002BA+06006 strength not less than 35 Kg./Sq.Cm. in cement

mortar 1:6 (1 cement : 6 fine sand) in super

Cmt 4495.98 Ninety Five and Paisa Ninety Eight

structure above plinth level upto floor two level

(conventional ) (A) Ground Floor

Brick work using common burnt clay conventional

06002BA+06006 building bricks for super structure having crushing

B strength not less than 35 Kg./Sq.Cm. in cement Rupees Four Thousand Five Hundred

mortar 1:6 (1 cement : 6 fine sand) in super

Thirty Eight and Paisa Ten Only

structure above plinth level (conventional ) (A)

Half brick masonary in common burnt clay

conventional building bricks having crushing

06008A2A+0601 strength not less than 35 Kg./Sq.Cm. in cement Rupees Six Hundred Eighty Four and

mortar 1:4 (1 Cement : 4 coarse sand) in super

Paisa Nineteen Only

structure above plinth level upto floor two level

(conventional ) (A) Ground Floor

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing in position Alluminium single

shutter door with 50 micron colored allu.anodized

hollow section frame with 6mm laminated

Compacted sheet at Bottom and Glass sheet of

5mm thick at top of approved shade fabricated

from Allu.Standered sections for outer frame size

101mmx44.5mm (of app.wt 12kg / rmt ) and door

Rupees Three Thousand Three

style and top rail size 47.5mm x 44.5mm (of wt

kg/rmt) Bottom and lock rail for door

Smt 3399.66 Hundred Ninety Nine and Paisa Sixty

114mmx44.5mm (of app. wt )and glazing chips

around the laminated Compacted sheet including

providing havy handle,havy lock,bracket,stoppers

6mm thick both side laminated Compected Sheet of

app. make 12mm thick clits including all req.

material laboure and equipment as per detail

drawing as directed for door

Providing and fixing in position Alluminium

double shutter door with 50 micron colored

allu.anodized hollow section frame of approved

shade fabricated from Allu.Standered sections for

outer frame size 101mmx44.5mm (of app.wt 12kg /

rmt ) and door style and top rail size 47.5mm x

44.5mm (of wt 1.05 kg/rmt) Bottom and lock rail Rupees Four Thousand Eighty One

for door 114mmx44.5mm (of app. wt )and glazing

and Paisa Forty One Only

chips around the sheet paneled allover including

providing havy handle,havy lock,bracket,stoppers

6mm thick both side laminated compacted sheet of

app. make 12mm thick clits including all req.

material laboure and equipment as per detail

drawing as directed for door

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal

Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt.

Kg/mt) with sliding shutters of horizontal member Rupees Two Thousand Fifty Nine and

size 40 mmx18mm x1.29mm (of Jindal Section

Paisa Thirty Nine Only

no:8947@ wt.of 0.456 Kg/mt), vertical member of

size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with

Anodized aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame

and mosquitonet Shutter shall be fixed as

instructed by engineer in-charge.

Providing and fixing standared extruded of

section of size 63mm x 38.10mm x 1.2mm @ Wt.

0.643 Rupees One Thousand One Hundred

Kg/mt with colour anodized alluminium frame for

Seventy Five and Paisa Fifty Five Only

ventilation with 5 mm thick frosted glass as details

complete for Ventilation

Providing and fixing M.S. grills of required pattern

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or Rupees One Hundred Six and Paisa

Twenty Nine Only

bars with round headed bolts and nuts or by

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing in position Alluminium single

shutter door with 50 micron colour allu.anodized

hollow section frame of approved shade fabricated

from Allu.Standered sections for outer frame size

101mmx44.5mm (of app.wt 12kg / rmt ) and door

style and top rail size 47.5mm x 44.5mm (of wt

Rupees Three Thousand Seven

kg/rmt) Bottom and lock rail for door

114mmx44.5mm (of app. wt )and glazing chips

Smt 3764.27 Hundred Sixty Four and Paisa Twenty

around the sheet paneled all over including

providing havy handle,havy lock,bracket,stoppers

6mm thick both side laminated compacted sheet of

app. make 12mm thick clits including all req.

material laboure and equipment as per detail

drawing as directed for door ( For Toilet)

Providing and fixing 19mm thick water proof

plywood shutters with 1 mm thick approved

Formica / prelaminated sheet on both side for

cupboard cabinet on shutter with Teak wood

Rupees Three Thousand Ninety Five

29 R.A 21.00 frame of size 50 mm x 50 mm including necessary Smt

and Paisa Sixty Five Only

S.S fixtures and fastening etc also providing a coat

of primer and two coat of oil paint on teak wood

frame & batten patti as directed by Engineer-in-

Providing andfixing in Position Cattle trap

Fabricating with 50 mm G.I. pipe(class C) , M.S.

angle, patti etc. comp. as per design supplied by

depertment.(12 No.of G.I Pipe with 100x50x5 mm

Rupees Seven Thousand Six Hundred

30 R.A 5.00 Channel 2 Horizontal Support and 5 Vertical Rmt

Thirty and Paisa Fifty Five Only

Support with 1.5m length,Weight of channal is9.20

kg/rmt including Labour charges for cutting

welding, fabricating, carting & fixing in position

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and laying polished Kota stone slab

over 20mm (Average) thick base of cement mortar

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - Rupees One Thousand Eighteen and

coarse sand) laid over and jointed with grey cement

Paisa Ninety Nine Only

slurry mixed with pigment to match the shade of

including rubbing and polishing etc. complete. (A)

Providing and laying white glazed tiles 6mm thick

Rupees Nine Hundred Fifty and Paisa

32 14008AA 29.00 flooring treads of steps and landing laid on a bed of Smt

Fifty Three Only

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick

skrting risers of steps and dedo on 10mm thick

Rupees Nine Hundred Eighty Two and

33 14009AA 575.00 cement Smt

Paisa Three Only

plaster 1:3 (1-cement : 3-coarse sand) and jointed

white cement slurry

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars

10mm thick cement mortar 1:3 (1-Cement :

coarse Rupees One Thousand One Hundred

sand) and jointed with gray cement slury mixed

Sixty Six and Paisa Ninety Three Only

pigment to match the shade of slab including

and polishing etc. complete

Providing and laying marble stone ( Keshariyaji

Green / any Colour ) slab flooring / Staircase

Trade & Riser , Window sill, door threshold, door

sill , Jams etc over 20 mm. (average) base of cement Rupees One Thousand Three Hundred

mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5

Ninety Three and Paisa Eighty Only

and jointed with grey cement slurry matchj with

stone using ingradiant colour including

rubbing,edge Rounding and polishing complete.

Providing, fixing and construction of sandwitch

type 25mm thick double polished Granite of

uniform size and colour for

Kitchen/Pantry/Counter/Laboratory sink, shelves

etc in floor, dado or fascia up to 1.8mt long

including necessary cement mortar bedding in

cement mortar 1:2 of required thickness. Kota Rupees Five Thousand Four Hundred

shall be fixed over 25mm thick rough kota stone

Forty Six and Paisa Ninety Three Only

bottom, cement joints and pointing as specified

with necessary making of edges,Including vertical

kota support as per design, polishing, curing daily

moping with water, kerosene as directed for at

least 15 days or up to the satisfaction of Engineer-

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing 25 mm thick pre polished on

both faces kota stone slab front edge machine cut

polished in shelves below platform, in store or in

cupboards at all floors and levels jointed with gray Rupees Eight Hundred Eighty Six and

cement slurry including making chases in wall and

Paisa Seventy Eight Only

making good by filling with cement mortar 1:3(1

Cement : 3 sand) completed as directed by the

Engineer in charge.

Providing and laying cement concrete flooring

14015BA cement : 2-coarse sand : 4-graded stone aggregate Rupees Three Hundred Fifty Two and

20mm nominal size) laid in one layer and finished

Zero Paisa Only

floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water Rupees One Thousand One Hundred

and oxalic acid etc. as directed. Including

Four and Paisa Ninety Four Only

Average 75mm thick cement concrete 1:2:4 (1-

Cement : 2 coarse sand 4 stone aggregate 10 mm

nominal size) with finishing floting coat of neat

cement complet. including water proofing chemical

as per manufacturer recommendation with

years guarantee of water proofing.

Providing 10 mm thick Mala cement plaster on

17001 A+17004 ceiling and soffits of stairs upto floor two level in Rupees Two Hundred Fourteen and

cement mortar (1:3) (1 cement : 3 sand) & finished

Paisa Eighty Nine Only

even and smooth : (A) Ground Floor

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing 15 mm thick Mala cement plaster in

single coat on fair side of brick / concrete wall for

Rupees Two Hundred Fifteen and

41 17002 B+17004 1339.00 interior plastering upto floor two level & finished Smt

Paisa Eighty Four Only

even and smooth : (ii) C M 1:4 ( 1 cement 4 sand)

(A) Ground Floor

20mm thick sand faced gutka finish cement plaster

on walls uptoheight 10 metres above ground level

Rupees Three Hundred Twenty One

42 17009.00 1152.00 consisting of 12mm thick backing coat of C.M. 1:3 Smt

and Paisa Nine Only

(1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1- sand) etc. complete.

Providing cement vata (10cm. x 10 cm. size) quarter

Rupees Twenty Four and Paisa

43 17015.00 179.00 round in cement mortar 1:1 including neat cement Rmt

Twenty Eight Only

finishing, watering etc. complete.

Applying two coats of putty & two coats of primer

approved brand and manufacture on new wall

Rupees Forty and Paisa Fifty Nine

44 19032.00 1394.00 give an even shade including thoroughly brushing Smt

surface free from mortar dropping and other

matter and sand papered smooth.

Distempeing (Two coats) with oil bound washable

distemper of approved brand and manufacture and

of required shade on wall surfaces to give an even

shade, over and including a priming coat with Rupees Seventy Five and Paisa Forty

alkali resistance primer of approved brand after

thoroughly brushing the surface and other foreign

matter and also including preparing the surface

even and sand parpered smooth.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the Rupees Seventy Three and Paisa

Seventy Five Only

to remove all dirt, and remains of loose powdered

materials.etc complete

Painting two coats (excluding priming coat) on new

and other metal surface with enamel paint,

brushing, Rupees Ninety Two and Paisa

interior to give an even shade including cleaning the

surface an even shade including cleanicn the

all dirt, dust and other foreign matter.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

consistment with I.S.I specification. Using

Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Rupees Eighty Six and Paisa Eighty

Weight one percent is recommended i.e one litre

chemical emulsion with 19 liter give 1 %

inclusive of one litre chemical emulsion appication

rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing 25mm thick both side polish

kota stone Rain Water Spout in including fixing in Rupees One Thousand One Hundred

position front edge machine cut polishing etc.

Twenty Four and Paisa Thirteen Only

Providing laying and jointing in true line and level

dia. U.P.V.C. Pipe ( SCH- 40) for cold water

fittings as approved by Engineer In Charge. Pipe

fixed on the wall with the help of clamp at every

Rupees Seventy Two and Paisa Sixty

metre C/C or shall be concealed as directed

necessary fittings etc. including testing of pipe and

and fixing the same with adhesive solvent,

of all materials.

Providing laying and jointing in true line and level

dia. U.P.V.C. Pipe ( SCH- 40) for cold water

fittings as approved by Engineer In Charge. Pipe

fixed on the wall with the help of clamp at every

Rupees Ninety One and Paisa Eighty

metre C/C or shall be concealed as directed

necessary fittings etc. including testing of pipe and

and fixing the same with adhesive solvent,

of all materials.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and laying of PVC SWR pipes IS

13592 for Drain - 75 mmdia pipes with necessory

fittings, single socketed in any length with rubber

Rupees Three Hundred Twenty Eight

52 R.A 85.00 ring joints, laid in walls, trenches or in floors Rmt

and Paisa Twenty Five Only

necessary accessories and solvent cement etc.

complete 75mm Dia

Providing and laying of PVC SWR IS

for Drain - 110 mmdia pipes with necessory

fittings, single socketed in any length with rubber

Rupees Five Hundred Nineteen and

53 R.A 75.00 ring joints, laid in walls, trenches or in floors Rmt

Paisa Fourteen Only

necessary accessories and solvent cement etc.

complete 110mm Dia

Providing and fixing in position cowel went to Rupees Three Hundred Ninety Three

pipes.(B)75mm dia.

and Paisa Four Only

Providing and fixing in position cowel went to Rupees Five Hundred Five and Paisa

pipes.(C) 100mm dia

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of the

following Rupees Five Hundred Eighty Six and

nominal diameter of self cleansing design with C.I

Paisa Fifty Nine Only

scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing water closet Squatting pan

(Indian type W.C. pan) size 580 mm (earthwork,

bed concrete, foot rests and trap to be measured

and paid for separately) (A) Vitreous china - (i)

Long pattern-white colour with 100 mm size “P” or

Rupees One Thousand Four Hundred

23009+23011+23 “S” trap for water closet squatting pan including

jointing the trap with the pan and soil in cement

Nos 1434.80 Thirty Four and Paisa Seventy Nine

mortar 1 :1 (1 cement : 1fine sand) including in

cement mortar 1 : 3 (1 cement : 3 coarse sand) a

pair of white vitreous china 250 mm x 130 mm x

30mm foot rest for long pattern squatting pan

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing Wash basin with single hole

for pillar tape with C.I. or M.S. brackets painted

white including cutting holes and making good the

same but excluding fittings. (A) vitreous china : (ii)

Flat back washbasin 550 mm x 400 mm size (i) IN

white colour including Providing and fixing 32mm

Dia. C.P. Brass waste for washbasin or sink and

32mm Dia. M. I. Fisher union for washbasin or

sink with Providing and fixing pillar tap, capstan

23018+23020A+2 head, screw down high pressure with screws Rupees Two Thousand Two Hundred

58 3029A+23030A+ 8.00 shanks and back nuts.(A) 15 mm. dia.Including Nos 2233.79 Thirty Three and Paisa Seventy Eight

23021A+M602 Providing and fixing 15 mm Dia. screw down stop Only

tap and 32 mm dia Waste Pipe for Wash Basin C.P.

Providing and fixing kitchen sink with C.I. or M.S.

Brackets, painted white including cutting holes in

walls and making good the same but excluding

23019+23020B+2 fitting (C) Vitreous china sink (i) 600 mm x 450mm Rupees Two Thousand Five Hundred

x 150 mm size including Providing and fixing

Five and Paisa Thirteen Only

40mm Dia. C.P. Brass waste for washbasin or sink

and 40mm Dia. M. I. Fisher union for washbasin or

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing wash down water closet

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar

Cement : 1-fine sand) (Seal and cover to be

Rupees One Thousand Six Hundred

60 23010+23017 5.00 measured Nos

Forty Eight and Paisa Fourteen Only

and paid for separately)(A) vitreous China Pattern

white colour including Providing and fixing plastic

seat and cover for wash down water closer with

C.P. brass hinges and rubber buffers. (B) Black

plastic seal and cover.

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick

A.C. Rupees Eight Hundred Fifty Nine and

sheet or plywood sheet and fixing to wooden pluge

Paisa Forty Only

C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete

Rupees Six Hundred Sixteen and Paisa

62 23025.00 10.00 C.P. brass brackets fixed to wooden plugs with Nos

scews.(B) 600mm x 20mm size.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing laying and jointing in true line and level

dia. U.P.V.C. Pipe ( SCH- 40) for cold water

fittings as approved by Engineer In Charge. Pipe

fixed on the wall with the help of clamp at every

Rupees One Hundred Forty Eight and

Paisa Eleven Only

metre C/C or shall be concealed as directed

necessary fittings etc. including testing of pipe and

and fixing the same with adhesive solvent,

of all materials.

Providing and fixing screw down bib taps of

Rupees One Hundred Eighty Six and

64 23028 B1 21.00 size.(B) Brass chromium plated screws down Bib Nos

Paisa Eighty Two Only

Providing and fixing Gun metal check or non-

Rupees Four Hundred Twenty and

65 23031 C 2.00 return Nos

Paisa Sixty Three Only

fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-

Rupees Six Hundred Sixty Three and

66 23031 E 2.00 return Nos

Paisa Forty Two Only

fullway wheel valve.(E) 40mm dia.

Providing and fixing chromium plated brass half

Rupees Two Hundred Sixty Three and

67 23032 B 8.00 flush cock of approved quality including fixing in Nos

Paisa Seventy Seven Only

etc. complete.(ii) 25mm dia.

Providing and fixing brass cromium plated

Surgical handle cock ( Cabtree, Essco, Ess-Ess, Rupees Nine Hundred Twelve and

Plumber of approved quality) of size of 15 mm dia

Paisa Three Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing erecting and fixing double coated ISI

Rupees Three and Paisa Ninety Four

69 22014.00 4500.00 tank of required capacity each with all necessary Ltr

and connection etc. complete on terrace

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

Rupees One Thousand Two Hundred

70 24006B 15.00 C.I. cover with frame of 300mm x 300mm size Nos

Forty Six and Paisa Ninety One Only

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for

C.I. Inspection chamber and bends with bricks

crushing strength not less than 35Kg/Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

Rupees Three Thousand Six Hundred

71 24016BA 6.00 with 1:2:4 mix (1-cement :2- coarse sand :4-graded Nos

Sixty and Paisa Seventy Five Only

stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

with cement mortar 1:3 finished smooth with a

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm

450mm deep for pipe line with one or two inlets.

Extra over items 24.44 for every additional depth of

0.1M. of part thereof beyond 450mm depth for Rupees Two Hundred Sixty Four and

Paisa Eighty Six Only

masonry chamber.(ii) for 500mm x 700mm size.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and laying of PVC (SWR) pipes

with necessory fittings, single socketed in any

length with rubber ring joints, laid in walls, Rupees Nine Hundred Twenty Five

trenches or in floors necessary accessories and

and Paisa Sixteen Only

solvent cement etc. complete 160mm dia.

Constructing a soak pit of 2.50 m in out side

diametre & 6.00 m deep of excavation any type soil

with 0.23 m thick honey comb brick masonary wall

5.50 m from bottom & 0.50 m solid at top in cement

mortar 1:6 ( 1 cement: 6 Sand) based on 0.10 cm

Rupees Forty Thousand Eight

thick CC 1:4:8 (1 cement : 4 coarse sand : 8 hand

broken stone aggregate 40mm nominal size) and

Nos 40846.42 Hundred Forty Six and Paisa Forty

filling of brick bat at bottom of soak pit 0.60 m

thick & R.C.C. top slab 0.12 m thick in CC 1:2:4

including cost of form work & reinforcement as

per detail drawings or as directed by Engineer -in-

Providing and fixing 3 mm thick PVC sheets as

signange and display of health signs/information of

required size having retro reflective letters/design

as per requiement, fixing the same through Rupees Four Hundred and Paisa

approved adhesive etc. complete work shall e

Ninety Seven Only

carried out as per instruction of Engineer-in-

charge (Approved make PVC foamed sheet only)

Clearing and grubbing road land including

vegetation grass bushes,shrubs,sapling and trees

Rupees Eight and Paisa Forty Two

76 26117 A 3050.72 to 300 mm removal of stumps of trees cut earlier Smt

disposal of unserviceable materials(A) By manual

in area of light jungle

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & laying controlled cement concrete M-

200 with curing etc. complete incl. the cost of form

Rupees Eight Thousand Five Hundred

77 R.A 4.00 work but excluding the cost of reinforcement for Cmt

Thirty and Paisa Forty Six Only

R.C.C. work at Ground Floor (F) Vertical and

horizontal fins up to floor two level

Providing and fixing heavy duty C.I. Cover with Rupees One Thousand One Hundred

78 input no-M114

frame 500mm x 700mm

Forty and Paisa Ninety Five Only

Providing and fixing hexagonal chickenmesh of

required size with nails / cement at junction of

concrete and brick work or between different

materials, etc. including scaffolding at all floors / Rupees Two Hundred Twenty Two

all levels / all heights / all shapes etc. complete as

and Paisa Twenty Only

per specifications and direction of Engineer-in-

charge. For civil, plumbing, electrical &

infrastructure works.

Providing and laying 12" x 12" Ceramic 10mm

thick tile flooring of any colour and design over

20mm (average ) base of cement mortar 1:6 (

Rupees Eight Hundred Eight and Zero

80 R.A 36.00 cement : 6 coarse sand ) and jointed with colour Smt

cement slurry including finished with flush

pointing and cleaning the surface etc. compl For

ramp, Otta etc whereever applicable.

Providing and fixing pre-cast concrete kerb stone

cement based concrete block 30cm length,30cm

and 15cm thick of M200 grade concret as per

Rupees Four Hundred Four and Paisa

81 14023A 125.01 approved Rmt

design and including excavation for fixing in

and level,filling the joint with C:M 1:3

sand) etc complete.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and fixing pre-cast Rubber Dye / steel

inter locking concrete block 60mm thick with grade

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Rupees Seven Hundred Six and Paisa

Ninety Two Only

IS 15658 : 2006 including 35 mm Sand layer for

and filling the joint with sand in proper line and

per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing ball cock of approved. quality Rupees One Hundred Thirty Seven

as directed.(B) Abonite (ii) 50mm dia.

and Paisa Eighty Eight Only

Providing & laying controlled cement concrete M-

200 work with curing etc. complete including the Rupees Five Thousand Four Hundred

84 R.A 13.00 cost of form work but excluding the cost of Cmt 5447.94 Forty Seven and Paisa Ninety Four

reinforcement for R.C.C. work in Road work With Only

Trimix Matchine.

Providing & construction Tree plants required

Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with

goodearth with mixing of cow dong and Rupees One Hundred Thirty Six and

pesticide.planting the following plant of 4' to 6'

Paisa Thirty Five Only

height stack it well, maintain it for 3 month name

of plants Conocarpus, Neem Etc...

Painting with weatherproof exterior emulsion

acrylic based paint the pattern using the grid and

dimensions for door and window given as per the

defined shade code by experienced applicator of Rupees Three Hundred Eighty and

standard drawing and design according to the

Paisa Seventy Seven Only

reference manual of Facade Branding for Health &

Wellness Centres of Ayushman Bharat Scheme as

per the direction of the Engineer in Charge.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Painting the illustration circle of Diameter 44 inch

with weather proof exterior emulsion acrylic based

paint as per defined shade code by experienced

applicator of standard drawing and design Rupees Two Thousand One Hundred

according to the reference manual of Facade

Eighty One and Paisa Sixty Only

Branding for Health & Wellness Centres of

Ayushman Bharat Scheme as per the direction of

the Engineer in Charge.

Painting with weatherproof exterior emulsion

acrylic based paint the National Urban Health

Mission Logo and Ayushman Bharat Logo type

using the grid and dimension given as per defined

Rupees Seven Thousand Six Hundred

88 M.R 1.00 shade code by experienced applicator of standard Nos

Eighty Six and Paisa Ten Only

drawing and design according to the reference

manual of Facade Branding for Health & Wellness

Centres of Ayushman Bharat Scheme as per the

direction of the Engineer in Charge.

Providing Bore Well as par instructions of engineer Rupees One Lakh Fifty One Thousand

Five Hundred and Zero Paisa Only

Providing, fixing, testing and commissioning of

ABC Type 6 Kg Capacity Fire Extinguisher Monic

Phosphate powder 50, Stored Pressure Gauge, Rupees Two Thousand Four Hundred

Controllable discharge mechanism Class A Rating

Thirty Four and Paisa Ten Only

3A & Class B rating as per IS 15683 ISI Mark

(ABC Dry Chemical Powder- MAP 50%)

Providing, fixing, testing and commissioning of

CO2 Type Fire Extinguisher of capicity 4.5 Kg

filled with CO2 Gas as per IS 15222 with controll

Rupees Six Thousand Nine and Paisa

91 MR 5.00 discharge mechanism, fitted with Hose & Horn Nos

applicable on class B fire rating 21B confirms to IS

15683 bearing ISI Mark CO2 cylinder as per IS

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing, fixing, testing and commissioning of Rupees One Thousand Seven Hundred

Conventional Smoke detectors

Eighty Seven and Paisa Seventy Only

Providing, fixing, testing and commissioning of Rupees Two Thousand Three Hundred

Conventional Mannual call point

Twenty Three and Zero Paisa Only

Rupees Three Thousand Three

Providing, fixing, testing and commissioning of

Conventional Hooter cum strobe

Nos 3393.60 Hundred Ninety Three and Paisa Sixty

Rupees Fourteen Thousand Eight

Providing, fixing, testing and commissioning of

Conventional Fire Alarm Panel 2 Zone

Nos 14897.50 Hundred Ninety Seven and Paisa Fifty

Rupees One Hundred Thirty Six and

96 MR 300.00 2 core x 1.5 sqmm FRLS armoured cable. Rmt

Paisa Thirty Five Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying of round stool should have

of round stool. Overall dimension should be

Diagonal Leg Dia 538 mm H470 min-655max. Top

plate made of SS 304 made sheet with spin section

of thickness 1mm & non corrosive. It has a

diameter of 305mm, seat base made of MS ring

and rectangular tube. EN8 Screw having dia of

mm is used for height adjustment of the seat base.

The round hub made of MS ERW tube having dia

of 38mm and thickness 2 mm. The Hub is welded

with the legs and it accommodate and cover the

Rupees One Thousand Five Hundred

97 9 (BHAVNA) 4.00 lead screw mechanism. The under-structure Nos.

Fifty and Zero Paisa Only

consist of 4 legs made up of MS ERW tube of

diameter 25.4 mm and 1.6mm thick. The press

formed pipe leg give a round & clean look. All the

legs is Provided with 4 nos of Nylon-6 bush. All

metal components are pre treated with zinc

phosphating in 7 tank process and then powder

coated with epoxy polyester powder coating . Safe

working load is 135kg .The rate shall include all

materials, hardware, and labour etc. complete as

per instruction of

engineer-in charge.

supplying and fixing s.s 304 laboratory stool for

hospital used PSP-1037-SS Stool 14" Square

stainless steel 18 gauge contoured seat Stainless

steel base with heel rest for added comfort Rupees Nine Hundred Twenty and

Tubular legs fitted with rubber shoes pretreated

Zero Paisa Only

and power coated. As directed by Engineer in

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Ward Care Bed Delux (Plain Bed) (I.C. 7500)

(1900mmL X 91OmmW X 61OmmH .) Providing

& Supplying a Ward Care Bed Frame work of

specially designed CRC rectangular heavy tube.

machine pressed CRC sheet top with proper

Sq. Rupees Four Thousand Five Hundred

99 13 (BHAVNA) 10.32 support. SS head & foot bows with laminated

and Zero Paisa Only

panels. Four side saline arrangement location L.eg

with shoes. Pretreated & Powder coated. Selection

as per Engineer-In-Charge etc. completed. ( As per

Photo attached)

Supplying of Dust bin of approved brand Sintex or

Rupees One Thousand Five Hundred

100 14 (BHAVNA) 2.00 equivalent (as per photographs) of 100 Liter Nos.

Sixty and Zero Paisa Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying of Storwel with

Greenguard, Indoor Advantage Gold, GreenPro

etc. & should be mandatorily submitted along with

Bid.Storwel plain shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded

construction. It should have the shelf thickness of

0.7 mm, Back thickness of 0.8mm, Door thickness

of 0.8mm (high yield strength) and all other

components shall have a thickness of 0.9mm. These

components shall be made of CRCA ‘D’ grade high

yield strength as per IS:513. The Storwel Plain Rupees Fourteen Thousand Four

101 33 (BHAVNA)

should have a Mazak handle and Three way

Hundred and Zero Paisa Only

locking mechanism with Shooting Bolts. It should

have a height wise adjustable shelf mounting which

shall have a Uniformly Distributed Load Capacity

of max 40 Kg. It should also have a M10 Screw

type Leveller with Hex plastic base. The finishing

shall include Epoxy powder coated to the thickness

of 50 microns (+/- 10). Plenty of colour options and

shelving options shall be available.The rate shall

include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Providing and Placing Slotted Angle Rack :

Rupees Eight Thousand Five Hundred

102 65 (BHAVNA) 2.00 W X 500 D X 1895 H mm. To be provided with 5 Nos.

and Zero Paisa Only

Shelves. Blotless Rack made of CRCA Steel.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying main table with ERU. Main

Table with ERU of the following specifications. Its

size shall be 1650 Width x 700 Depth x 743 Height

(Main Desk) 1000 Width X 450Depth X 743 Height

(ERU).Top shall be of 18 mm thickness made of

PLT board with 2 mm Edge banding. Wenge and

savannah Maple PLT board shall be used. The

Understructure shall be in pre-laminated panels Rupees Twenty Eight Thousand Five

103 69 (We Souce)

made with PLT boards . 2- Drawerand 3 - Drawer

Hundred and Zero Paisa Only

storage units with different combinations to

support tops made with 18 mm PLT boards of

different colours.Modesty and back panels made

with 18 mm PLT boards. The pedestals / storages

shall be fitted with necessary locks. The rate shall

include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying public seating. SEAT

SHELL : The Seat is made from high density self-

skin Polyurethane foam reinforced with 1.2 mm

M.S. perforated sheet insert. The Polyurethane

foam having density of min. 350 kg/m3 with a

Shore 'A' hardness of 60±10.SEAT SIZE : 52.0 cm

(W) x 50.5 cm (D)BACK SHELL : The Back is

made from high density self-skin Polyurethane

foam reinforced with 1.2 mm M.S. perforated sheet

insert.The Polyurethane Foam having density of

min. 350 kg/m3 with a Shore 'A' hardness of

60±10.BACK SIZE : 52.0 cm (W) x 53.5 cm

(H)CROSS BEAM : Cross Beam made up of

Rupees Twenty Thousand Five

104 74 (BHAVNA) 3.00 Diamond shaped double wall Extrusion of Nos.

Hundred and Zero Paisa Only

Aluminum 6063-T6 Alloy with coated of 50 micron

epoxy polyester coating and fitted with

Polypropylene Copolymer engineering plastic end

caps.CROSS BEAM SIZE : 11.3 cm (W) x 9.4 cm

(H) X 0.4 cm (Thickness).LEG

: Legs are made up of High pressure Aluminum

ADC12 Die cast coated with 50 micron epoxy

polyester coating, Leg Are fitted with soft grip

PVC level adjusting shoes.ARMREST : Armrest

are made up of High pressure Aluminum ADC12

die cast coated with 50 micron epoxy polyester

coating.SEAT SUPPORT BRACKET Assembly :

Seat support bracket assembly made up of argon

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying classroom chair. SEAT

/ BACK: The seat sub-assembly should be

made up of 1.2±0.1cm thk Plywood upholstered

with moulded foam and polyester fabric and

covered with an injection-moulded

polypropylene outer cover. The seat can tip-up

when not in use and thshould be feature can

be used while stacking the chairs horizontally

The back sub-assembly should be made up of

injection-moulded polypropylene inner

upholstered with moulded foam and polyester

fabric and covered with an injection-moulded

polypropylene outer cover. The contoured back

Rupees Eight Thousand Two Hundred

105 127 (We Source) 6.00 with width extension at the bottom should be a Nos.

Ninety Nine and Zero Paisa Only

should be designed to give comfort to lower

back. The back flexing features allows the back

to tilt by 9c±2' to aid the user in adopting a

comfortable reclining posture. Both these sub-

assemblies should be fixed to the tubular

structure, BACK SIZE: 45.2cm (W) X 44.6cm

(H). SEAT SIZE: 47.0cm (W) X 50.0cm

(D)TUBULAR FRAME STRUCTURE: The

powder-coated 4 leg structure should be made

±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W.

Tube front and rear leg welded along with

connecting tube made of 1.9 ±-0.02cm dia x

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and Placing Single Bed Mattress

,pillow,bedsheet with pillow cover ,with 12mm

thick prelam mdf back‐ 900x1950x100mm ‐

goldline plus pu form 40 density 300 gsm cottan

satin quilt cover.Mattress back putti made of

Rupees Nine Thousand Five Hundred

106 105 (BHAVNA) 6.00 12mm thick prelam mdf bothside white Nos.

Fifty Eight and Zero Paisa Only

finish.Kurlon dew pillow 600x400 Fill: Polyester

Fibre Quality of shell fabric: 110 GSM

cotton satin patti Outer Shell Layer: Cotton Fill

Weight (in gms): 650.Bedsheet with pillow 100%

cotton of bombay dyeing or eq.

Providing & Supplying office table of the following

specifications. Its size shall be 1200 Width x

Depth x 740 Height . The top shall be made from

25 mm thick pre- laminated board . All the edges

are sealed with 2 mm thick PVC edge band all

around . Side panels shall be made from 25 mm

thick pre- laminated paticle board . All the edges

are sealed with 2 mm thick PVC edge band on the

user side and 0.8 mm on the top and bottom side

.The side panels have 2 glide screws each for

levelling of the desk.

Modesty panel shall be made from 18 mm thick Rupees Seven Thousand Sixty and

107 109 (BHAVNA)

pre- laminated particle board . All the edges are

Zero Paisa Only

sealed with 0.8 mm thick PVC edge band all

around. Freestanding Pedestal shall be made from

18 mm pre- laminated particle board with a

combination of 2 mm and 0.8 mm PVC edge band

on all the exposed surfaces as per requirement .

The drawers are provided with suitable slides for

smooth operation . All the pedestal drawers are

centrally locked with a single key .Drawer slides

are of Hettich.The rate shall include all

materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying hospital locker. The

bedside locker has single drawer and cabinet

with lock and with plastic molded handle.

There is space between plastic top and the

cabinet to keep the general items for the

frequent use. Cabinet is Provisionided with lock

to keep the valuable items for the safety.

overall dimensions should be 490mmW x

410mm D x 941mm H.Corner tube made of

ERW round tube with section 25.4 mm dia of Rupees Eleven Thousand Nine

108 04 (We source)

1.2 mm thickness.Cabinet made of CRCA sheet

Hundred One and Zero Paisa Only

0.8 mm thick Provided with lock.( 470 mm x

410 mm x 382 mm).Top made of ABS of

mm thick. Top has recessed and contoured

shape for better aesthetic and

usability.Plastic molded knob is Provisionided

with Matt finish and dome shaped for better

grip.Plastic molded castors with 50 mm dia

placed in diagonal locking

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying of Examination couch

with full storage of Examination couch with

full storage- Overall dimension 1975 mm (L) x

560 mm ( W) x 805 mm (H). Examination

couch with three drawers with three cabinets,

inbuilt step stool and BP tray holder.the base

frame should made of 30 mm x 30 mmX

thick ERW tube. The cabinets should made of

1 mm thick CRCA sheet with recessed plastic

handles and with lock and plastic door latch.

the hindges of the cabinet should be made of

sheet metal and pin arrangement. The internal

dimension of the two sidecabinets should be

Rupees Forty One Thousand Nine

109 Wesource-7 1.00 422 mm (W) x 455 mm (D) x 540 mm (H). Nos.

Hundred and Zero Paisa Only

the internal dimension of the centarl cabinet

should be 422 mm

(W) x 455 mm (D) x 358 mm (H). The storage

cabinet unit should be mount tubular base

frame. The head rest should be adjustable on

gas spring which should be actuated with C

shaped handle lever . The drawers should

made of 1 mm thick CRCA sheet with

recessed plastic handles and work on double

extension ball slides

for smooth glide. the internal dimension of the

drawer should be 330 mm (W) x 427 mm (D)

x 92 mm (H). The mattress platform should be

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying of Gynec couch with

full storage of Examination couch with full

storage- O overall dimension of L 2065 X W

850 X H 850 mm. The backrest has ratchet

mechanism for tilting the backrest. Leg frames

& intermediate frames should be made of

ERW tubes having section of 30 x 30 square

tubes with thickness of 1.6mm. Nylon 6 leg

shoes is given to avoid wear & tear. MS sheet

metal lying surface of thickness 1.2mm is used.

Top sheet metal panel base frame of 25 x

ERW square tubes of thickness 1.6mm is used. Rupees Twenty Six Thousand Six

Ratchet is made of MS Strip with section 40 x

Hundred and Zero Paisa Only

4 to Provision the backrest tilt. The table is

Provided with Leathrite calf rest which is

adjusted on ss304 made lithotomy rod. The

Rod and the calf rest is ht adjustable and

swivel to achieve desired position.

The table is Provided with SS bowl stand to

collect fluids and discharge during procedure.

Table is pre-treated and powder coated with

epoxy powder coating. Safe

working load is 135kg. The rate shall include

all materials, hardware, and labour etc.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying Foldable wheel chair

should have Foldable wheel chair with Over

all dimension should be (L) 790 x (W) 600 x

(H) 870mm Foldable frame structure should be

made of section 22x1.2mm A3 carbon steel

with chrome finish. Cross bar should be made

of A3 carbon steel with section 25.4 x

1.2mm.The Rear wheel should be made of

inch Solid mag wheels with alloy in the rim

Rupees Sixteen Thousand Two

111 Wesource -16 1.00 .Integrated handrim shoud be provided to drive Nos.

Hundred Ninety and Zero Paisa Only

the wheel chair of section 16x1.2mm A3 carbon

steel with chrome finish. The front wheel

should be of 8 inch HUB made of PA polymer

and outer with solid rubber. PU molded arm

rest & base should

be made of ABS for better arm support .There

should be Leatherite strap for calf rest &

leatherite cushion for seat. The foot rest should

be Adjustable alluminimum

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying Three-Fold partition

screen should have Three-Fold partition screen-

Overall dimension: L 2637 X W 640 x H 1720 MM.

Frame should be made of ERW tube with movable

plastic hinges. The fix frame should be made of

25.4 mm dia 1.2 mm thich ERW tube, the movable

frame shouuld be made of 19.05 mm dia 1.2 mm

thich ERW tube and the leg frame should be made

of 30 mm suqare tube with 1.6 mm .thick. The Rupees Ten Thousand Seventy Three

112 17 (We Source)

fixed portion should be 1075 mm width and the

and Zero Paisa Only

movable portion should be 778 mm width. 50 mm

dia wheel castors should be provided. All MS parts

should be pre treated and powder coated with

thermosetting epoxy polyester. Green color

Casement fabric must be provided for modesty.The

rate shall include all materials, hardware, and

labour etc. complete as per instruction of engineer-

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplyin .Mid Back Chair.

SEAT/BACK A SSEMBLY: The seat is made up of

1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection

mou1ded glass filled nylon & upholstered using

Mesh fabric with high tenacity yarn.* SEAT SIZE

: 47.0 cm. (W) x 51.5 cm (D).* BACK SIZE :

cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR)

POLYURETHANE FOAM: The HR polyurethane

seat foam is moulded with density 45+/-2 kg/m° and

hardness 16 ± 2 kgf as per IS:7888 for 25%

compression.ARMRESTS : The adjustable armrest

is designed with the following features : Rupees Eleven Thousand Two

113 126 (Wesource) 3.00 • Up-Down adjustment- 8 steps (8 0±0.Scm range)• Nos. 11236.00 Hundred Thirty Six and Zero Paisa

Height adjustable armrest structure which is Only

Powder Coated & fitted with an armrest top.

• Fixed Armrest Top is PU moulded over metal

insert.LUMBAR SUPPORT ASSEMBLY: The

Lumbar support consists of polypropylene pad

with moulded polyurethane foam & covered with

polyester fabric.The Height of Lumbar pad can be

adjusted through two projecting knobs provided on

the rear side of the pa6. Lumbar pad has an

± 0.5 cm in height.FRONT PIVOT SYNCHRO

MECHANISM: The adjustable tilting mechanism

is designedwith the following features.• 360°

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & Supplying Leatherette chair with

High Back Chair. SEAT/BACK ASSEMBLY :

The Cushioned seat should be made of Injection

molded Plastic outer & inner. Plastic Inner should

be upholstered with pure leather and moulded

High Resilience (HR) Polyurethane foam of Density

45±2 kg/m3,and hardness load 16 ± 2 kgf for 25%

compression.The Cushioned back should be made

of PU Foam with insitu molded MS E.R.W Round

Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It

upholstered with Pure Leather.Seat SIZE :

cm. (W) x 49.2 cm. (D)BACK SIZE : 47.5 cm. (W)

x 77 cm. (D)ARMRESTS: The armrest top should

Rupees Twenty Thousand Five

114 67 (We Source) 1.00 be moulded from polyurethane(PU), upholstered Nos.

Hundred and Zero Paisa Only

in pure leather and mounted on to a drop lift

adjustable type tubular armrest support made of

03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube

having chrome plated finish.The armrest height

adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-

SYNCHRO MECHANISM: The adjustable tilting

mechanism should be designed with the following

features:• 360° revolving type.• Front-pivot for tilt

with feet resting on ground and continuous lumbar

support ensuring more comfort.• Tilt tension

adjustment can be operated in seating position.• 5-

position Tilt limiter giving option of variable tilt

angle to the chair.• Seat/back tilting ratio of 1: 2•

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden Rupees Four Hundred Eighty Five and

box, single mounting base frame covered with

Paisa Eighty One Only

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete. Cat lll

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME four or more step type electronic

fan regulator with separately mounted and

accessories with earth continuity of following type Rupees Six Hundred Seventy Four and

erected on PVC / Metallic/Wooden box, single

Paisa Sixty Eight Only

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. Cat lll

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic/Wooden box

Rupees Five Hundred Ten and Paisa

117 1-2-3. 28.00 covered with appropriate front plate modules Pt.

erected on / in wall / ceiling as per pipe erected

with following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board(f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat lll

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with Rupees Seven Hundred Forty Five and

medium class Rigid PVC pipe and accessories

Paisa Thirty Eight Only

erected concealed in wall/ceiling complete Cat lll

[III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

Rupees Eight Hundred Seventy One

119 18.00 wire from mcb d b board.(f) with medium class Pt.

and Paisa Sixty Three Only

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat lll

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base Rupees Two Hundred Fifty Seven and

frame covered with textured / metallic/white front

Paisa Fifty Five Only

plate modules erected on / in wall / ceiling with

following type accessories Cat lll

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type

switches and following type of accessories erected

on PVC / Metallic/Wooden box, single mounting Rupees Six Hundred Three and Paisa

base frame covered with textured / metallic/white

Ninety Eight Only

front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat lll

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

Rupees One Hundred Fifty One and

122 1-2-6. 15.00 textured / metallic/white front plate , modules Ea

Paisa Fifty Only

erected with necessary connections as per site

situation directed by Engineer In charge.(1)One

No. SP 6 Amp. Cat lll

Rupees One Hundred Fifty One and

123 1-2-6. 15.00 (2) One No 5 pin plug Cat lll Ea

Paisa Fifty Only

(3) Two Pin/RJ-11 Telephone Socket [A] For One Rupees One Hundred Sixty and Paisa

Fifty Nine Only

Rupees Twenty Five and Paisa Twenty

125 1-2-6. 20.00 (7) Blank Plate Single Cat lll Ea

Rupees One Hundred Sixty and Paisa

126 1-2-6. 7.00 (8) Computer RJ-45 socket Cat lll Ea

Fifty Nine Only

Rupees One Hundred Eighty and

127 1-2-6. 12.00 (9) 16 Amp. SP one way switch Cat lll Ea

Paisa Seventy Nine Only

Rupees One Hundred Ninety Nine and

128 1-2-6. 12.00 (10) 6/16Amp. Universal socket Cat lll Ea

Paisa Ninety Eight Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary Rupees Twenty Four and Paisa

PVC fittings & Junction boxes fixed with adhesive

Twenty Four Only

solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

Rupees Thirty Three and Paisa Thirty

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC Rupees Seventeen and Paisa

bushes, Check-nuts etc. complete of following

sizes.(1) 20 mm

Rupees Twenty One and Paisa Twenty

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with Rupees Sixty Two and Paisa Sixty

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 1.5 sq. mm

Rupees Eighty Two and Paisa Eighty

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper Rupees One Hundred Twelve and

conductor FRLS PVC insulated stranded wire of

Paisa Eleven Only

green colour for earth continuity of following

size(A) with medium class Rigid PVC pipe and

accessories(a) 2 wire 4 sq. mm

Rupees One Hundred Forty Seven and

Paisa Forty Six Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Rupees Four Hundred Twenty Five

137 1-4-2. 70.00 (i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr.

and Paisa Twenty One Only

Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI marked Rupees Forty Six and Paisa Forty Six

copper wires of following size to be erected as

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Rupees Twenty and Paisa Twenty

139 1-4-7. 180.00 Jacket suitable for telephone wiring & confirming Mtr.

to C-DOT erected in existing pipe. of following size

of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured 2) Two Pairs

Supplying & erecting approved make LAN cable of

Rupees Forty Seven and Paisa Forty

140 1-4-8. 230.00 following size in existing pipe as per direction [C] Mtr.

Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white Rupees One Thousand One Hundred

141 1-6-2.(B) 10.00 front plate,modules erected with necessary Ea 1133.22 Thirty Three and Paisa Twenty Two

connections as directed Only

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat lll

142 1-6-3. 53.00 Bakelite adopter for Holder to be erected. Ea 9.09 Rupees Nine and Paisa Nine Only

Supplying & erecting Electronic Type Cordless

Call Bell erected on PVC/Metal board having Rupees Two Hundred Fifty and Paisa

portable bell push working on D.C. & bell on 230V

Forty Eight Only

A.C. supply with cells / battery

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Rupees Three Hundred Seventy Three

Luminaire efficacy> 85 lumens/watt ,LED

and Paisa Seventy Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting Rupees One Hundred Eighty Eight and

suitable for E14 / E27 / B22 lamp holders, pf >=

Paisa Eighty Seven Only

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iii) 10 to 15 watts Cat lll

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %,

Rupees Two Thousand Two Hundred

146 2-16-1. 13.00 CCT 3000 K to 5700K,Uniformity ratio >0.45, Ea

One and Paisa Eighty Only

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.(iii) above 24 to

Providing Approved make Triple Pole Metal / Iron Rupees Three Thousand Four Hundred

147 3-1-6. 1.00 Clad Switch & Fuse with neutral link 415/500 V Ea 3432.99 Thirty Two and Paisa Ninety Nine

confirming to IS (b) 100 A Only

providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed Rupees Six Thousand One Hundred

thermal & magnetic release suitable to work on

Seventy Three and Paisa Twelve Only

A.C. supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & Rupees Eight Thousand Fifty Five and

magnetic release suitable to work on A.C.supply

Paisa Seventy Six Only

c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

Rupees One Hundred Twelve and

150 3-10-1.(B) 50.00 A.C. system and having breaking capacity 10 KA Ea

Paisa Eleven Only

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat lll

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

Rupees Three Hundred Thirty and

151 3-10-2. 5.00 having 10 KA breaking capacity & confirms to IS : Ea

Paisa Twenty Seven Only

8828 in existing box having following capacity (B)

40 Amp. Cat lll

Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

Rupees Two Hundred Ninety Five and

152 3-10-3. 5.00 breaking capacity & confirms to IS : 8828 in Ea

Paisa Ninety Three Only

existing box having following capacity (B) 40 Amp.

Providing & erecting 415V MCB Four Pole Switch

for Lighting Load (B curve) having 10KA breaking Rupees Six Hundred Thirty Eight and

capacity & confirms to IS :8828 in existing box

Paisa Thirty Two Only

having following capacity (b)40 Amp. Cat lll

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

Rupees Six Hundred Sixty Eight and

154 3-10-5. 3.00 breaking capacity & confirms to IS :8828 in Ea

Paisa Sixty Two Only

existing box having following capacity (b)40 Amp.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & erecting 415 V MCB three Pole for

Motor & Inductive Load (C Curve) having 10KA

Rupees Seven Hundred Sixteen and

155 3-10-6. 3.00 breaking capacity & confirms to IS :8828 in Ea

Paisa Nine Only

existing box having following capacity (c)63 Amp.

Plastic enclosure fitted with DIN rail suitable for Rupees One Hundred Eight and Paisa

incorporating Three /Four nos. MCB

Sheets steel powder coated enclosure suitable for Rupees One Hundred Seventy Six and

incorporating One/Two nos. MCB.

Paisa Seventy Five Only

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 Rupees One Thousand Four Hundred

158 3-11-5. 3.00 without MCB to house appropriate nos. of Ea 1492.78 Ninety Two and Paisa Seventy Eight

MCBs.(The DBs should be used of same company Only

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

(B) three phase incoming and single phase

Rupees Three Thousand Four Hundred

159 3-11-5. 1.00 horizontal type outgoing Per phase isolation type Ea

Twelve and Paisa Seventy Nine Only

(PPI) (b) sheet steel double door (iii)8 way

providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on

Rupees Two Thousand Two Hundred

160 3-12-1. 3.00 single phase 240 V,50Hz. having characteristic of Ea

Thirty Five and Paisa Thirteen Only

quick action & tripping with all advance feature &

do not incorporate any electronic component. for

following Max. rating erected as directed (ii)

40Amps. DP Cat lll

Providing and erecting metallic vitrified danger

notice board as per language suggested by engineer Rupees Sixty Nine and Paisa Sixty

incharge for MEDIUM VOLTAGE installation to

be erected as per IS-2551.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and erecting Annealed bare Copper wire Rupees Seven Hundred Ninety Four

and Paisa Eighty Seven Only

Providing and erecting Pipe type earthing with

mm dia 2.5 mtr long 'B' grade G.I. pipe with

Rupees Eight Hundred Twenty Three

163 3-14-6-B. 1.00 necessary coupling buch buried in specially Ea

and Paisa Fifteen Only

prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed

For using salt and charcoal / coke as required for Rupees One Hundred Seventy One

pipe type earthing.

and Paisa Seventy Only

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty

Rupees Four Thousand Five Hundred

165 3-14-9. 4.00 cover.(approved make OEM has to submit test Ea

Ninety One and Paisa Forty Six Only

certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

/ meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper- Rupees Fourteen Thousand Nine

166 3-16-1. 1.50 aluminium strips, rubber grommets, rib, bakelite

14902.55 Hundred Two and Paisa Fifty Five

control fuses/MCB for measuring instruments, Only

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size.(B)

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

Rn. Rupees One Thousand Nine Hundred

167 3-8-2. 1.00 insulating tape for phase sequence of following

Sixty One and Paisa Forty Two Only

current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to

each bar, erected in existing cubical panel with

necessary connections.(A) Suitable for 100 Amp.

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

Rupees Ninety One and Paisa Ninety

168 1-4-4. 10.00 existing pipe of following size (Specifically for Mtr.

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(f) One wire

Rupees One Hundred Forty Two and

169 10.00 (g) One wire 16.00 sq. mm Mtr.

Paisa Forty One Only

Supplying and erecting approved make panel

mounting type Digital Voltmeter having 3 digits Rupees One Thousand Two Hundred

170 9-2-2. 1.00 LED display, 0 to 750 AC Volts range erected on Ea 1275.63 Seventy Five and Paisa Sixty Three

existing panel board with all connection, wiring etc Only

.with manufacturers calibration certificate.

Supplying and erecting approved make panel

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

Rupees One Thousand Five Hundred

171 9-2-4. 1.00 0 to 1000 Amps suitable to operate on 500 Volt AC Ea

Fifty Eight and Paisa Forty Three Only

, erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & erecting L.T. Current Transformer

with bar primary 50/5 to 1000/5 ratio 15 VA Rupees Two Hundred Seventy Four

burden erected in existing CRCA box duly secured

and Paisa Seventy Two Only

with insulating materials connected to the meter

Supplying and erecting approved make suitable

panel indicator lamps of LED type lamp, lens Rupees Forty Three and Paisa Forty

cover, Bakelite holder complete erected with

necessary connections.

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

Rupees One Hundred Seventeen and

174 4-3-4. 230.00 conductor for 1.1 KV. to be laid on wall with Mtr.

Paisa Sixteen Only

necessary clamps or in existing trench / pipe of

following size of cables (a) 4 core 4 Sq. mm

Rupees One Hundred Twenty Six and

175 80.00 (b) 4 core 6 Sq. mm Mtr.

Paisa Twenty Five Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary Rupees Two Hundred Eighty Four and

clamps or in existing trench / pipe of following size

Paisa Eighty Two Only

of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all Rupees Fifty Five and Paisa Fifty Five

over the run and back filling the same and making

the surface as normal ground.

Making trench in Hard Murrum / Tar Road of

suitable width of 90 cm or required depth for

Rupees Seventy Four and Paisa

178 4-5-2. 40.00 laying any size of cable or locating the fault all Mtr.

Seventy Four Only

over the run and back filling the same and making

the surface as normal ground.

Supplying following size of Light duty “A” Class

Rupees Three Hundred and Paisa

179 4-5-6. 45.00 G.I . Pipe & erecting as directed by Engineer-in- Mtr.

Ninety Eight Only

charge. (B) 50 mm dia

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

Rupees Sixty Two and Paisa Sixty

180 4-5-8. 90.00 necessary connecting accessories of same material Mtr.

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete Rupees Seventy Five and Paisa

with out going tails, insulating tape etc for

Seventy Five Only

following size of cables.(B) 3 & 1/2 core 35/50 Sq.

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

Rupees Thirty Three and Paisa Thirty

182 4-6-1. 18.00 armoured cable complete with out going tails, Ea

insulating tape etc for following size of cables.(A)

to 4 core 2.5 / 4 Sq. mm

Rupees Thirty Eight and Paisa Thirty

183 2.00 (B) 2 to 4 core 6 Sq. mm Ea

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

Ea 6.06 Rupees Six and Paisa Six Only

brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Rupees Twenty and Paisa Twenty

Solder less crimping type Copper lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated

Ea 8.08 Rupees Eight and Paisa Eight Only

nut bolts in an approved manner. (A) 1.5/2.5 to

187 20.00 (B) 10 Sq.mm Ea 10.10 Rupees Ten and Paisa Ten Only

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Providing and erecting Approved make Ceiling fan

with double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete, Rupees One Thousand Five Hundred

canopy erected on existing hook or clamp with

Ninety Six and Paisa Eighty One Only

earthing. [Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly Rupees One Hundred Eight and Paisa

painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

Rupees One Hundred Eight and Paisa

190 5-2-3. 28.00 length each side and pierced through a 16 Gauge Ea

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to Rupees Eighteen and Paisa Eighteen

cover the fan hook or Fan box.

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS Rupees One Thousand Seven Hundred

body with inbuilt lowers & square frame.200mm

Three and Paisa Eighty Seven Only

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty

ring mounted low noise operation suitable for Rupees Two Thousand Fifty Four and

medium duty having following dia size and

Paisa Thirty Four Only

maximum speed in RPM [A] 305 mm dia 900 RPM

Providing recess in wall or window frame suitable

for erection of Exhaust fan complete with

plastering and colour washing to match the colour Rupees One Hundred Eighty Nine and

of the wall or window complete with expanded

Paisa Eighty Eight Only

metal in order to render the fitting in accessible

and the room water-proof.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Supplying & erecting electro galvanised G.I. wire

micro mesh jali cover of grade 304 required size Sq. Rupees Six Hundred Thirty Four and

with suitable wooden frame duly fitted in wall Mtr.

Paisa Twenty Eight Only

outside of exhaust fan for insect protection.

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

Rupees Four Hundred Seventy Six and

196 6-4-3. 13.00 hinged doors as per requirement having locking Ea

Paisa Seventy Two Only

arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(

c)150mm x 125mm x 100mm [deep]

Supplying and erecting B class galvanised iron pipe

32 mm outside dia 45 cm long duly welded on

cm x 20 cm x 3 mm thick M.S. base plate, erected Rupees Three Hundred Forty Three

on wall or corner for mounting street light

and Paisa Forty Only

luminaire with necessary hardware materials duly

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per

hour @ an ambient temp of 45˚ C. The outlet temp.

of the water should drop by 15˚C within a hour,

Rupees Fifty Five Thousand Eight

The water cooler should be comprising of

hermetically sealed compressor, fan motor,

Ea 55893.40 Hundred Ninety Three and Paisa Forty

condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body

of water cooler will be made from Stainless Steel.

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC Rupees Twenty Nine Thousand One

199 8-13-6. 1.00 pump capacity 80 psi, mention with 40 psi inline Ea 29187.99 Hundred Eighty Seven and Paisa

type post carbon filter auto low & high pressure Ninety Nine Only

switches with following size of storage tank & LPH

capacity & erected as directed [C] 50 Ltr / Hr with

150 psi 2 nos booster pump

Providing & erecting open well type horizontal

mono block pump set with stainless steel body

having following specification (C) 1 H.P. single Rupees Nine Thousand Six Hundred

phase open well motor pump set suitable for

Thirteen and Paisa Eighteen Only

LPM discharge @ 25 mtr. head, suitable for 32 mm

dia. Delivery pipe with control panel.Cat ll

Quantities Rates 2021-22 (with 1% L.C)

NBO No. Item Description Unit In Figure Amount

Estimated Rs. Ps.

Lowering of submersible motor pump set at the

depth of following ,complete with required. Nos.

and size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking

Per Rupees Eight Hundred Fifty Six and

201 9-6-18. 1.00 of threads of each pipe with coupling to take the

Paisa Forty Eight Only

load of the pump set and pipe assembly filled up

with water (d)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to

Providing and erecting ISI marked PVC insulated

PVC Sheathed Flat flexible Submersible copper Rupees One Hundred Four and Paisa

cable approved make of following Size. (b) 3 Core

In Words Rupees One Crore Sixty Three Lakh Forty Five Thousand Nine Hundred Thirty Five and Paisa Twenty Nine Only

* Estimated amount Put to tender

Add/Deduct__________________% above / below

1 All works shall be carried out as per Punlic Work Department and other specification of division or as directed.

2 All the columns in schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site ( prior commncement of work and its close). In all respect and hold good for work under all

4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in

5 To be continued on additional sheets,if found necessary.