Kerala

Financial Eval

Works

Civil Works - Buildings

Annual Plan-2025-26-TNDGP PROJECT.No.144/26-FRONT SHEETING OF VANHODE AND NEELOME ANGANWADI-WARD.No.5 IN THONDERNAD GRAMA PANCHAYATH FUND-MGNR-200000-General Civil Work

Local Self Government Department

THONDERNAD GP | Wayanad, Kerala

Amount: ₹1.7 LCloses: 15 Nov 2025Closed

Timeline

Published6 Nov 2025
Closed15 Nov 2025
Technical Evaluation7 Jan 2026
Financial Evaluation11 Feb 2026
Award—

Bids

Item Rate

1 Bid11 Feb 2026

#	Company	Amount	Rank	Status
1	KURIAN A K L1₹1.7 LAccepted-Finance	₹1.7 L	L1	Accepted-Finance Accepted Board Resolution No 1/3 Dated 16/01/2026

BoQ Comparative

Line Items (10)

Sl No	Description	Qty	Unit	KURIAN A K L1
1.00ROOFING SHEET FOR NEELOM ANGANAWADY
1.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.38	cum	335.74 ₹126.24 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.38	cum	8,620.24 ₹3,241.21 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	207.58	kg	174.58 ₹36,239.49 Lowest
1.00	OD288010/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	33.75	1 sqm	595.57 ₹20,100.49 Lowest
1.00	OD288980/2025-2026:Providing and fixing 150mm Dia Semi-Circular rain water gutters (4kgf/sqcm) with iron brackets 40x3mm size, necessary specials such as bend, tees bolts nuts and washer etc. all as per the direction of engineer in charge.	9	metre	418.71 ₹3,768.39 Lowest
1.01	13.71:Lettering with black Japan pint of approved brand and manufacture	200	per Letter per cm height	5.92 ₹1,184 Lowest
2.00ROOFING SHEET FOR VANHODE ANGANAWADY
2.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.38	cum	335.74 ₹126.24 Lowest
2.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.38	cum	8,620.24 ₹3,241.21 Lowest

Tender Value

₹1.7 L

EMD Value

₹4,235

Closing Date

15 Nov 2025, 2:00 pmClosed

Tender Inviting Organisation

Name

JAYARAJ K S

Address

THONDERNAD GP

Work Description

Annual Plan-2025-26-TNDGP PROJECT.No.144/26-FRONT SHEETING OF VANHODE AND NEELOME ANGANWADI-WARD.No.5 IN THONDERNAD GRAMA PANCHAYATH FUND-MGNR-200000-General Civil Work

Tender Information

Tender ID

2025_LSGD_808351_6

Reference Number

AE/TENDER/04A/2025-26/LSGD

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

THONDERNAD GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBILL OF QUANTITIES -BOQ (.xls)

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF E PAY FORM (.pdf)

RequiredSCANNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSCANNED COPY OF FORM OF TENDER (.pdf)

RequiredSBD DOWNLOADED FROM E TENDER WEBSITE (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹4,235

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

11 Feb 2026

Published

6 Nov 2025

Bid Opening

18 Nov 2025

Download Starts

6 Nov 2025

Download Ends

15 Nov 2025

Submission Starts

6 Nov 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Bid Opening Summary

finance_1374106.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.68 MB

Work Item Documents

BOQ_1374106.xls

BOQ • 0.30 MB

viewnit144.pdf

Tender Documents • 0.04 MB

viewsbd144.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KURIAN A K

L1₹1.7 LAccepted-Finance

Sl No	Description	Qty	Unit	KURIAN A K L1
1.00ROOFING SHEET FOR NEELOM ANGANAWADY
1.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.38	cum	335.74 ₹126.24 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.38	cum	8,620.24 ₹3,241.21 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	207.58	kg	174.58 ₹36,239.49 Lowest
1.00	OD288010/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	33.75	1 sqm	595.57 ₹20,100.49 Lowest
1.00	OD288980/2025-2026:Providing and fixing 150mm Dia Semi-Circular rain water gutters (4kgf/sqcm) with iron brackets 40x3mm size, necessary specials such as bend, tees bolts nuts and washer etc. all as per the direction of engineer in charge.	9	metre	418.71 ₹3,768.39 Lowest
1.01	13.71:Lettering with black Japan pint of approved brand and manufacture	200	per Letter per cm height	5.92 ₹1,184 Lowest
2.00ROOFING SHEET FOR VANHODE ANGANAWADY
2.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.38	cum	335.74 ₹126.24 Lowest
2.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.38	cum	8,620.24 ₹3,241.21 Lowest

Sl No

Description

Qty

Unit

KURIAN A K

1.00ROOFING SHEET FOR NEELOM ANGANAWADY

1.00

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.38

cum

335.74

₹126.24

Lowest

1.00

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.38

cum

8,620.24

₹3,241.21

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

207.58

174.58

₹36,239.49

Lowest

1.00

OD288010/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

33.75

1 sqm

595.57

₹20,100.49

Lowest

1.00

OD288980/2025-2026:Providing and fixing 150mm Dia Semi-Circular rain water gutters (4kgf/sqcm) with iron brackets 40x3mm size, necessary specials such as bend, tees bolts nuts and washer etc. all as per the direction of engineer in charge.

metre

418.71

₹3,768.39

Lowest

1.01

13.71:Lettering with black Japan pint of approved brand and manufacture

200

per Letter per cm height

5.92

₹1,184

Lowest

2.00ROOFING SHEET FOR VANHODE ANGANAWADY

2.00

0.38

cum

335.74

₹126.24

Lowest

2.00

0.38

cum

8,620.24

₹3,241.21

Lowest