IPR/TN/CIVIL/04/2022

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Note:- Removing of emulsion paint, white wash, oil paint or enamel paint for Internal wall, exterior paint on external wall (including washing), wood work, steel work etc. by sand paper, wire brush, roll paper etc. to reveive new painting treatments. Rates includes scaffolding. Measurements will be done as per relevant IS Code. Complete all as directed by EIC.

Providing and applying white cement based putty two or more coat to achieve required finish on wall, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Note:-for internal walls only, Rates includes scaffolding and sand papering of wall after putty. The thickness of putty should be 0.25 mm or more. Measurements will be done as per relevant IS Code

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer Note:- For Internal wall & ceiling only, rates includes scaffolding. Measurements will be done as per relevant IS Code. Complete all as directed by EIC

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour In TWO coat. Note:- Rates includes scaffolding, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). Measurements will be done as per relevant IS Code. Complete all as directed by EIC

Providing and Applying two coats of Synthetic enamel paint on old doors and windows, MS members using 1st quality paint from approved manufacturer of approved colour and shade to give an even shade including scaffolding, removing of paint that is soft, blistered, loose or flanking & cleaning old surface, preparing the surface to receive paint including filling cracks and creaves with Putty or other approved filler materials, applying oil primer coats / anti corrosive zinc based yellow primer to steel work. cost also includes thinner, filler, putty, primer and other materials, necessary labours etc. complete as directed by Engineer in charge at all heights, in all floors. Note:-Measurements of doors and windows will be taken as per relevant IS code. (1) Synthitic enamel Paint of approved brand confirming to IS 2932 (2) Zinc based yellow Primer (3) Putty suitable to Mild steel members of approved brand (4) Putty on wood work - oil base putty

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work Note:- Rates includes scaffolding, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). Measurements will be done as per relevant IS Code. Complete all as directed by EIC

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on new work / old work Note : Measurements of doors and windows will be taken as per relevant IS code.

Providing & Applying high quality acrylic modified resin based texture of approved make with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, making the RCC slab smooth, remove uneveness, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. Note: Rate also includig for cutting of existing screws from the ceiling

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) Note- work to be carried out at any height and lead inside instutute including scaffolding, curing etc

Supplying and fixing glass panes with wooden fillet wherever necessary including removal of broken glass panes wherever necessary inlcuding scaffolding, disposing of broken glass pieces outside campus, stacking of useful glass as directed etc. - Float glass panes of nominal thickness 5 mm for any heights, leads and lift. The float glass shall conform to the IS 14900. (weight not less than 12.50 kg/sqm) - (Measurement will be taken for length and breadth of the fixed glass)

Providing and fixing of seasoned second class TEAK WOOD BATTENS of required size and class specified below for Glass fixing etc, including removing of the old damaged batten without damage to the glass including scaffolding, nail, screw, disposing of the damaged replaced glass outside campus for any heights, leads and lift. Using Second class seasoned TEAK WOOD. of Approximate size 10 x 10 MM / 12 x 12 MM (as required) -------- (Measurement will be taken in Rmt of the fixed batten)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete inclusive of making adjustments and sorting it for smooth operation, removing of old damaged door closer etc; complete all as per specifications.

Providing Carpenter (1st class) with helper for repairing work of door, windows, hardware fittings and fixture and other miscellaneous work with required carpentry tools and tackles, MS stair etc, as directed by Engineer in charge.

Dismantling of Gypsum false ceiling including insulation material, cutting of the existing screws, removing of the entire material out of campus up to any lead and lift as directed by Engineer in charge.

panwar construction company

EVEREST INFRASTRUCTURE CO

Shivdip Builders PVT.LTD.