Providing Mechanical Shutters to 2Nos - 2M x 3M Box Culverts for Additional Vents at Nalla Channel Drainage Pumping Station in 34th Division of RMC.(Under Pushkaram Funds)

Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sill beam, slide tracks, seal seats, guide plates etc. with all accessories including cost of all materials, machinery, labour, etc. complete as per specifications and approved drawings. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately). For EM Parts At Top

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately). For Sill Beams

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters, including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately.) For Gate

Painting of embedded metal parts and all types of gates, stoplogs, etc. on sand blasted surfaces with: One coat of inorganic zinc silicate (airless spray preferred) 70 ± 5 microns, and Two super coats with a total thickness of 300 microns (each 150 ± 5 microns) of solventless coal tar epoxy paint.Including cost of all materials, labour, scaffolding etc., complete with all leads and lifts.

Supply, delivery and fixing of gear box with thrust bearing, screw rod, operating handle etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Supply, delivery and fixing of spindle rod with (63 mm dia) threading etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Engaging 30 Tonnes Capacity Hydraulic Tower Crane of long length boom on hire basis including hire charges, fuel charges, crew charges and all operational charges etc., complete as directed by the site engineer.

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sill beam, slide tracks, seal seats, guide plates etc. with all accessories including cost of all materials, machinery, labour, etc. complete as per specifications and approved drawings. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately). For EM Parts At Top

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately). For Sill Beams

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters, including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately.) For Gate

Painting of embedded metal parts and all types of gates, stoplogs, etc. on sand blasted surfaces with: One coat of inorganic zinc silicate (airless spray preferred) 70 ± 5 microns, and Two super coats with a total thickness of 300 microns (each 150 ± 5 microns) of solventless coal tar epoxy paint.Including cost of all materials, labour, scaffolding etc., complete with all leads and lifts.

Supply, delivery and fixing of gear box with thrust bearing, screw rod, operating handle etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Supply, delivery and fixing of spindle rod with (63 mm dia) threading etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Engaging 30 Tonnes Capacity Hydraulic Tower Crane of long length boom on hire basis including hire charges, fuel charges, crew charges and all operational charges etc., complete as directed by the site engineer.