Supply, installation, testing and commissioning of Facade Lighting on Chintamani Bridge under Kumbh Mela-2027 (including 03 years of Operation and Maintenance)

Supply and Fixing of architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy . The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The fixture shall have 10° beam angle (±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 or above (better) rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 50W or above (better) and system lumen output of not less than 2100 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables.. with antitheft locking arrangement including MS/GI cage or as per direction of Engineer -in- charge .

Supply and Fixing of Content Program Controller with features of Single DMX ports control minimum 300 light addresses, Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage, USB 2.0 interface for downloading shows and configuring from attached PC,Flexible, adaptable mounting options ,Should be provided with light show authoring software, Direct line voltage power supports 100-240VAC,Minimum Five pre configurable effects :Using light authoring software to select from five pre-defined effects, adjust effect settings such as color, speed, and brightness. Soft Copy of Catalogues with Link of the official web page of Luminaries,

Supply and Fixing of of RDM-6Wall Splitter,should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications,Finish/Color-Polycarbonate,

Supply and laying of Armoured CAT 6 cable as per site requirement. Including casing made of SS with five year O&M Complete in all Respect.

Supply and laying of 2.5 Sq mm 3 core PVC insulated unarmoured multistrand copper cable as per site requirement. Including casing made of SS with five year O&M Complete in all Respect.

Supply and Laying of HDPE pipe 20 MM as per site requirement

Supply, Installation and testing of 3 Phase Servo Stablizer with minimum capicity of 30KVA, Oil cooled with 180-260 VAC Including casing made of SS with five year O&M Complete in all Respect.

SITC of Main Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options. - 5 Nos of 16- 32A TPN MCB Outgoing MCB's. - 1No of 63 A TPN Incoming MCCB. 25 KA, 40 KA Type II (3P+N) SPD with 32 A TPN MCB. including suitable size of cable etc as required to for making electrical connection as per direction of Enginner-in-charge.

Supply and fixing IP 67 boxes with all accessories as per site requirement. Size 200*150*75 mm.

SITC of chemical earthing included maintenance free Copper coated earth rod with Low carbon steel, high tensile strength copper bonded rod with min 250 microns of copper coating. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns min., Environment friendly, RoHS Certified low resistivity Carbon based Ground Enhancement material in 50 Kg pack to fill the bore area around the rod & providing of suitable connector and lug including excavation and refilling as per specification and directions of E/I, with poly plastic earth pit cover including locking arrangement and load bearing capacity 8 Ton complaining IEC 62561-5. including earth wire etc as required.