Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.2 L+₹11,396.91 (10.6%)Rejected-AOC KALAYATHINNAKUZHI HOUSE KUTTILANJIL | KOTTAYAM | KERALA | 686102 | L2 | Rejected-AOC L2 | |
| 3 | L3₹1.3 L+₹17,753.68 (16.5%)Rejected-AOC CHERUPURAM H CHERUVATTOOR P O | KANNUR | KERALA | 670001 | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | C.A.AZEES L3 | K M SEETHI L1 | KP MUHAMMED L2 |
|---|---|---|---|---|---|---|
| 1.00Anganwadi Sheet Roofing | ||||||
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 57.6 | sqm | 731.32 ₹42,124.03 | 627.9 ₹36,167.04 Lowest | 694.3 ₹39,991.68 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 312 | kg | 187.99 ₹58,652.88 | 161.4 ₹50,356.8 Lowest | 178.46 ₹55,679.52 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 116.16 | kg | 150.82 ₹17,519.25 | 129.49 ₹15,041.56 Lowest | 143.21 ₹16,635.27 |
| 1.00 | OD370756/2024-2025:Providing and fixing 200 mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connnections | 8 | metre | 487.76 ₹3,902.08 | 418.78 ₹3,350.24 Lowest | 463 ₹3,704 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.27 | cum | 7,910.94 ₹2,135.95 | 6,792.2 ₹1,833.89 Lowest | 7,511 ₹2,027.97 |
| 1.01 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 3.6 | sqm | 331.95 ₹1,195.02 | 285 ₹1,026 Lowest | 315 ₹1,134 |
Tender Value
₹1.3 L
EMD Value
₹3,170
Closing Date
21 Jun 2025, 6:00 pmClosed
Assistant Engineer
O/O ASSISTANT ENGINEER NELLIKUZHI GP
-NZY_2024_25_269/25- Kanjirakkattumolam SC Community Hall sheet roofing
2025_LSGD_769160_1
ET 01-06/2025-26/AE/LSGD/NZY
Open Tender
Civil Works - Buildings
Item Rate
NELLIKKUZHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
₹3,170
15 Sept 2025
13 Jun 2025
23 Jun 2025
13 Jun 2025
21 Jun 2025
13 Jun 2025
Amount
Anganwadi Sheet Roofing
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD370756/2024-2025:Providing and fixing 200 mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connnections
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
KP MUHAMMED (BID ID -2229629)
C.A.AZEES (BID ID -2228258)
Bidder Name
C.A.AZEES
KP MUHAMMED
K M SEETHI
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .