welcome maintenance to OMQ and periodical service to certain bldg including camouflage painting to water tank ratanada sharda park offrs mess mini met colony Habbibula bhatia block ranganathan met colony CWE office mandore and Bhagat ki kothi under A

Amount

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site.

Taking down Shutters of any description exc 2 sqm each and removing from site.

Taking down chowkats or frames exe 1.5 Sqm but n.exc 4 sqm each with shutter (without taking off shutters from the frame) and removing from site complete all as directed.

Taking down chowkhat or frame n exc 1.50 sqm each (with out taking of shutters from the frame) and removing from site complete all as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed

Dismantling wrought iron or mild steel work of any description in any possiton not otherwise provided for

Framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete

S&F in repairs steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete with glazing bar, devetailed or welded. Note:Quated rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars as directed by Engineer-in-Charge .

S&F, in repair Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F frame work such as guard bars ,grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors,ladders etc and similar wks conforming to Fe-290 grade E-165.

S & F Plain framed, panelled shutter of 2nd class hard wood (two panel) of 35mm thick factory made shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

M/L for factory made, Glazed and skeleton shutters for door/window, of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats Note: Glazed or cloth etc in panelsor sash square shall be measured seperately

S&F Galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F Butt hinges,extruted aluminium alloy with galvanised mild steel type C21of size 100 mm.

S/F floor door stoppers of alluminiun alloy body and toung , anodised with harddrawn steel spring with overall length of cover plate is 140 mm

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 250mm long.

S&F Extructed aluminium alloy handles, fabricated type,anodised of size 150mm.

S&F mild steel 300 mm helical door spring hinges with steel wire spring, stove enamelled black complete all as specified and as directed

S& F in repairs Prelaminatd particle board, interior grade 18/19 mm thick , prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as builtup furniture as specified and as directed,

S & F Plain fillets 2nd class hard wood of sectional area not exe 3 sq cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads.

S& F butt hinges ,40 mm of size cast brass with mild steel hinge pin, bright polished type B-11

S & F Continuous (piano) hinges,30mm flap brass, bright finish or electrogalvanised

S& F 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished.

S&F 9 mm thick plywood in repaire, grade BWR, type BB, fixed with screws/nails to any type of frame work/surface with wooden fillets/frame whereever necessary in any possition complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete(minimum weight 450 gms) complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.Minimum weight 450 gms. complete all as specified and directed.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions incl cutting of tiles and repair.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) complete all as specified and directed.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.) complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases stone concrete blocks pinning in making good to facing where required and pointing in CM 1:3 to ends or edge of landing steps cills sunshades shelves lintels eytc and cutting chases for conealed water tuibing making good not exceeding 10 cm girth for stone walls all as specified and directed.

S&F in repairs plastic water closet seat cover white or any colour closed padestrial pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified.

S&F in repairs PVC valveless, syphonic action type, high or low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets and connections to pies an fixing of chain and pull, or lever all as specified and directed.

S&F in repairs internal flushing cistern kit, washer, flushing handles etc.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs grating doom 100 mm dia of PTMT (minimum weight 25 gms) and fixing with gray or white cement all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

S&F in Repairs shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) ccomplete all as specified and directed.

S&F in repairs grating doom 125 mm dia with or without waste hole of PTMT (minimum weight 40 gms) and fixing with gray or white cement all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm all as specified and directed.

Disconnecting existing tanks of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site to store.

S&F in repairs solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors of best quality all as directed by Engineer-in-Charge.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) all as specified and directed.

S&F in repairs, 15 mm bore bib tap, standard of PTMT, any colour screwed for iron pipe and fixed (minimum weight 15mm – 90 gms) all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal from site all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories) all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes type ‘B’, single socketed, in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes type ‘B’, single socketed, in any length with rubber ring joints fixed to wall all as specified and directed.

S&F in repairs PVC (SWR) door bends 110 mm dia with acess door all as specified and directed.

All as per item No. 61.00 above but 75 mm dia..with acess door all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexble tube ABS wall hook including making connections and fixed complete in all respect as specified

S&F in repairs PVC waste pipe of 32 mm/40mm bore of suitable length for WHB/urinal/sink, complete all as specified.

S&F in repairs 15 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repairs waste coupling of PTMT for wash basin (half or full threaded) 32 mm bore of discharge pipe,(Minimum weight– 45 gms.) all as specified and directed.

S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minium weight 300 gms) all as specified and directed.

S&F in repairs for toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union all as specified.

S&F in repairs brass aluminium anodised towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws.

S&F PVC lid of PVC water tank suitable for 500/1000 litres capacity fixing to existing water tank with necessary fixing arrangment at any position all as specified and directed.

M&L for repairs to leakage in existing 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in existing 20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as specified and directed.

M&L for repairs to leakage in existing 25 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in floors of WC/Bath Room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap, suitable for type ‘B’ pipes, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good floor to match with existing floor all as directed by Engineer-in-Charge.

Fixing/tightening/hanging of kitchen rack, pilmet box, curtain rod with fancy type hook/brackets/holders in matching colour, cloth hanging wires, dressing tables/mirrors, towel rails/ring, and like on wall with screw/nails including all necessary fixing arrangements, complete all as specified and directed. Note: Quated rate for each article

S&F in repairs projecting type hinges of steel window/ventilator, 75 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs peg stay 250mm/300mm long stopping of steel windows/ventilators including welding(if required) & fixing complete all as directed by Engr-in-charge.

S & F in repairs stack clamps out of 50 mm x 5 mm flat iron and 16mm dia round iron stays including bolts and nuts & securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed.

M&L for Cement patch work on wall/floor etc area n. exc. 1 sqm and depth n exc 15cm each all as directed by Engineer-in-Charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

M&L Renewing Glazed ceramic tiles coloured in vertical surface 300x200x7mm thick in patches, area n exc 1 sq.m. including removing and cleaning old tiles, match with existing surface and set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 10mm thick rendering in CM 1:4 on stone or brick masonry surfaces as directed by Engineer-in-Charge.

M&L in repairs to sink made of stainless steel by providing waste coupling brass, chromium plated of 32 mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32 mm complete all as specified.

M&L in repairs to sink made of stainless steel by providing waste coupling brass, chromium plated of 40 mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 40 mm complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 40 mm bore and of suitable length, complete all as specified.

S&F in repairs sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 40 mm bore and of suitable length, complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish all as specified and directed.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed by Engineer-in-Charge

S&F in repairs stainless steel plate rack 0.56mm thick of standard pattern of size 750x600x250 mm complete as directed by Engineer-in-Charge

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane as directed by Engineer-in-Charge.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed.

Taking down shutters of any description n. exc. 1 sqm each and refixing in same opening after doing suitable repairing by hinges etc or as directed by Engineer-in-Charge

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and refixing in same opening after doing suitable repairing by provide hinges etc or as directed by Engineer-in-Charge.

S&F in repair mild steel 300 mm helical door spring hinges with steel wire spring, stove enamelled black complete all as specified and as directed

S/F in repair floor door stoppers of alluminiun alloy body and toung , anodised with harddrawn steel spring with overall length of cover plate is 140 mm

S&F in repairs aluminium handles, cast type, anodised, of size 150 mm.

S&F in repairs 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F in repairs 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm

S&F in repairs 100mm haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repair drapery rod in any length, high strengh MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engineer-in-charge

S&F in repair decorative finals ABS plastic fancy type bracket, fancy type hook in matching colour of steel powder quoted paint of same colour of rod incl all as directed Engineer-in-charge.

M&L for in repairs second class hard wood plain fillets of sectional area exc. 3 & n. exc. 6 sq.cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair butt hinges 100 mm long medium weight, cold rolled mild steel complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 1 sq.m but n exe 2.0 sqm each

Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 2.0 sqm each

S & F in repair Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified .

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick/concrete/stone work in CM 1:4 finished even and smooth without using exctra cement, in any possition complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of any type of work in CM 1:6 finished even and smooth without using exctra cement complete all as specified and directed.

M&L for 5mm thick rendering in CM(1:3) on ceiling/soffit/chajja etc stone/concrete surface in any possition, finish even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI marked as directed by Engineer-in-Charge

M&L for preparation of new plastered or unplastered surface of walls, applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1 mm thick Birla wall care putty on plastered surrfaces complete all as specified.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors as directed by Engineer-in-Charge.

M & L 40 mm thick plain cement concrete type B1 1:2:4 ( with 20mm graded aggregate) as in floors finishing cement concrete surface even and smooth with out using extra cement.

M & L 40 mm thick plain cement concrete type B1 1:2:4 ( with 20mm graded aggregate) as in sub base of floor all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified and as directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises as directed by Engineer-in-Charge

M&L for non skid coloured ceramic tiles, 7 to 8 mm thick in floors etc. area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 as directed by Engineer-in-Charge

M&L for non skid coloured ceramic tiles, 7 to 8 mm thick in floors and skirting etc. (square/rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 as directed by Engineer-in-Charge

M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone or brick masonry surfaces as directed by Engineer-in-Charge.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed. Note : The quoted rate shall be deemed to be included use of scaffoldings, trestles, ladders, cradles etc, necessary for execution of work and protective measures of any height.

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed. Note : The quoted rate shall be deemed to be included use of scaffoldings, trestles, ladders, cradles etc, necessary for execution of work and protective measures of any height.

M&L for preparationof old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying two coat of oil bound distemper (OBD) white or approved tinted including removing existing nails, if any and filling the disturbed /uneven surface, holes/voids with wall care putty 1.0 mm thick to achieve the smooth surface complete all as specified & directed.

M&L for complete removal of old treatment by mechanical means from walls and applying one coat of primer, 1 mm wall putty & sanding on plastered surfaces prepatatory to distempering and applying two coats of oil emulsion distemper white or tinted by pump roller applicator as directed by Engineer-in-Charge

M&L for preparationof old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying one coat (finish coat) of oil bound distemper (OBD) white or approved tinted including removing existing nails, if any and filling the disturbed /uneven surface, holes/voids with wall care putty to achieve the smooth surface complete all as specified & directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L forwashing rubbing down including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying one coats of cement base paint of approved shade/tint on walls all as specified and as directed.

M&L for preparation, removing/scrapping down existing surface of old painted brick, stone, concrete, asbestos plastered or un-plastered surfaces of walls and applying one coat (finished coat) of plastic emulsion paint of approved shade/tint incl applying one coat of primer complete all as specified and directed.

M&L for preparing old painted surfaces of wall etc. n. exc 0.1 sqm each including cutting in edges and applying one coat of synthetic enamel paint of approved tint, complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc 30 cm high using Ist quality, synthetic enamel paint of approved tint complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens brackets etc. using Ist quality, synthetic enamel paint of approved tint complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over complete all as specified & as directed.

Raking out joints/pointing to concrete block walling, stone masonry, any description, laid flat, work built in cement or cement lime mortar, complete all as specified & as directed .

Keyed pointing to concrete block walling, stone masonry, any description, laid flat, work built in cement or cement mortar, 1:4 complete all as specified & as directed .

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic varnish (Finish coat) including removing existing nails, if any and filling the disturbed /uneven surface, holes/voids with wall care putty/POP to achieve the smooth surface all as specified & as directed.

Preparing old painted/plastered or unplastered surface of wall, complete removal of existing treatment by steel wire brushing/metal sheet including washing rubbing down and stopping of distempered and painted surface and applying two coats of exterior emulsion paint in different tint/shade,(camouflage pattern), as approved by Accepting Officer, over one coat of alkali resistant primer as per manufacture's instructions and filling the disturbed /uneven surface, holes/voids with wall care putty/POP where ever necessary to achive the smooth surface all as specified and directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure esp water tanks of any height including necessary scaffolding

M&L for 50 mm thick (average) cement concrete 1:3:6 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

M&L Supply and laying of Atactic Polypropylene modited polymeric standard SoM membrane of weight not less than 3 kg/sqm, made out of 90 micron high density polyethyiene film sand witched between two layers of polymenc (ATACTIC POLY PROPYL ENT BASED) bitumen and finally leminated on both sides with 20 micron KiMHDPE him laid over and including a priming coat of applied @ 0.3 itreisq m with 100mm overlap of the membrane shall be fused uniformly By LPG torch flame and applying hot blown bitumen 85/25 grade @1.20 kg/sqm and the entire surface shall be painted with a coat of bituminious aluminium paint @100 mL/sqm complete all as specified and as directed by Engineer-in-Charge. (Work executed more than 01 locations)

Supply only integral water proofing compound ISI marked.

S&F 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or casr aluminium alloy.

S&F in repairs 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F for 100 mm long butt hinges, medium weight stainless steel.

S&F in repairs MS peg stay with 3 to 5 hooks fixed to doors /wall with screws

S&F floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each.

S&F teak wood lipping 6mm thick fixed with nails to 18/19mm thick block board/doors or veneered particle board.

S&F in repair Solid rubber beading of 30 to 50 mm wide and 3 to 5mm thick fixing at bottom to existing doors of best quality all as directed by E-I-C.

S&F PVC lid of PVC water tank suitable for 500/1000 ltrs capacity fixing to existing water tank with necesarry fixing arrangments at any possition.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples

S&F 18/19 mm thick , prelaminated particle board ISI marked interior grade pelaminated both sides with decorative choice laminations , fixed with screws to timber frame work for doors , partition on wall in cup board/ kitchen cabinets etc in shelves partition and shelves of built in cup board almirah book case toilet boxes racks pelmets etc and similar works

S&F 40 mm dia cupboard knobs of fixed with nut screw and washers of mild steel bright finished

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

S&F in repairs 15 mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe for wall

S&F in repairs 15 mm bore brass CP washbasin mixer for mixing hot & cold water incl all fixing with connection pipes etc

S&F in repairs PVC pressure jet for EWC heavy duty.

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges.

S&F in repairs stainless steel toilet paper holder fixed to walls with chromium plasted (CP) brass screws.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe PVC connection 15 mm size with PTMT nuts of length 450 mm.complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs single mirror bath room cabinet moulded body and framed (made from strong and fine quality ABS plastic ) with hinged door of size 16 " x 12 " x 6 " white or ivory colour fixed on wall with appropriate rawl plugs . Make : Prayag/Polytuff or equivalant

S&F in repairs Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf exc 15 cm wide with chromium plated bracket guard and railing

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F in repairs stainless steel plate rack 0.56mm thick of standard pattern of size 788x915x254 mm (if same size not avail count just next size) complete

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 Sqm but n. exc. 0.11 Sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for light & dark coloured vitrfifed tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1;6

M&L for 25mm thick PCC in sub-base Cement concrete type B-1,1:2:4 (20mm graded aggregate)

All as per item no. 184.00 above but on vertical surfaces such as dados skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick renedering in CM 1:4 on stone masonary surfaces

M&L for granite (of any type ) tiles 20 mm thick machine cut in skirting /dado over and including 10 mm thick rendering in CM 1:4 on stone masonry surfaces jointed with grey cement slurry and pointed with white cemewnt with admixture of pigment to match the shade of granite stone including grinding and polishing complete

S&F in repairs Stainless Steel Curtain in any length, high strength SS pipe having outer dia 20 mm all as directed by Engineer-in-Charge.

S&F in repairs decorative finals Stainless steel same colour of rod or as directed by Engineer-in-Charge.

M&L for providing and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not provided using chemical emulsion at therat of 7.5 ltr per Sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wal and rodding etc complete all as specified and directed.

S&F stack clamps out of 50mm by 5 mm flat iron & 16mm dia mild steel iron stay incl bolt & nuts & securing ends of stays to walls for 100mm pipe.

M&L Cleaning and removing Air blockage from water supply pipe line tank to kitchen, bath,Toilet or anyware in accn with open joints, or using pressure motor complete all as specified and as directed.

S&F in repairs coloured Alluminium strip beading of 18-20 mm wide and 2 to 3 mm thick with rubber sheet 20mm wide fixing at bottom to existing doors all as directed by Engineer-in-Charge.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium extruded section

M&L for filling of joints of tiles/WC & WHB corner with white cement area n. exc. 1 Sqm each all as directed by Engineer-in-Charge.

M&L for Tile repair patch work on wall/floor etc area n. exc. 1 Sqm and depth nexc 15cm with existing same colour tile each all as directed by Engineer-in-Charge.

JAMWAY MATA CONSTRUCTION COMPANY (BID ID -3299162)

Amresh Traders (BID ID -3294735)