Loading…
Loading…
Tender Value
₹37.6 L
EMD Value
₹38,000
Closing Date
8 Sept 2026, 6:10 pm
Executive Engineer, Sabarkantha Irrigation Division, Himatnagar
Constructing Security Cabin At 5 (Five) Various Location Of Hathmati Reservoir Project( Hathmati Dam , Indrasi Dam , Navalpur waste weir) Ta Himatnagar
338717
Tender Notice No 08 of 2026-27
Open
Civil Works
Works
Sabarkantha
7 documents required · 6 mandatory · 1 optional
₹1,500
Executive Engineer Sabarkantha Irrigation Division Himatnagar
₹38,000
25 Aug 2026
25 Aug 2026
25 Aug 2026
8 Sept 2026
25 Aug 2026
Item No. Quantity Rate In figures Unit Amount
(with brief specification and reference to book of specifications)
1 Item No.1 Excavation for foundation in all sorts of soil including yellow sandy gravelly soils ,soft & hard murrum etc. in dry condition
including depositing the excavated stuff in uniform layers in banks or as and where directed etc. complete for lead up to 500m and all lift. 295.000 107.80 Cum
(BY MACHINERY) (b)Including dewatering.
2 Item No.2 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in
depth consolidating each disposited layer by ramming and watering.
3 Item No.3 Providing & Laying in position "NOMINAL MIX" cement concrete using cement, sand and crushed aggregate by mass and
machine mix for C.C./R.C.C work incl. necessary formworks centering, scaffolding, compaction by vibrator, curing as directed with all
lead & lift etc complete Without Dewatering and excluding cost of steel reinforcement. (A) For Foundation concrete / General purpose,(a)
C. C. Nominal Mix, M-10 and MSA-40 mm
4 Item No.4 Providing and laying uncoursed rubble masonry in ordinary portland cement mortar 1:5 proportion in foundation including
curing etc. complete for all leads and lifts.
5 Item No.5 Providing and laying burnt brick masonry for superstructure with ordinary portland cement mortar 1:5 proportion including
providing scaffolding racking out joints curing etc. complete for all leads and lifts. (Conventional Bricks)
6 Item No.6 Half Brick work :Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) (B) Conventional
7 Item No.7 Providing & Laying in position "DESIGN MIX" cement concrete using cement sand and crushed aggregate for C.C./ R.C.C
work by "FLORI" including necessary formwork, centering,
scaffolding, compaction by vibrator, curing as directed with all 177.000 4543.00 Cmt
lead & lift etc complete without dewatering and excluding
the cost of steel reinforcement
8 Item No.8
Providing & Placing in position reinforcement bars including cutting, bending, welding joints where necessary, hooking etc. complete as 107.500 7194.00 Qtl
per drawing for all lead and lifts. TMT
9 Item No.9 Providing cement plaster in thickness and proportion as under including, smooth finishing, curing, scaffolding etc. complete
for all leads and lifts.Cement mortar 1:3 proportion.( b ) 12 mm thick.
10 Item No.10 20mm thick sand faced cement plaster(Gutka) on walls upto height 10 metres above ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 768.000 321.10 Sqmt
finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
11 Item No.11 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
12 Item No.12 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm
/ 300 mm x 450 mm x 8 mm in skirting, floors ,risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement: 3 79.000 1487.88 Sqmt
coarse sand) & jointed with white cement slurry.
13 Item No.13 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-
coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing 110.000 1019.00 Sqmt
etc. complete. (A) 25mm thick
Description of Item
Item No. Quantity Rate In figures Unit Amount
(with brief specification and reference to book of specifications)
14 Item No.14 Providing and fixing mirror polished 18 mm thick granite stone with full round edge and polished of approved quality in
clading on sill and around the doors/ windows/ ventilation with 12 mm thick cement mortor CM (1:4) and fixing with cement slurry & 51.000 2099.69 Sqmt
adhesive including moulding of exposed edges as directed by engineering in charge etc. complete.
15 Item No.15 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of
glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto
surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with 83.000 779.70 Sqmt
water and oxalic acid etc. as directed.
16 Item No.16 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and
frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.
17 Item No.17 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x
1.17mm @ wt.of 0.738 Kg/mt , horizontal Threetrack member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of
size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of
0.456 Kg/mt, vertical member of size40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5mm thick transparent bronze colour tinted 22.000 1583.95 Sqmt
float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc
18 Item No.18 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with
colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation 1.700 1175.56 Sqmt
19 Item No.19 Providing and fixing G.I shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges
with necessary screws. (i) Fully Panelled.M.S frames 12.5 cm x 7 cm. size including Steel work, welded in built up sections framed work
including cutting, hoisting, fixing in position Applying Painting two coats and priming coat over new steel and other metel surface and
Directed As per Engineer In Charge.
20 Item No.20 Providing and fixing Alluminium Door with Frame Size 100 x 50 mm and 28 mm thick Alluminium depress panel Single or
Double shutter.The Door And Frame insitu along with embeded steel pieces for stiffening & also taking hinges & fintures.The whole
Alluminium frame&single or double shutter is to be waterproof, weatherproof, termite proof & resistance to mild acid/alkali.Rates are to 5.000 5500.00 Each
be inclusive of S.S hinges with necessary screws & alluminum fixtures & fastenings & fartenersleeve.Colour and Shade approved by
Engineer-In-Charge.
21 Item No.21 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even
shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 563.000 40.59 Sqmt
22 Item No.22 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade
after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete
23 Item No.23 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give
an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 563.000 82.97 Sqmt
24 Item No.24 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection
2500.000 3.95 Litre
etc. complete on terrace
25 Item No.25 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes
and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white 5.000 1519.50 Each
Description of Item
Item No. Quantity Rate In figures Unit Amount
(with brief specification and reference to book of specifications)
26 Item No.26 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap
with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately) including providing
and fixing PVC flushing tank with a pair of C I or MS bracket with complete fitting such asFlushing cistern P.V.C. with fittings
Litre high level (A) vitreous China Pattern :(i) in white colour
27 Item No.27 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia.
Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(B) 30.000 106.50 Rmt
28 Item No.28 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. 5.000 158.86 Each
29 Item No.29 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength
not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with
frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth 5.000 2932.93 Each
with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for
single pipe line.
30 Item No.30 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm.
height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. 5.000 3445.18 Each
31 Item No.31 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as
directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of
all materials.
32 Item No.32 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as
directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of
all materials.
33 Item No.33 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 5.000 958.17 Each
34 Item No.34 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
35 Item No.35 Providing and laying jointing and pointing with stiff mixture of Cement Mortar 1:1 (1-Cement : 1-Fine sand) 150 mm internal
diameter salt glazed stoneware half round channels.
36 Item No.36 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI
marked 1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6A
Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick
PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class 40.000 387.00 pt
Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
37 Item No.37 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200
mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 5.000 1581.00 Each
Description of Item
Item No. Quantity Rate In figures Unit Amount
(with brief specification and reference to book of specifications)
38 Item No.38 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,CCT
Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below 12.000 751.00 Each
ranges shown.)(A) Tube Light with integral driver(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III
Total Rs.
Rupees Thirty Seven Lacs Fifty Six Thousand Six Hundread Seventeen rupees and Thirty Eight Paise Only
I / We / am/are willing to carry out the work at ________________________________% above/below percent (should be written in figure and words) of the estimated rates mentioned above. Amount of
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in
all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Himatnagar Irrigation Sub Dn. No. 1 Sabarkantha Irrigation Division
Himatnagar Himatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ 2.pdf
2026 Draft SBD Hathmati Canal Chowki (1).pdf
Tender Notice 08 of 2026-27.pdf
PA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].