REPAIR REPLACEMENT OF STREET LIGHT AND CONNECTED WORKS AT ORA AMBC TRG AREA SQNS AND ETTIKKULAM AREA UNDER GE MAINT EZHIMALA

Amount

Taking down the unserviceable LT UG cable of size of 6 Sqmm to 16 sqmm 4 core including removing electrical connection and keeping aside serviceable cable including removing cable protection cover etc complete all as specified and as directed.

Exacavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard/dense soil complete all as specified and as directed. Note:- The excavation has to be done manually only.

Returning and filling in including levelling watering and well ramming into layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point complete all as specified and as directed.

Supply and spreading riddle earth for cushioning and covering of the UG cable in trenches complete all as specified and as directed. Note:- Punned thickness shall be measured for payment purpose.

Supply and lay PCC unreinforced cable cover of size 250mm x 150mmx40mm, class LV type I flat for cable protection complete all as specified and as directed.

Relaying of PCC unreinforced LT cable cover of size 250mmx 150mmx40mm item obtained from ser no 1 complete all as specified and directed by Engr in charge.

Relaying cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall of size up to 16 sqmm 4 core complete all as specified and as directed.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated heavy duly galvanised steel strip armoured LT1100 volt grade with aluminium conductors of size 16 sqmm 4 core complete all as specified and as directed.

All as per item no.9 above but size of 10 sqmm 4 core complete all as specified and as directed.

M&L for mass filling in foundation/coping/wall with PCC 1:3:6 using 20 mm graded aggregate type C1 as per site requirement complete all as specified and directed by Engr in charge.

M&L for dismantling/removal of existing pole of post top lantern of any type from it's position/foundation after necessary exavation and earth work and refixing on site complete all as specified and as directed.

Cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 mtr and depth 0.7 mtr all as directed and making good the road/hard standing using premix bituminous macadam as required at site to match with the existing surface complete all as specified and as directed. NOTE:- Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.

Supply and fix in replacement of GI tubing light grade 50mm nominal dia in trench/road/pole for cable protection complete all as specified and as directed.

All as per item no. 14 herein above above but size of 40mm nominal dia complete all as specified and as directed.

Supply and fix in replacement of copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of digital time switch day programme three pole complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of contactor four pole 415 volt 63 Amp complete all as specified and directed by Engr in charge.

Supply and fix in replacement of post top, energy saving , enviormental friendly, spun aluminium landscape luminaire with high power LEDs as light source of 40 watt suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make:- CG Cat part no LPT0 40 CDL or equivalent in Havells/ Bajaj/Philips.

Supply and fix in replacement of bollard light fitting tulip/robust type with soft 360 light 10W with IP 65 protection complete all as specified and directed by Engr in charge. Make:- Crompton Cat part no.LBLTW-10-WW or equivalent in Havells/Philips.

Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings luminaire 60 watts,240V 50Hz pressure die cast aluminium coating ,heat resistant glass ,IP 66 rating,Nexus+ type complete all as specified and directed by Engr in charge. Make:- Crompton Cat part no LSTP-60-CDL or equivalent in Havells/Philips.

S&F in replacement of die cast aluminium IP 66 120W LED flood light luminaire complete all as specified and directed by Engr in charge. Make:- Crompton Model No LFLN-120-CDL/60 or equivalent in Philips/Havells

S&F in replacement of die cast aluminium IP 66 150W LED flood light luminaire complete all as specified and directed by Engr in charge. Make:- Crompton Model No LFLN-150-CDL/60 or equivalent in Philips/Havells

S&F in replacement of die cast aluminium IP 66 50 W LED flood light luminaire complete all as specified and directed by Engr in charge. Make:- Crompton Model No LFL-50-CDL or equivalent in Philips/Havells

Supply and fix in replacement of bracket made out of GI pipe medium grade, 50 mm dia, 90 cm long for fixing street light with and including clamps, nuts, bolts, washer etc complete accessories and applying two coats of oil painting over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Taking down the defective security light fittings/street light fittings of any type from 11/10/8.5 mtr swan neck type pole and refixing in same position after carrying out necessary minor repair work and cleaning the fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of weather proof street light junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts, the size of the box shall be of size not less than 205mmx255mmx112 mm,the box should have two cable entry complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of LED bulb B22 type 09 Watts in garden lights/ dome lights after removing the outer cover and refixing the same after replacement complete all as specified and directed by Engineer-in-Charge.

M&L for scrapping out faded / rusted old paint from street light using wire brush,emery paper and prepairing the surface for painting, applying one coat of alluminium paint on poles including cross arms, bolts and nuts, anticlimbing device etc and writing existing pole number with black paint over a yellow base complete all as specifed and directed by Engineer-in-Charge.

M&L for dismantling steel poles/struts of any size complete all as specifed and directed by Engineer-in-Charge.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 9 metres long complete all as specified and directed by Engineer-in-Charge.

devan enterprises

AR Traders

OM Enterprises

Sreekrupa Enterprises