Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | COCHIN | ERNAKULAM | KERALA | 682010 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹19.3 L+₹1.6 L (8.86%)Rejected-AOC | L2 | Rejected-AOC not being lowest |
Tender Value
₹21 L
EMD Value
₹42,000
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
MAINTENANCE OF INDIAN NAVAL MARITIME MUSEUM AT INS DRONACHARYA.
2022_MES_562049_1
8876/E8/GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
180 days
FORT KOCHI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE FORT KOCHI
₹42,000
Yes
23 Feb 2023
11 Nov 2022
22 Dec 2022
11 Nov 2022
20 Dec 2022
5 Dec 2022
Amount
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar .etc complete all as specified & directed.
Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 Type B1 1:2:4,(20mm gradded aggegate) complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified & directed.
S&F stainless steel grills/railings fixed to walls/floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified & directed.
M&L PCC 100 mm thick, 1:2:4 (Type B-1) using 20 mm graded crushed stone aggregate above sub base finished fair and even complete all as specified including necessary form work complete all as specified & directed.
M & L Screed bed or bedding layer of 20 mm thick in CM 1:6 for laying of floor tiles complete all as specified & directed.
M&L chequred Coloured pre-coated cement concrete tiles 30 cm x30 cm x 20 mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified & directed.
S&F In repair 1000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position all as specified in SSR Part-I.complete all as specified & directed.
Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store complete all as specified and directed.
Supply and fix in repair 20 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified & directed.
Taking down old U/s pipe GI/PVC/CPVC/UPVC from wall complete incl all connecting accessories complete all as specified & directed.
S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11 fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey ,complete all as specified & directed.
S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11 fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey complete all as specified & directed.
S&F in repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm.complete all as specified & directed.
S & F in repair 15mm angular stop cockas per Cat No. COP-057PM Jaquar as in repairs complete all as specified & directed.
S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts.complete all as specified & directed.
S & F in repair CP grating 100 mm dia complete all as specified & directed.
S&F in repair Plastic water closet seat cover (any Type) black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.
Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fix in repair Health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings upto 11 floors in complete all as specified and as directed.
S&F in repairs Stainless steel soap dish fixed with SS screws .
S & F in repair 32 mm brass chromium plated bottle traps for washbasins with inlet and outlet screwed for pipe or copnnections including necessary packing,union and cap and fixed complete all as specified
S&F in repair gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm complete all as specified & directed.
Cutting chases pinning in bricks walls making good to facing where required and pointing in cm 1:3 to ends or edges of cills lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting n.exc 10cm in girth complete all as specified & directed.
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed.
M&L for rendering 15 mm thick in two coats (10 mm thick in cement mortar 1:6 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.complete all as specified & directed. (Note- water proofing compound shall be measured and paid seperately) .
Supply only liquid water proofing admixture complete all as specified & directed.
M&L for rendering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement etc. complete all as specified and directed.
M&L Prepration of old surfaces of ceiling by complete removal of existing treatement and applying two coats of distemper oil emulsion on old surfaces ceiling over a coat of primer etc. complete all as specified and directed.
M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent or equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing , support complete all as specified & directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed.
M&L for preparation of old plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified & directed.
M&L for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed.
M&L for preparation of old treated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M&L for preparation of old treated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
Taking down existing water proofing treatment of any thickness from the roof including cement mortar bedding , PCC tiles,padding concrete if any, upto the RCC slab, removing debris off the premises and cleaning the roof etc. complete all as specified and directed.
Cutting the V grooves on the terrace slab where ever cracks are observed and fill the grooves with Fosrocs heavy duty non shrink grout Convextra GP2 , coving all the 90 degree angles, slab/wall junctions with Conbextra GP2 all as per manufacturer's instruction etc. complete all as specified and directed.
M&L providing a levelling course of cement concrete type B-0, 1:2:4, using 12.50 mm stone aggregate, 25 mm thick maintains a slope towards the drain water pipes by adding a water proof admixture @ 250 ml per bag of cement etc. complete all as specified and directed. Note :-Admixture shall be measured and paid seperately.
M&L for rendering with CM 1:3, 10 mm thick mixed with water proofing admixture of Fosroc/Pidilite or equivalent , etc. complete all as specified and directed. Note :-Admixture shall be measured and paid seperately.
M&L for applying oil based bitumen primer @ 0.25 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4kg/sqm having softening point not less than 140 degrees C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torch application including min 10 cm side over lap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over membrane @ 1.2 kg/sqm and finishing the surface with solar reflective bituminous aluminium paint @ 10 Kg /Sqm all as specified etc. complete all as specified and directed.
M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removing the debris with in a lido of 100 meters etc. complete all as specified and directed.
M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge.
M&L for plastering with Nitobond SBR (Styrene butadin polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as specified and directed.
M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd.) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L 15 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles complete all as specified and directed.
Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces , finished fair and even .for receiving wall tiles complete all as specified and directed.
M&L Joint free non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified and directed.
M & L for vitrified ceramic tiles light shade10mm thick (square or rectangular) polished area of each tile exc 0.42 sqm and not exc. 1.00 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete all as specified and directed by Engineer - in - Charge.
M&L for glazed ceramic tiles,coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete. complete all as specified and directed.
Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.
Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
Material and labour for point wiring with copper conductor, single core, multistranded, 1100 volt grade, conforming to IS-694 PVC insulated unsheathed FRLS cables of size 1.5 Sq.mm 2 run and one run of 1.5 Sq.mm for earth continuity to be drawn in PVC casing & capping not less than 25 mm width with terminal/runken box made of GI sheet 1.2mm thick along with modular base plate and frame switch including all necessary wall cutting for sinking's of boxes and making good disturbed surface to existing walls including colour washing etc. for One light point controlled by one switch complete all as specified and directed.
Ditto- all as per item No 56 here in before but with one Exhaust Fan controlled by one switch complete all as specified and directed.
Ditto- all as per item No 56 here in before but with One fan point by one switch and regulator complete all as specified and directed.
Ditto- all as per item No 56 here in before but with One 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed.
Ditto- all as per item No 56 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed.
Supply and fix in repair Modular switch 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
Supply and fix in repair Modular switch 16 Amp, single pole, one way, 230 Volt complete all as specified & directed.
Supply and fix in repair Modular bell push flush, 06 Amp, Volt complete all as specified & directed
S & F for in repair Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.
Supply and fix in repair Modular socket outlet 2 in 1, 3 pin, 06 Amp flush type, 230 volt, complete all as specified and directed
Supply and fix in repair modular socket outlet multi purpose 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, 230 volt, complete all as specified & directed.
Supply and fix in repair ding dong bell, AC, 230 volts, single pole complete all as specified & directed
S & F in repair Modular fan regulator step type AC, 120W two module complete all as specified & directed
Taking down carefully ceiling fan of any sweep Each complete with all accessories, dismantling blades and kept in safe custody including painting complete with rewinding using synthetic enamel copper wire and paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging and connecting up with 3 core copper flexible cable of size 1.5 Sq mm from ceiling rose to fan complete all as specified & directed.
Supply and fix in replacement of surface mounted LED tube light fitting four feet long, 22 Watt with IP 20 protection comprises of aluminium extruded channel, extruded aluminium body, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells Cat part No LUMILINEPLUSBS22WLED865SPCSS or its equivalent makes in Appendix 'C'
S & F for lamp holder , PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- 4 runs of 6 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.
M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. 4 runs of 10 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.
M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 4 sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- 4 runs of 4 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.
S & F for in repair energy efficient exhaust fan of 250 mm sweep made of Plastic body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall complete all as specified and directed.
S & F in repair for sheet metal enclosure MCB DB TPN 8 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.
S & F in repair for LED fitting, 1 x 9/10 watt bulk head luminaries, with lamp holders, etc complete with all accessories and including connecting up with twin core copper conductor cable with suitable size of 230 V, 50 Hz complete all as specified and directed.
S & F in repair of track mounded LED spot light 15 Watt with modern design compact size with high power cob led provided focused light etc complete with all accessories and including connecting up with twin core copper conductor cable with suitable size of 230 V, 50 Hz complete all as specified and directed.
S & F in repair of sheet metal enclosure MCB DB SPN 8 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.
S & F in repair for MCB Single pole and neutral rated capacity 40Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
S & F in repair for MCB triple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
Supply and fix in repair of MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete all as specified & directed.
S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed
M&L Galvanised Steel Tubing Pipe 80mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
Supply and fixing in repair of TV plug Co-axial socket modular type including necessary cable connection calling bell with volume control dimmers type .Make Crabtree/ Anchor Roma complete all as specified and as directed.
Supply and fixing in repair of two pin telephone socket modular type including modular plate and necessary cable connection .Make Crabtree/ Anchor Roma complete all as specified and as directed.
Supply and fix in repair of Connected LED Pendant luminaries 20W with efficient optics ensuring perfectly uniform illumination, Interconnectable luminaries for aesthetically appealing downlight application. Suspension of 1.5 mtr (02 nos) optimised . incl electric connection complete all as specified Make Bajaj Cat part No BPTX 20W LED 4F WW or its equivalent makes in Appendix 'C' .
Supply laying and testing in repair of cable XLPE insulated screened PVC bedded galvanised iron strip or wire armoured electric cables (heavy duty) 1100 volts grade with standards Al. conductor of size 16 Sq.mm 4 core complete all as specified and as directed.
Supply and fixing in repair of round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and as directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in Set ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel Gl protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part 2009 and connected to main switch board / Main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, Gl pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.
S & F LED in repair of street light fittings 45 Watt energy saving LED street light made up of pressure die cast housing with toughened glass and individual high power LED as secondary optics, IP66 protection and impact resistance of IK07 including necessary electrical connection from overhead conductor to light fittings including dismantling/taking out old unserviceable street light fittings of any description and removing of dismantled material from work site complete all as specified and as directed.
S & F in repair of Heritage post top lantern LED IP 65 Rated 230V 20 watts warm white incl all necessary accessories for fixing to pole all as specified and directed.Make: Crompton cat part No. LPTH-20-CDL or its equivalent makes in Appendix 'C' complete all as specified and as directed.
Taking up carefully defective LT UG cable of any size disconnecting electric supply from both ends, tracing fault and setting asid complete all as specified and as directed.
Taking up carefully defective switch /socket /regulator/bell/bell push/holder etc any size complete all as specified and as directed.
M/s S & S Enterprises/ Suresh Shivasankarapillai
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .