Construction of Common Facility Centre (CFC) Building for Sanjeevarayanakote Phase-I Industrial Area, Ballari Taluk & District.

Construction of Common Facility Centre (CFC) Building for Sanjeevarayanakote Phase-I Industrial Area, Ballari Taluk & District.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with: M-Sand complete with all lead a...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Plain cement concrete 1:4:8 (M5) Using 40mm and down size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cr...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Damp proof course 50mm thick with 1:2:4 cement concrete Nominal mix, using 12mm hard broken stone aggregate including cost and conveyance of all materials, seigniorage charges, all labour charges, all...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever require smooth rendering, providing and removing scaffolding, includ...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever require smooth rendering, providing and removing scaffolding, includ...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever require smooth rendering, providing and removing scaffolding, includ...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever require smooth rendering, providing and removing scaffolding, includ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appr...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing Salwood frames of doors and other frames, wrought, framed or ssembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, ...

Providing Salwood frames of doors and other frames, wrought, framed or ssembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, ...

Providing Salwood frames of doors and other frames, wrought, framed or ssembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, ...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (b...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (b...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (b...

Supply, Installation, Testing and Commissioning of Electric Traction Passenger Lift of makes: Kone/Otis/Schindler/Mitsubishi/Johnson with Rated capacity :- 13 Passenger/884Kg Floors :- G+2 floor (3Sto...

Horticulture operations including earthfilling, grassing, tree plantation/shrubs and plotted plants etc complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing roof top rainwter filter/ Slit collection chamber having Two stages of filtration i.e., FL 500, Non-Clogging filter elemnt 1, polymeric filter element 1, polymeric filter element 2, having ...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap Ground Floor complete with all lead and lift etc, as per specification and direction of Engineer in c...

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap First Floor complete with all lead and lift etc, as per specification and direction of Engineer in ch...

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap Second Floor complete with all lead and lift etc, as per specification and direction of Engineer in c...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g Ground Floor complete with all lead a...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g First Floor complete with all lead an...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g Second Floor complete with all lead ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 4...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 4...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 4...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Ground Floor complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 First Floor complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 second Floor complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot...

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot...

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Ground floor complete with all lead and lift etc, as per specificati...

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. First floor complete with all lead and lift etc, as per specificatio...

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Second floor complete with all lead and lift etc, as per specificati...

Supply and fixing of SWR PVC Cowl vents110mm Dia complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing and fixing S.W Gully trap of P type 150x100 mm complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self-cleansing design with C.I screed down or hinged grating including the co...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

Design, Manufacture, supply, Installing, testing & commissioning of submersible pump with suitable motor and rpm for following duty points as specified below conforming to IS

a) Duty point discharg

Compund Wall: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadi...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement

: 4 coarse sand) including cost of all materials, labour, sc...

Providing and laying in position Reinforced cement concrete M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Foundation works. The granite/trap/basalt crushed graded c...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Road & Drain: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up

to 300 mm, removal of stumps of trees cut earlier and disposal of ...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanic...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. complete with all lead and lift etc, as per specifica...

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...

Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...

Power Supply & Electrification for Admin Building :Supply and fixing of 25 mm dia, 2.2 mm thick PVC conduit pipe ISI Mark concealed in wall/run on surface above false ceiling if necessary with all re...

Supply and fixing of 32 mm dia, 2.1 mm thick PVC conduit pipe ISI Mark concealed in wall/run on surface above false ceiling if necessary with all required accessories including chisiling the wall wher...

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

Supply and fixing of 1No 3pin 6A modular socket with 6A modular switch mounted on GI metallic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all mat...

Supply and fixing of 16A/6A 1 way Combi Modular Socket with shutter with 16A modular switch mounted on GI metallic box with appropriate modular front plate as directed by the Dept. including conve...

Supply and laying of 2/4 runs of the following FRLS PVC insulated flexible copper wire (Phase, Neutral) with 1 run of suitable FRLS PVC insulated flexible copper wire as earthing in existing PVC condu...

Supply and laying of 2/4 runs of the following FRLS PVC insulated flexible copper wire (Phase, Neutral) with 1 run of suitable FRLS PVC insulated flexible copper wire as earthing in existing PVC condu...

Supply and laying of the following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part-I) including laying in existing cable trench as per specificat...

Supply and laying of the following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part-I) including laying in existing cable trench as per specificat...

Supply and laying of the following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part-I) including laying in existing cable trench as per specificat...

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tap...

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tap...

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tap...

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc for Cables upto 16Sqmm size. Copper lugs complete with...

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.150x50mmx2mm complete with all lead and lift e...

Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3...

Supply and fixing of 20A Plug and Socket in SS enclosure with 20A SP MCB including internal connection and labour charges for surface / flush mounting etc., complete. (Legrand(Ekinox 3) / Schneider-A9...

Supplying of PVC Batten with integrated LED tube 22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Pow...

Supplying of recess mounting non integrated type LED down light 12W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with ...

Supplying of recess mounting non integral type LED 36W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CR...

Supplying of recess mounting non integral type LED 18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CR...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...

Supplying and fixing of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 300 MM Exhaust Fan . complete with all lead and lift etc, as per specifi...

Main LT Panel Supply, fabrication, installation, testing and commissioning of free standing floor mounted dust and vermin proof compartmentalized cubicle type front operated MV switchboard Panel made ...

Supply, erection, testing and commissioning of 250KVA 5Star rated Aluminium/Copper wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil...

Supply, installation, testing and commissioning ofCompact RMU (VCB/SF6 Type) as per IEC-62271The DAS RMUs shall have the following in addition to the Standards:DC motors, Numerical Relays, Multi-funct...

Supplying and laying of high tension 11KV 3C X 95 Sq.mm cable, Dry Curing & Dry Cooling with true triple extrusion,simultaneously through a single common head, 3 core under ground XLPE (E) cable havin...

Supply & Making of 11KV 3C X 95 Sq.mm (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - Straight...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required50 mm x 6mm Copper strip complete with all lead and lift etc, as per specification and ...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required50 mm x 6mm GI strip complete with all lead and lift etc, as per specification and dire...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required 25mm x 3mm Copper strip complete with all lead and lift etc, as per specification and ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pitThe pit should ...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...

Supply and Transportation of following dia double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. [HDPE Pipe Make: Duraline (Duraguard)/ Percision or equivalent]O...

Supply and installation of 2TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed inverter compressor with air cooled conde...

Supplying and installation 25 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled ...

Supplying, installing, testing and commissioning of 200KVA Diesel Generator set.Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set...

Supply, Erection, testing and commissioning of AMF panel suitable for 200 KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, al...

Fire Fighting System Supplying, Installing testing & commissioning electrically driven jockey pump of capacity 180.0 Lmpm at 75.0m head with all the necessary accessories viz. Pre...

Supply, erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly c...

Supplying, Installing testing and commissioning of fire hydrant engine driven end suction pump capable of delivering 2850 Lpm@ 90.0m head bronze impeller coupled pump to water coiled diesel engine of ...

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, ...

Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, ...

Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, ...

Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, ...

supply , erection , testing and commissioning of Hinged Cabinet Door Shutter and Frame of size (approx) 900mmX1200mmX150mm with hinged frame fabricated frame and shall ...

Supply , erection, testing and commission of yard hydrant consisting of the following . The quoted rate shall include the cost of bore making in the cojncrete of roof slab, retai...

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...

Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machine...

Supplying Installing, testing and commissioning of 100mm dia 2 way Fire

brigade inlet connection of 2 nos. 63 mm dia. including cost of materials,

labour, usage charges of machinery complete as per sp...

Supply, Erection, Testing and commissioning of C.I.Gate valves as per IS:14846 (PN 16) Rating, for suction side of the pumps) and rising spindle type with flanges, bolts, nuts, washers...

Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.200 mm dia supply and fixing complete with all lead and lift ...

Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.100 mm dia supply and fixing complete with all lead and lift ...

Supply , erection, testing and commissioning of slim seal type butterfly valves with shperoidal graphite iron disc (SG iron), with nitrile rubber seal and tested to 10 kg/ Sq.cm including a ...

Supply , erection, testing and commissioning of slim seal type butterfly valves with shperoidal graphite iron disc (SG iron), with nitrile rubber seal and tested to 10 kg/ Sq.cm including a ...

Supply , erection, testing and commissioning of slim seal type butterfly valves with shperoidal graphite iron disc (SG iron), with nitrile rubber seal and tested to 10 kg/ Sq.cm including a ...

Supplying, fixing, testing and commissioning of Gun metal chrome

finished Ball valves with fittings of screwed end type.32mm dia complete with all lead and lift etc, as per specificat...

Supplying, fixing, testing and commissioning of Gun metal chrome

finished Ball valves with fittings of screwed end type.25mm dia complete with all lead and lift etc, as per specifica...

Supply, erection, testing and commissioning of slim seal flap type Non- return valves with CI body & Cast steel disc and tested to 10 kg / sq.cm including a set of suitable GI flange...

Supply, erection, testing and commissioning of slim seal flap type Non- return valves with CI body & Cast steel disc and tested to 10 kg / sq.cm including a set of suitable GI flange...

Supply, erection, testing and commissioning of slim seal flap type Non- return valves with CI body & Cast steel disc and tested to 10 kg / sq.cm including a set of suitable GI flange...

Supply, erection, testing and commissioning of slim seal flap type Non- return valves with CI body & Cast steel disc and tested to 10 kg / sq.cm including a set of suitable GI flange...

Earthwork excavation in all types of soils for laying MS pipes for yard hydrant & 4way FBI piping to required depth. The rate shall include back filling and consolidating etc. complete com...

Supply, erection, testing and commissioning of air cushion tank of 300mm diameter and 1000mm height with drain connection. The rate shall be inclusive of asesserires 25mm air release valve...

Supply and fixing of perforated sheet cable tray. Rate shall include necessary angles, iron suspension and anchor fasteners etc complete. Maximum height of suspension shall not e...

Supply, laying and connecting following size of earth strips 25 x 3mm GI Strip complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply, laying and connecting following size of earth strips50 x 6mm GI Strip complete with all lead and lift etc, as per specification and direction of Engineer in charge

Providing, laying, jointing and testing socketed and spigotted RCC Pipes (NP2 class) conforming to IS 458 jointed with cement mortan and laid to correct levels below ground in trenches...

Supplying, installing, testing and commissioning of water curtain nozzle of 15mm screwed end connection with suitable K factor-

23.The curtain nozzle shall be UL Listed, complete with ...

Supplying, Installing, testing and commissioning Motorised butterfly valves as per BS 5155 slim seal standard type with required flanges, nuts, bolts etc. complete. (For water curtain noz...

Supplying, Installing, testing and commissioning Motorised butterfly valves as per BS 5155 slim seal standard type with required flanges, nuts, bolts etc. complete. (For water curtain noz...

Supplying, Installing, testing and commissioning Motorised butterfly valves as per BS 5155 slim seal standard type with required flanges, nuts, bolts etc. complete. (For water curtain noz...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Sprinkler System: Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') G I confirming to as per IS1239 Such as Tees elbows check nuts uni...

Supply, errection, testing and comissioning of slim seal type butterfly valves with spheroidal graphite iron disc (SG Iron) with nitrile rubber seal and tested to 10kg/sqcm. Including a set...

Supply, errection, testing and comissioning of slim seal type butterfly valves with spheroidal graphite iron disc (SG Iron) with nitrile rubber seal and tested to 10kg/sqcm. Including a set...

Supply, errection, testing and comissioning of slim seal type butterfly valves with spheroidal graphite iron disc (SG Iron) with nitrile rubber seal and tested to 10kg/sqcm. Including a set...

Supplying Installing, testing and commissioning of approved make 15mm dia sprinkler bulb pendent/wall mounted type designed to operate 68 degrees centegrad FIRE complete (Colour code of bul...

Supply, erection, testing and commissioning of hydraulically operated sprinkler alaram unit connected to sprinkler system/ Hydrant system (150mm dia) in the basement floor compr...

Supplying, installing, testing and commissioning flow switch on each sprinkler distribution header and shall be connected to fire alarm panel

through cable. Cable shall be measu...

Supplying, laying, testing & commissioning of XLPE insulated PVC sheathed, steel armoured, aluminium/cu conductor, 1100V grade power cables from each flow switch to the m...

Supply and installation in position, testing and commissioning 6kg Fir e Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 K...

Supply and installation of 2kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter 108MM, Di...

Supplying of four bucket stand alongwith buckets. Complete complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply and install in position approved make Foam type Fire Extinguisher of 9lit capacity, fitted with discharge control valve (squeeze grip type), inside co2 gas cartridge of 60gms as per...

Supply and installation of 9 Ltr Fire Extinugisher Aqueous FilmForming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Di...

Providing, installing and fixing in position the signages as mentioned

below with necessary drills, screws, etc., complete. a) Sign"IN CASE OF FIRE USE STAIRS UNLESS INSTRUCTED OTHERWISE"Let...

At each stair enclosure on every floor, in accordance with the numerals shall be bold type and atleast 7.5cm high. The numerals and background

shall be in contrasting colors complete with all lead an...

c) Stair and elevator identification sign shall be posted from, maintained at each landing and on the side of stairway door from which acess is to be made. The lettering on sign shall be atleast ...

Providing, installing and fixing in position the signages as mentioned below with necessary drills, screws etc., complete "FIRE ORDER IN CASE OF FIRE OF SIZE 2"X 4" & LETTERING HEIG...

Action by Security/Reception upon reception of information through fire alaram or fire detectors or by using Public address system complete with all lead and lift etc, as per specification and dir...

Convential type fire alarm system: Supplying Installation testing and Commissiong of Micro process base Fire alram Control panel having power regulation Circuit, which conner to 230 AC to @V.D.C. Ind...

Supplying Installing, testing and commissioning of Resettable type Manual

Call point . works on 24V DC LED indicator with glass Fronted. Fire

Symbol .The red Manual Call Point is approved to EN54-11 s...

Supplying Installing, testing and commissioning of electronic Hooter, it

conists of electronic circuit to give dual Fire alaram sound with works. 24V

DC with speaker all encased in suitable in MS 16 g...

Supplying and drawing Flexible Multicore Cable manufactured with

electrolytic grade flexible copper with low conductor confirming to

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

SITC of 7AM-12 V Battery for fire alaram system complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying Installing, testing and commissioning of Public address system

(Two way comminication type) as per requirement of Fire Force authority

and which Generally comprise of Supplying Installing, t...

Providing and Fixing Fire force board size of 3'x2' made out to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour, usage charg...

P.A.System amplifier 250W RM S out put with complete wiring and

controls accessable form front complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying, installing, testing and commissioning 40 strand twin core control cables of PVC insulated copper conductor, Confirming to IS 1554, as per specification. complete with all ...