Balance work of Science Block in Government Senior Secondary School at Bhullana District Kangra (HP)

Excavation in foundation trenches etcetera in earth work lift upto 1.50mtr. Stacking the excavated soil not more than 3mtr. Clear form the edge of the excavation and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and warering and ten disposing of all surplus excavated earth as directed with in a lead of 20mtrs pick jumper work. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5cm. So as to give fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr and removal of the same for insitu-reinforced concrete and plain concrete work in:-Flat surfaces such as soffits of suspended floors, roofs, landing and the like. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5cm. So as to give fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr and removal of the same for insitu-reinforced concrete and plain concrete work in:-Vertical surfaces such as walls (any thickness) partitions and the like I/c attached pillasters buttress, plinth and string courses and the like. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) . as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level . as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing M S grills of required pattern in wooden frames of windows etc. with MS flats squares or round bars with round headed bolts and nuts or wire screws. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing 19 mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters, edges sealed with 2 mm thick PVC edge bending tape of approved brand, including ISI marked nickel plated bright finished M.S. piano hinges conforming to IS:3818 with necessary screws, complete. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing 19 mm thick water proof commercial board of shelves and shutters for cup board with hard wood edging to be finished with mica lamination complete . as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16mm as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10mm as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."