KyIP-ACP(NP )-2020 -21 -Urgent repair of Canal shutter at Moorikkara distributary,Moottoli FB, Koodathumpoyil FB, Makkada sub distributary and Palath FB-Mechanical work

Amount

Dismantling the shutter and hoist unit ,chipping concreting the groove

od31827/2020_2021/MH : od31525/2020_2021/MH :Dismantling of the Canal Shutter ( up to 2 Tonne weight ) /Hoist unit /Embedded parts etc.of the same and stacking at distance of 100m including hire of machinery labour etc. complete as direct by the departmental officer at the site (weight of unserviceable shutters and embedded parts may be calculated as 60% unservicable hoisting unit as 80%)

15.1 : Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer - in- Charges.

4.3.3 : Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.4.1 : Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size)

Supply , Fabrication of MS material for Embeded parts , cost includes cost of material

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od34978/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutter (up to 2 tonnes w.t)and accessories as per approved specifications and drawing and directions of departmental officer at siteincluding cost of labour,machinary,all leads and lifts,incidental and handling charges etc complete butexcluding cost of material already supplied

Supply of materials, fabrication,painting and erection of MS shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od34979/2020_2021/MH : Fabrication and supply of Structural steel canal shutter(up to 2 tonnes w.t) / Hoistbridge /platform and accessories etc. for the same as per approved specifications, drawings and directionsof deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling chargesetc complete but excluding cost of material already supplied

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Erection of the shutters safely in the grooves , assembling and aligning

od34980/2020_2021/MH : Erection of the Canal shutter (Up to 2 tonnes weight)/Hoist Bridge / Platformincluding handrail,ladder etc same including. Alignment correcting and setting complete including cost of allmachinery, labour all incidental and conveyance ,lead and lift charges etc complete but excluding cost ofmaterial already supplied

Supplying and fixing of flat type rubber seal at the bottom side and vertcal sideof the shutter

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

Supply of materials, fabrication,painting and erection of hoisting bridge and hoist units, screw rod for shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od31833/2020_2021/MH : Supply of MS Bolts and Nuts

od38071/2020_2021/MH : Fabrication and supply of Structural steel canal shutter(up to 2 tonnes w.t) /Hoistbridge /platform and accessories etc. for the same as per approved specifications, drawings anddirectionsof deptl officer at site including cost of labour, machinery, all leads and lifts, incidental andhandling chargesetc complete but excluding cost of material already supplied

od34982/2020_2021/MH : Erection of the Canal shutter (Up to 2 tonnes weight)/Hoist Bridge / Platformincluding handrail,ladder etc same including. Alignment correcting and setting complete including cost of allmachinery, labour all incidental and conveyance ,lead and lift charges etc complete but excluding cost ofmaterial already supplied

Painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

:Providing base and nut arrangement ,Gear box, operating handle for hoisting shutter

od31829/2020_2021/MH : :Providing base and nut arrangement for hoisting the shutter including cost of allmaterials labour etc complete

od34972/2020_2021/MH : operating handle for base and nut , cost include cost of mateials ,making, suply,conveyance, labour etc

od34986/2020_2021/MH : Providing of worm and pinnion having a lifting speed of around 5.00cm/min for handoperation including cost of all materails, labour, hire charges and conveyanceFor one complete set

Supply of EN -8 shaft for Screw rod

od34974/2020_2021/MH : :Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having onenumber of EN-8 Screw shaft having a lifting spead of around 5.00 cm/min for 24rpmof hand operationincluding cost of all material,labour,hire charges and conveyance

Bidder Name

K.U. ULAHANNAN