Repair and renovation of E I Work of Kazi Nazrul Islam Home Berhampore in the district of Murshidabad

Amount

Dismentling some existing switch board, power DB, SPN DB, Distribution Point wiring, cable, wire, etc. and mending good damages to original finish.

Supply & Fixing 415 V 100 A TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts, bolts etc. incl. S & F 3 nos. DIN type HRC fuse and necy. Connection.

S/F 415 v, 16-32 A/way, 6 way vertical TPN MCB DB with SS enclosure double door with IP- 42/43 protection with provision for 4 pole MCB as incomer & TPMCB as outgoing ( 'C' curve, 10 KA ) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl.interconnection with suitable size of cu wire & neutral link & provision for earthing attachment. ( make - Legrand) Comprising of the following i) 100 A, 4 Pole MCCB - I No . ii) 63 A TP MCB - 4 Nos. iii) 32 A TP MCB - 2 No. iv)cable entry box - 2 nos

S & F 415V, 16-32A per way, 4 way HTPN MCB DB with SS enclosure double door with IP- 42/43 protection with 63 amp 4 Pole Isolator as incomer & 12 Nos. SPMCB (16A to 32A 'C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of Cu. wire & neutral link & provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

S & F 250V, 6-10A per way, 2 + 10 way SPN MCB DB with SS enclouser double door with IP- 42/43 protection with 40A DP Isolator as incomer & 10 Nos. SP MCB's ('C' Curve, 10kA) as otgoing concealed in wall after cutting the wall and mending the good damages to original finish incl. Inter connection with suitable size of Cu. wire and neutral link and provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

S &Delivery of the following size 1.1 kv.gr. 4 core 70 sq.mm. PVC/A Al. cable as below (Havells/Gloston)

a) Surface on wall as per GS.

b) In UG Trench

Finishing the end of Following XLPE/PVC armoured cable by crimping method incl. S &F solder less socket tapes anticorrosive paste and jointing materials

a) 4 core 70 Sqmm

S & F compression type gland complete with brass gland, brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below

a) 4 core 70 Sqmm

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for 16 A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175 x 100 x 65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

a) Average run 10 mtr

b) Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in PVC Polythene pipe concealed in wall with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

a) On Board

b) Average run 7.5 mtrs. (Separate Plug )

S & F 250 volt 5 amps 2 nos plug socket with 2 nos piano key type switch (Anchor) on sheet metal box ( 7'' x 4 '') embded in wall incl making necessary connection as required as per GS.

S/F 250v, 5 pin 15 A flush type plug socket with 15A piano key switch (Anchore) on sheet metal box (16 SWG) with bakelite top cover ( Power point)

S/F 250 x 200 x 65 mm size MS composit board comprising of 1 no 250v, 15 A ,5 pin flush type plug socket with switch & 3 nos 250v 5 A 5 pin flush type socket with switch ( All Anchor) 1 no indicator & 1 No fuse concealed in wall incl. necy. Connection as to GS.

Supply & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unsheathed Cu. Wire (approved make) in polythene pipe embeded in wall complete with all accessories incl. cutting the channel and mending good the damages.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii)2 x 6 sq.mm+1 x 4 sq.mm

iii) 4 x 16 sq.mm + 2 x10 sq.mm.

Finishing the end of the Wire by crimping method as to G.S.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 6 sqmm. + 1 x 4 sq.mm.

iii) 4 x 16 sq.mm + 2 x10 sq.mm.

S & F of A.C/DC. superior type call bell on T.W. Board incl.S & F T.W. Board (Make: Anchor - 8320).

Supply & delivery 250 volt. 4 ft. long 20 watt Single LED Tube Light fittings complete with all accessories incl. LED. Tube (PHILIPS MAKE)TMC 501 PI xT with Master LED Tube 18 W 865T81

Supply & delivery 250 volt. 4 ft. long 20 watt double LED Tube Light fittings complete with all accessories incl.2 nos LED. Tube (PHILIPS make)TMC 501 P2xT with Master LED Tube 18 W 865T81

Fixing only single/twin LED Light fittings complete with all accesaries directly on wall or ceiling with M.S clamp As required as per GS.(some old fittings will install)

Supply & fixing of 9 watt L.E.D Lamp on existing battern holder.(Phlips make) (some old lamb aprox. 15nos. will install)

additional 2 Nos. 20mm dia G.I. Conduit (14 SWG) supports and necessary PVC insulated wire and painting etc. as reqd. (a) 2 x 24/0.20 mm flexible copper wire of 1.10 Mtr. Length

Supply & delivery of 1200mm sweep AC ceiling fan (USHA (Stiker)/Crompton(AURA)) without regulator with all accessories

S & F 250 V, 280 watt Step type electronic fan regulator (Anchor) on existing board after cutting the bakelite cover & necessary connection.

Thorough checking the A.C. ceiling fan including split pin, rubber bobbin insulator, jam nut, lock nut, set screw etc. including cleaning and washing the fan body, blade, canopy, iron net guard etc. by super quality detergent powder and water as per direction of EIC

Fixing only A.C. Ceiling Fan complete with blades, canopy, fork etc. incl. S & F connection or wire by 2 x 1.5 sq. mm. PVC insulated Cu. Wire (approved make) for down rod upto 30 cm. incl. painting and necy connection as to G.S.(some old fan will install after servacing)

S&Fixing 300mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

S&Fixing 450 mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

S&Fixing 300 mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

S & F 18" Wall Bracket Fan (Wall Tornado)

Earthing the installation by 2' (50 mm) G.I. pipe as per G.S.

Loop earthing by No. 4 GI wire from busbar to equipment as to G.S. ( Earth Busbar )

Compound Illumunation work S/F of 80mm dia 1.5 mtr long Mini G.I Pipe Pole (Midium Gauge)incl. painting & S/F base plate in necy holes as per G.S

Providing CC (6:3:1) muffing 600x600x760) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with 250x250x100) mm 16 SWG GI Loop Box having 4way connector 15A fuse unit etc.accessories.

S/F 250 Volt 72 watt LED Fittings complete (Philips make) Cat No. BRP410 LED 72 CW HE MR FG S2 PSU GR

Supply , Erection and Painting of ST Pole of length upto 8.5 mtrs. Long with 2 coat of Al. Paints over one coat of R.O. primer after cleaning the pole surface by sand / emary paper etc. for receiving the fresh coat of paint.

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

S/ Erection of 1.5mtr long 40mm dia detacheble Double Arm Bracket on 80mm dia pole with all require accessories as per direction of E.I.C.

S/ Erection of 1.5mtr long 40mm dia detacheble single Arm Bracket pole with all require accessories as per direction of E.I.C.

S/F medium gauge GI pipe (ISI- M) for PVC/A AI cable protection as to GS. (50mm. Dia)

S &Delivery of the following size 1.1 kv.gr. 2 core 10 sq.mm. PVC/A Al. cable as below (Havells/Gloston)

a) Surface on wall as per GS.

b) In UG Trench

Finishing the end of Following XLPE/PVC armoured cable by crimping method incl. S &F solder less socket tapes anticorrosive paste and jointing materials

a) 2 core 10 Sqmm (for compound light)

S & F compression type gland complete with brass gland, brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below

a) 2 core 10 Sqmm (for compound light)

S & Laying of 2 core 6 sq.mm. PVC/A cable in Embeded in wall for compound light. For rooftop light

S & F compression type cable gland as per G.S. & Finishing the end of the cable by crimping method as to G.S.

i) 2 core 6 sq. mm.

S&drawing 1,1kv grade single core stranded FR PVC insulated unshehed cu wire (approved make) in polythene pipe embedded in wall complete with all accessories incl.

2 x 1.5 sqmm+1 x 1.5sqmm

Supply and fixing automatic control box made by 16SWG CR sheet of approximate 450 x 600 x 150 mm fixed by flushed on wall for control of LED light with following accessories. A) 32A TP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) ML-2 Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........3 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

Supply & Delivery the following item The Thermal Imager Scanner Model No - Fluke - VT02

Terms and Conditions: 1. In site has Some old existing LED Tube Light and Lamp those are good condition will be stored care fully during Execution of Work for reuse as per EIC. 2. In site has Some Some old Existing fan will be repaired during execution of work and stored care fully for reuse as per EIC.

3. The Agency Must procure the materials from the Manufacturer/OEM of from their authorised sales channel so that the standred warranty/ support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. 4. Documents that authenticates such procurement from the Manufacturer/OEM of from their authorized sales channel and standrad warrenty/ support should be sent from the e-mail of the Manufacturer/OEM/ authorized sales channel to the e-mail of Engineer-in-charge and Hard Copy of it to be submitted during excution of work / submission of bill. 5. If any refurbished material is supplied and installed, panel action will be takenas per existing rules.

M/S TAPAS SINGHA ROY

JOGMAYA ENGINEERING

PRASAD ENTERPRISE