WBPWD/EE/KND/NIQ-05/2019-2020

Amount

Workstation for Staff Recta module model Wish , Tile configuration for all panels, above worktop : Combination of fabric magnatic board with white board on worktop side, rest of all metal tile will be below the worktop level, There will be raceway below the worktop provition for mounting switches...... Like Godrej make

Wrokstation Chair for Staff model Bravo PCH - 9U02R, The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.BACK SIZE:47.5 cm. (W) x 58.0cm. (H).SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The mechanism is designed with the following features:3600 revolving type.Upright position locking.Tilt tension adjustment.Seat/back tilting ratio of 1:3 (60 seat tilt/180 back tilt).The pneumatic height adjustment has an adjustment stroke of 12.5 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia. is 68.0cm without castors.The twin wheel castors are injection moulded in 30% Glass Filled black Nylon..Like Godrej make

Workstation for cash couneter model Frontier, Tile configuration for all panels, above worktop : Combination of fabric magnatic board with white board on worktop side, rest of all metal tile will be below the worktop level, There will be raceway below the worktop provition for mounting switches......Like Godrej make

Workstation chair for cash couneter model , The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.BACK SIZE:47.5 cm. (W) x 58.0cm. (H).SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The mechanism is designed with the following features:3600 revolving type.Upright position locking.Tilt tension adjustment.Seat/back tilting ratio of 1:3 (60 seat tilt/180 back tilt).The pneumatic height adjustment has an adjustment stroke of 12.5 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia. is 68.0cm without castors.The twin wheel castors are injection moulded in 30% Glass Filled black Nylon..Like Godrej make

Manager Desk Trident Senior , The understructure is in prelam panels, made with PLT boards.2Drawer and 3Drawer storage units with different combinations to support Tops, made with 18mmPLT boards.Modesty and back panels, made with 18mm PLT boards.The Pedestals/Storages are fitted with necessary Locks.Tops for senior main desk are of PVC membrane pressed.Made of 25mm thick MDFone side laminate board with 0.4mm PVC membrane pressed on to tops.The top has Duck nose and half round profiles edges.The top is made in only one finish: European Ash.Overall Footprint:1804 x 750 mm.Top thickness:25 mm.Top Dimensions:1200 x 750 mm.Understructure Height:725 mm.Overall Height:750 mm..Like Godrej make

Manager High Back chair Model Leoma PCH - 9M01A , Seat/Back Assembly: the seat is made up of insert moulded Polyurethene Foam upholstered with foam laminated mesh fabric. The insert moulded foam is assembled overa load bearing plastic seat cover.The back is made up of two pice injection moulded frame.The inner frame is upholstered with mesh fabric and mounted on the main assembly.The back has adjustable lumber support for acieving comfortable seating posture.Sub Assembly Seat size = 52.5 cm Width X 51 cm. Depth.Sub Assembly Back size = 48.5 cm. Width 62 cm. Height.Effective Back Height from Seat = 57 cm.Polyuretrhane Foam: The Polyurethane foam for seat is moulded with density = 75 ± 4 kg/m3 and hardness = 34 ± 4.Armrests adjustable: The armrest top is injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest. The armrest height is adjustable up to 4.5cm in 3 steps & width adjustable up to 20mm.Arm top Out Dim = 62 to 65cm.Arm top Centre to centre Dim = 53 to 56cm.Front pivot synchro mechanism: The mechanismis designed with the following features: -360° revolving type.Single point control.Front pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.-3-position locking with anti-shock feature.Connecting spine bracket: Spine bracket is made of Aluminium diecast piece connecting back with mechanism.Adjustable neck rest assy: Neck rest assy is made of polyurethene foam upholstered with foam laminated mesh fabric. The neck rest assy is mounted on the top of back.It can be adjusted up to 45mm up-dn and has angular adjustment of Pneumatic height adjustment: The pneumatic height adjustment has an adjustment of 9.0 cm.Pedestal is made of die cast Aluminium fitted with 5 nos. twin wheel castors(castor wheel:5.0cm). The pedestal is 65.0cm.Pitch centre(75.0 cm with castors).Twin wheel castors: The twin wheel castors are injection moulded in nylon..Like Godrej make

Visitor chair Model Leoma visitor PCH - 9M12A , Seat/Back Assembly: the seat is made up of insert moulded Polyurethene Foam upholstered with foam laminated mesh fabric. The insert moulded foam is assembled overa load bearing plastic seat cover.The back is made up of two pice injection moulded frame.The inner frame is upholstered with mesh fabric and mounted on the main assembly.The back has adjustable lumber support for acieving comfortable seating posture. Sub Assembly Seat size = 52.5 cm Width X 51 cm. Depth.Sub Assembly Back size = 48.5 cm. Width 62 cm. Height.Effective Back Height from Seat = 57 cm.Polyuretrhane Foam: The Polyurethane foam for seat is moulded with density = 75 ± 4 kg/m3 and hardness = 34 ± 4.Armrests adjustable: The armrest top is injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest. The armrest height is adjustable up to 4.5cm in 3 steps & width adjustable up to 20mm.Arm top Out Dim = 62 to 65cm.Arm top Centre to centre Dim = 53 to 56cm.Leg Frame assembly: The sled base Leg frame welded assembly is made from MS ERW round tube with base plate for seat fixing. .Like Godrej make

Personal Locker Unit model 4 Door PLU , The add-on units can be stacked width wise to form bank of lockers having common side panel.10 Lever cam lock with lock lever Option of hasp arrangement.CRCA 0.6mm Thickness.Rigid knockdown construction.Distributed Load Capacity per each shelf level is 35 Kg maximum.Only for 1 Door Model at the top.Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Aesthetically appealing Snap fit ABS plastic handle.Plastic label holder for identification.Attractive punched pattern for ventilation.Size: 380mm(W) x 450mm(D) x 1830mm(H)..Like Godrej make

Two Seater Sofa for visitor area model L - 42 , The Premium Lounge chair is a flexing-back lounge seating system standing on beam with side frame assemblies. The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps.It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk.and black powder coated. The seat/back assemblies are mounted on one of the tie-member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back.The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover.SEAT SIZE:52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T).The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover.BACK SIZE:52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T).The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface..Like Godrej make

Single Seater Sofa for visitor area model L - 41 , The Premium Lounge chair is a flexing-back lounge seating system standing on beam with side frame assemblies. The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps.It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk.and black powder coated. The seat/back assemblies are mounted on one of the tie-member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back.The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover.SEAT SIZE:52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T).The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover.BACK SIZE:52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T).The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface..Like Godrej make

Centre Table for visitor area model PISA , It is 12 ± 0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understucture.It is a welded Assembly made in SS202 grade having dia 12±0.04 as per IS:1762..Like Godrej make

SANKAR FURNITURE

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR