Bid Documents for Renovation of Toilet Block in DIP Area and Old Nagarpalika, at.Modasa Nagarpalika, under SBM 2.0, Dist:- Aravalli (2nd Attempt)

Description Estimated Cost Tender Cost

B1 Renovation of Toilet Block at.Dip Area at.Modasa (Arvalli)

B2 Renovation of Toilet Block at.Old Nagarpalika, at.Modasa (Arvalli)

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my/our tender works out as under Estimated amount put to tender

Estimated amount put to tender Deduct………% below Add………% Above

In words In words………………….

The 18% GST will be Paid Separately for the tender rate shown in the Schedule B

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer‐In‐ Charge

for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Contractor Signature of Chief Officer

MODASA NAGARPALIKA, MODASA

Modasa Nagarpalika, Modasa

Name of Project :- Bid Documents for Renovation of Toilet Block in DIP Area and Old Nagarpalika, at.Modasa

Nagarpalika, under SBM 2.0, Dist:- Aravalli (2nd Attempt)

Name of Work : Renovation of Toilet Block at.Dip Area at.Modasa (Arvalli)

Item Qty. Rate Per Amount

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing 1.00 3757.61 Cu.mt.

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies, 1.00 4577.29 Cu.mt.

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and fixing glazed louvered glass windows and ventilators with

teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to

wood work etc.complete. with wooden louvers plank 12mm thick 5.00 106.29 Smt.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A) 167.00 106.29 Kg.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also taking 16.00 2019.98 Smt.

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit

MODASA NAGARPALIKA, MODASA

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and layingCeramic tiles 6mm thick in skrting risers of steps

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 86.00 1090.32 Smt.

sand) and jointed with white cement slurry

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with 5.00 2236.05 Smt.

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying marble stone slab flooring over 20mm (average)

base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1-

lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry 13.00 2567.79 Smt.

including rubbing and polishing complete. (A) Marble slab 25mm thick

Providing and laying Marble Slab Polished granite stone 20 to 25mm

thick black 2.00 2567.79 Smt.

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all 153.00 49.18 Smt.

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including rounding 64.00 779.70 Smt.

off junctions and extending them upto 15 cm along the all,clearing

with water and oxalic acid etc. as directed.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and 67.00 125.32 Smt.

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 26.00 151.38 Smt.

Extra over items 58 to 71 for plastering on ceilings and sofits of stairs

upto floor two level instead of plastering on walls.

MODASA NAGARPALIKA, MODASA

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1-sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered 167.00 73.74 Smt.

materials. etc complete

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other 231.00 40.59 Smt.

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and 231.00 82.97 Smt.

other foreign matter and sand papered smooth.

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at

the entire periphery of the building and at internal network of building

at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum 22 mm

ID leading into junction box and the loops shall terminate in junction

boxes & test every junction during injecting chemicals for termite

control treatment. The anti termite chemical Imidacloprid 30.5% SC mix

as per IS-6313 (part III) shall be injected by the pressure pump diluted

with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @

Ltr/SMT. The contractor shall submit approved line plan for piping

system and junction boxes dully approved by Engineer in-Charge with

bond of 5 year warranty.(i)Anti Termite chemical injected area

(Chemical injecting incl. labour cost)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 90.00 72.65 Rmt

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 50.00 91.84 Rmt

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

MODASA NAGARPALIKA, MODASA

Providing and fixing in position cowel vent to pipes. (C) 100 mm. dia.

Providing and fixing ball cock of approved. quality as directed. (B)

Abonite (ii) 50mm dia. 1.00 137.89 Each

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe, tap etc. complete. (A) White earthenware flat 4.00 1074.86 Each

back or corner type size 430mm x 260mm x 350mm.

Dismantling santtary fittings like wash basin W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with 14.00 413.49 Each

all lead and lift.

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm 14.00 263.77 Each

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be 10.00 1356.81 Each

measured and paid for separately)(A) vitreous China Pattern: (i) in

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Providing and fixing screw down bib taps of following size. (A) Brass

screw down bib tap polished bright. (i) 20mm dia. 10.00 214.81 Each

Providing and fixing GRAB BAR VERTICAL SWING 2.00 3594.91 Each

Providing and fixing GRAB BAR 680MM LONG 2.00 1283.89 Each

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China:(ii) Flat Back washbasin 3.00 1519.50 Each

550mm x 400mm size. (i) In white colour.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (ii) 20mm dia. 3.00 354.69 Each

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 3.00 859.41 Each

wooden pluge with C.P. brass screws and washers.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned

grating including cost of cutting and making good the walls and floor

100mm inlet and 50mm outlet.(C) 100mm dia.

MODASA NAGARPALIKA, MODASA

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand

:10-Graded stone aggregate 40mm nominal size) bedding for stoneware

pipes of following internal diameters with necessary formwork and 40.00 213.71 Rmt.

curing complete.(B) 150mm dia. (166mm Ave. bed thickness)

Providing and laying (to level or slopes) and jointing with stiff mixture of

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including 40.00 225.57 Rmt.

testing of pipes and joints complete.(B) 100mm dia.

Providing and fixing cast iron spigot and socket soil, waste and

ventilating pipes of the following nominal size. (B) 75mm dia. 50.00 741.01 Each

Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia. 3.00 58.92 Each

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i)

Bends of required degree (any redious) of following nominal 10.00 58.92 Each

diameters. (A) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete. (C) 250mm

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc.complete on 3000.00 3.95 Litre

Point wiring for Light/Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/on surface on wall/ceiling complete with 6A Modular type

switch/bell push & accessories and earth continuity of following type,

erected on PVC/Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on/in wall/ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose/H.D. Connector

as directed. (a) with medium class Rigid PVC pipe and accessories

Pointwiring for on board Looped Plug with 6A Modular type switch &

pin socketerectedon PVC/Metallic/Woodenbox, single mounting base

frame covered with textured/metallic/white front plate module serected 5.00 257.55 Pt.

on/in wall/ceiling with following type accessories Cat.III

MODASA NAGARPALIKA, MODASA

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % (fitting 15.00 295.93 Each

required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Tube

Light with integral driver (iii) 18-20 Watts, Surge - 2KV, IP-20,

conventional 4 feet Cat-lll

Providing and supplying PANSIM automatic (sensor) warm air (30'c to

50' c) hand dryer as per engineer in charge 2.00 6857.90 Unit

Signature of Contractor. Modasa Nagarpalika

MODASA NAGARPALIKA, MODASA

Modasa Nagarpalika, Modasa

Name of Project :- Bid Documents for Renovation of Toilet Block in DIP Area and Old Nagarpalika, at.Modasa

Nagarpalika, under SBM 2.0, Dist:- Aravalli (2nd Attempt)

Name of Work : Renovation of Toilet Block at.Old Nagarpalika, at.Modasa (Arvalli)

Item Qty. Rate Per Amount

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing 1.00 3757.61 Cu.mt.

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies, 1.00 4577.29 Cu.mt.

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel

pulleys complete with bolts, nuts, locking arrangements, stoppers 4.00 6110.51 Smt.

handles including applying a priming coat of red lead paint.

Providing and fixing glazed louvered glass windows and ventilators with

teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to

wood work etc.complete. with wooden louvers plank 12mm thick 5.00 106.29 Smt.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A) 167.00 106.29 Kg.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking 15.00 2019.98 Smt.

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding 3 13.00 257.48 Each

MODASA NAGARPALIKA, MODASA

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement slurry including finised 9.00 1467.72 Smt.

with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab 35.00 1019.00 Smt.

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and layingCeramic tiles 6mm thick in skrting risers of steps

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) 61.00 1090.32 Smt.

and jointed with white cement slurry

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with 5.00 2236.05 Smt.

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying marble stone slab flooring over 20mm (average)

base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1-

lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry 13.00 2567.79 Smt.

including rubbing and polishing complete. (A) Marble slab 25mm thick

Providing and laying Marble Slab Polished granite stone 20 to 25mm

thick black 2.00 2567.79 Smt.

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all 125.00 49.18 Smt.

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including rounding 64.00 779.70 Smt.

off junctions and extending them upto 15 cm along the all,clearing with

water and oxalic acid etc. as directed.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and 67.00 125.32 Smt.

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift 177.00 19.92 Smt.

MODASA NAGARPALIKA, MODASA

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Extra over items 58 to 71 for plastering on ceilings and sofits of stairs

upto floor two level instead of plastering on walls.

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 84.00 300.66 Smt.

1-sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered 167.00 73.74 Smt.

materials. etc complete

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other 231.00 40.59 Smt.

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and 231.00 82.97 Smt.

other foreign matter and sand papered smooth.

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a

depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum 22 mm 38.00 63.63 Smt.

ID leading into junction box and the loops shall terminate in junction

boxes & test every junction during injecting chemicals for termite control

treatment. The anti termite chemical Imidacloprid 30.5% SC mix as per

IS-6313 (part III) shall be injected by the pressure pump diluted with

water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT.

The contractor shall submit approved line plan for piping system and

junction boxes dully approved by Engineer in-Charge with bond of 5 year

warranty.(i)Anti Termite chemical injected area (Chemical injecting incl.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 90.00 91.84 Rmt

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

MODASA NAGARPALIKA, MODASA

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 50.00 72.65 Rmt

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing in position cowel vent to pipes. (C) 100 mm. dia.

Providing and fixing ball cock of approved. quality as directed.(B)

Abonite (ii) 50mm dia. 1.00 137.89 Each

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat 4.00 1074.86 Each

back or corner type size 430mm x 260mm x 350mm.

Dismantling santtary fittings like wash basin . W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with 7.00 413.49 Each

all lead and lift.

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm 9.00 263.77 Each

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be 5.00 1356.81 Each

measured and paid for separately)(A) vitreous China Pattern :(i) in

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 20mm dia.

Providing and fixing GRAB BAR VERTICAL SWING 2.00 3594.91 Each

Providing and fixing GRAB BAR 680MM LONG 2.00 1283.89 Each

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China:(ii) Flat Back washbasin 3.00 1519.50 Each

550 mm x v 400mm size. (i) In white colour.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (ii) 20mm dia. 3.00 354.69 Each

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 3.00 859.41 Each

wooden pluge with C.P. brass screws and washers.

MODASA NAGARPALIKA, MODASA

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned

grating including cost of cutting and making good the walls and floor 9.00 634.17 Each

100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand

:10-Graded stone aggregate 40mm nominal size) bedding for stoneware

pipes of following internal diameters with necessary formwork and 40.00 213.71 Rmt.

curing complete.(B) 150mm dia. (166mm Ave. bed thickness)

Providing and laying (to level or slopes) and jointing with stiff mixture of

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including 40.00 225.57 Rmt.

testing of pipes and joints complete.(B) 100mm dia.

Providing and fixing cast iron spigot and socket soil, waste and

ventilating pipes of the following nominal size.(B) 75mm dia.

Providing and fixing C.P. brass waste for washbasin

or sink. (A) 32mmdia. 3.00 58.92 Each

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i)

Bends of required degree (any redious) of following nominal 5.00 58.92 Each

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x 5.00 1292.19 Each

100mm size P type.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including 15.00 359.84 Rmt.

testing of joints complete.(C) 250mm

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc.complete on 3000.00 3.95 Litre

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base 10.00 449.45 Pt.

frame covered with textured/ metallic front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ ceiling rose / H.D. Connector as directed. (a) with medium

class Rigid PVC pipe and accessories Cat. III

Pointwiring for on board Looped Plug with 6A Modular type switch &

pin socketerectedon PVC /Metallic /Woodenbox, single mounting base

frame covered with textured/ metallic/ white front plate module serected 5.00 257.55 Pt.

on / in wall / ceiling with following type accessories Cat. III

MODASA NAGARPALIKA, MODASA

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % (fitting

required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Tube

Light with integral driver (iii) 18-20 Watts, Surge - 2KV, IP-20,

conventional 4 feet Cat-lll

Providing and supplying PANSIM automatic (sensor) warm air (30'c to

50' c) hand dryer as per engineer in charge 2.00 6857.90 Unit

Signature of Contractor. Modasa Nagarpalika

MODASA NAGARPALIKA, MODASA