PROVN OF PARKING SHED FOR SR JR SAILORS AND SPL REPAIRS TO BUILDING NO P 48 AND TOILET BLOCK AT INS SARDAR PATEL PORBANDAR

Amount

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil including cutting of bushes, saplings and cutting trees not exc. 30m girth etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil including removing of surplus soil complete all as specified and directed by Engr-in-charge.

Removing excavated material ( Soils) exc. 250 m and n. exc. 500 m, depositing where directed at a level n. exc. 1.5 m above the starting point, complete all as specified and directed.

Hardcore of Broken stone or boulders of gauge n. exc 63mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed

Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded crushed stone aggregate min radius of 75mm as in covet fillet in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, filling rails embedded sec, surface/channels and benching for manhole and haunching around manhole frame, sloping on roof top surfaces including necessary form work, finishing even and smooth without using extra cement, complete all as specified and as directed.

PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in foundation of walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base (75 mm thick) complete all as specified and directed.

100mm thick plain cement concrete 1:2:4 type B-1 (using 40 mm graded crushed stone aggregate) laid in alternat bays including finishing surfaces of concrete even & smooth complete all as specified and as directed.

Forming 12mm thick expansion joints filled with preformed bituminous filler and top 30 primed and sealed with sealing compound grade 'A' thickness of concrete slab to be 100mm

Reinforced Cement concrete (1:1.5:3), type A-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Supply only integral water proofing compound. Note : Water proofing treatment shall be used as per direction of Engineer In Charge and to be used in proportion as per Manufacturer's recommendation.

Stone masonry walling or squared walling in cm 1:6, brought upto courses using dressed equal size Porbandar stone of superior quality complete all as specified and directed.

Stone masonry walling or squred walling in cm 1:6, brought upto courses but except stone complete all as specified and directed (Serviceable stones retrieved from demolition will be reused).

Forming jambs to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing in Cement mortar 1:4 to match existing work, complete all as specified and as directed

Making good under cills or over arches, lintels and bressummers with PCC 1:2:4 or CM 1:4 including all pinning when necessary, incl providing necessary reinforcement & steel works etc complete all as specified and as directed. Note : Reinforcement or Steel Section if required shall be measured and paid separately.

Use & waste of formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs and similar work; not exc 200 mm thick , rough finished surfaces of concrete, (horizontal or sloping), complete all as directed.

Taking down chowkat or frames n.exc 1.5 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Taking down shutters of size not exceeding 2.0 Sqm each, complete all as specified and as directed.

Plain solid, straight chowkats and frames of second class hard wood wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed.

Factory made 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, and fitted to chowkats, kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Factory made 30 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, and fitted to chowkats, kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Factory made 35mm thick, 2nd class hard wood , plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Fibre glass reinforced plastic (FRP) door frames of three legged of cross section 90 x 45 mm having single rebate of 32 x 15 mm to receive shutter of 30 mm thick. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. The Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block of 2nd Class Hardwood in all the three legs. The frame shall be covered with fibre glass from all side. M.S stay shall be provided at the bottom to support the frame, fixed in repairs, complete all as specified and as directed.

35 mm thick glass fibre reinforced plastics panelled door shutter of required colour & approved colour and manufactures made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails & styles with wooden frame & suitable blocks of seasoned 2nd class wood inside at required places for fixing of fittings along with MS tube frame of 19 gauge all around the styles & rails duly coated with steer primer cast monolithically with 5mm thick FRP laminate for panels & conforming to IS:14856:2000 including fixing to frames with necessary hinges, both side handles ( 2 Nos ) , tower bolts etc . The shade & colour shall be approved by Engineer-in-Charge, fixed in repairs, complete all as specified and as directed.

100mm Butt hinges medium weight, cold rolled, stainless steel, and fixed all as specified.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

150mm extruded aluminium alloy handles, fabricated type, anodised all as specified.

150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified.

Stainless steel curtain rod,20mm dia, superior quality, fixing with side brackets, end caps and fixed with PVC rawl plugs & steel screws fixed in repairs complete all as specified.

Fancy type Drapery rods, powder coated aluminium of 25mm size with fixing brackets, stops, rollers etc. fixed in repairs, complete all as specified as directed.

Acrylic towel rail, 600mm long, min 20mm dia of superior quality, fancy type, fixed in repairs complete all as specified

Magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed in repair complete all as specified and as directed .

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, fixed in repairs complete all as directed.

Mild steel work conforming to Fe-290 Gde E-165 as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, (Posts and Struts in fencing including embedding in concrete etc) drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, gates wind tie including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work, fixed in repairs, complete all as specified and as directed by Engineer in Charge.

Mild steel framed work conforming to Fe-290, Gde-E-165 such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Mild steel CRS bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel CRS bars 8mm dia as in stirrups spacer and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel rolled sections Fe 410 -W (Gde- E- 250) quality- A as in framing for roofing cladding, rafters; purlins fixed with angle, cleats, hollow section and connecting plates etc including embedding in concrete and screwing etc complete all as specified and directed by Engr-in-charge.

Powder coated aluminium section of overall size of outer frame 90mmx45.5mmx1.2mm thickness fixing with gasket, beading, Star lock also Gaps to be filled with weatherproof Silicon Sealant (both sides) and fixing to opening area including necessary cleats, brackets, screws bolts, fixed to wall, floor complete all as specified and as directed Engineer In Charge.

Powder coated aluminium sliding window shutters, aluminium section (40mmx18mmx1.2mm thickness aluminium Section for window Shutters) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) or hinges type B-21 100 mm long (2 nos.), suitable handle or Star lock, (1 no.) gasket, Fixing arrangement and clips NOTE : Glass & Wire mesh shall be measured and paid separately.

Aluminium anodized Deco grills 7.50 mm of Design No DG 104 with suitable size F & H sections as required to aluminium/wooden windows incl fixing embedded in concrete complete all as specified and directed.

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane.

18-19mm thick pre laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging, fixed in repair, complete all as specified and as directed.

20mm thick Granite of Ist quality, table rubbed and polished, in floor set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick bedding layer in cement mortar 1:4, including grinding and polishing, complete all as specified and as directed.

20mm thick Granite of Ist quality, table rubbed and polished as in skirting / DADO or vertical surfaces and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including rendering 10 mm thick in cement mortar 1:3 complete all as specified and as directed.

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in platform, partition or shelving's including making chases and making good in CM 1:2, fixed in repair, complete all as specified and as directed.

50 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) layed in alternative bays including finishing surfaces with broom finishing complete all as specified and as directed.

Glazed ceramic tiles, coloured (light colour as approved), of size 300 x 600 x 7mm thick on vertical surfaces such as in skirting / dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

Non skid Ceramic coloured Joint free tiles of size 400 x 400 x 8mm thick (area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified.

Non skid Ceramic coloured Joint free tiles of size 600mm x 600mm x 10mm thick (area of each tile exceeding 0.18 but not exc 0.38 sqm each) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15mm thick screed or bedding layer in cement mortar (1:6), the complete all as specified and as directed.

Glazed ceramic tiles, joint free,coloured (light colour as approved), of size 600mm x 600mm x 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.

Chequered cement concrete coloured tiles ( grey cement mixed with pigment) 20cmx20cmx25mm thick set over & including 20 mm thick bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc, Complete all as specified and directed.

Rendering 10 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:6 finished even and smooth without using extra cement including mixing Integral Water proofing treatment (where ever required as directed by Engineer in charge) complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

10 mm thick (average) bedding layer on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, mixed with WPC, finishing even and smooth without using extra cement complete all as specified and as directed. Note: WPC measured and paid separately.

Rendering 5 mm thick on fair faces of brick work or concrete surfaces as on ceiling surface, facia and projection of slabs, and window projection, in CM 1:3 finished even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement including mixing Integral Water proofing treatment ( where ever required as directed by Engineer in charge ) complete all as specified and as directed . Note : Water proofing compound will be measured and paid separately)

Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2mm thick wall care putty complete all specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Preparing old decorated surfaces by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of distempered or painted surface and applying two coat of oil bound distemper over 2mm thick wall care putty to filling nail holes, cracks to make the surfaces smooth complete all as specified and as directed.

Preparation of newly plastered surfaces and applying three coats of white wash as in ceiling complete all specified and directed.

Preparation of newly plastered surfaces of walls, soffits & facias of beam ,chajjas etc applying two coats of weather proof Acrylic based exterior emulsion paint over a coat of primer complete all as specified.

Preparation of old plastered surfaces of walls, soffits & facias of beam, chajjas & incl roof/floor bottom ceiling portion and applying two coats of acrylic emulsion weather proof antifungal paint over one coat of compatible primer as per manufacturers recommendations complete all as specified and as directed by Engr-in-charge.

4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed.

Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic Enamel paint complete all as specified and as directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any position complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any position complete all as specified

Taking up or down existing steel water tubing, 25mm bore and above any size alongwith connections fixed/laid in any position complete all as specified

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 1000 Litre capacity, hoisted and fixed in position, with lid, tounge nipple for inlet, outlet connections etc. fixed in repairs, complete all as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 2000 Litre capacity, hoisted and fixed in position, with lid, , tounge nipple for inlet, outlet connections etc. fixed in repairs,complete all as directed by Engr-in-Charge.

Bib tap, brass 15mm bore, long Nose (Long Body) with capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Pillar tap brass 15mm bore, with capstan head chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Angular stop valve brass 15mm bore, Capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Stop valve brass 15mm bore, concealed type with capstan head chromium plated fencing type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Float valves high pressure of PTMT with aluminium rod and high density plastic ball ( long/big size ) screwed for iron pipe and fixed for 25mm bore pipe (Minimum weight-455gms), fixed in repairs, complete all as specified and as directed by Engineer-In-Charge

600 mm long PVC connection Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm suitable of 15 mm nominal bore GI pipe complete with brass chromium plated adaptors and rubber washers. The weight of brass coupling nuts shall not be less than 40 grams. The weight of PVC pipe shall not be less than 63grams, fixed in repairs complete all as specified and directed.

110mm bore PVC (SWR) pipes of pressure rating 4 kgf / cm2, single socketed in any length with rubber ring, laid in trenches/ fixed to wall /ceiling , complete all as specified and directed.

PVC (SWR) pipes, 75mm bore, single socketed, 2.5 Kgf per Sqcm pressure, in any length with rubber ring joints, laid in trenches/ fixed to wall /ceiling complete all as specified and as directed

110mm dia bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius with rubber ring including fixing clips laid in trenches/ fixed to wall /ceiling ,complete all as specified and as directed

75mm dia bore, PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius with rubber ring , including fixing clips, laid in trenches/ fixed to wall /ceiling , complete all as specified and as directed.

110mm bore PVC (SWR) vent cowl complete all as specified and directed.

75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Stainless steel grating, 150mm squre size, superior quality , fixed in repairs, complete all as specified and directed.

75mm PVC (SWR) floor trap, plain including jointing with solvent cement and white cement complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, fixed in repairs, complete all as specified and directed.

Kitchen sink with drainage board made of stainless steel 1mm thick (SS grade 304AISI 18/8) IS embossed (IS:13983) glossy finish with plugs, washers and wastes; including bedding in cement mortar to platform or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified.

Vitreous china white squatting pan Orissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed in repair, complete all as specified and as directed.

Vitreous china (White) half stall urinal with grating, union for discharge pipe, spreader, incl 40mm dia PVC heavy duty waste pipe upto floor trap, fixing with brackets, flush pipe, union for discharge pipe, connection pipe , Incl fixing in Urinal spreader and restoring connection, complete all as specified and as directed by Engineer in Charge

PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed.

Brass Chromium plated shower rose 125mm dia with swivel joints, including shower arm 15mm dia, 195mm long with 45 degree bend and flange of CP brass fixed in repair complete all as specified.

Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets, restoring all connections, fixed in repairs,complete all as specified.

CP Soap dish of size 160 x 160 x 90mm or over fixed to plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed

16mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

25mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

CPVC ball valve 25 mm bore fixed in CPVC pipeline by cutting of pipeline and fixing with solvent solution complete all as specified and as directed.

CPVC ball valve 20 mm bore fixed in CPVC pipeline by cutting of pipeline and fixing with solvent solution complete all as specified and as directed.

CPVC ball valve 16 mm bore fixed in CPVC pipeline by cutting of pipeline and fixing with solvent solution complete all as specified and as directed.

Cutting existing water pipe line of any size, description & size and making connection suitable for 25 bore CPVC pipe fitting incl necessary reducers ferrule and required sections complete all as specified and as directed.

Cutting into existing sewage line manholes for connecting new drains of any dia of pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 100mm dia.complete all as specified.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete articles and precast concrete block walling etc. Complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry bedded in any mortar complete all as specified.

Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified.

Dismantling U/s CI Pipe/PVC along with fitting of 50/75/100 mm dia or any size, below or above ground level ,jointed in cement mortar and taking out complete all as specified.

Removing the plant/growth of any description size, any location of external surfaces of walls / slab/chajjas etc shafts by cutting & removing the roots completely and spraying the Gramoxone 24 SL/ RoundUp (each plant 100 ML) to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0(1:2:4) usibng 12.5 mm graded aggregate complete all as directed by Engr In Charge .

Taking down carefully copper/aluminium point wiring (light/fan, buzzer, socket or power point etc) complete including all fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following:- One light/ fan point controlled by one one way switch, 5Amps.

One 5 Amps 3/5 pin socket outlet on independent board .

One 5 Amps 3/5 pin socket outlet on same board with other switches.

Point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for Description a for independent switch socket outlet 6 pin 5/15 Amps and all as directed at site.

Ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, hum free, AC 230 volts, 100 watts, duly ISI marked complete all as specified & directed. Make: - Legrand, Cat No. 6755 30 or Havells, Cat No : AHLRFHW005 complete all as specified.

Switch piano flush type 5/6 Amps single pole one way 230 Volts , complete all as specified and as directed.

Switch piano flush type 15/16 A single pole one way 230 V complete all as specified.

Socket Outlet 2 in 1 3/5pin 5 Amp flush type 230 Complete all as specified and as directed.

Socket Outlet 2 in 1 3/6 pin 5 and 15 Amp flush type 230 V, complete all as specified and as directed.

Ceiling rose surface Bakelite, 65x50mm, 3 terminals , complete all as specified and as directed.

Taking down carefully ceiling fan of any sweep refixing to its original location or other location after spray painting using super enamelled paint including 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan, rubber reel nut bolts and split pin complete all as specified & directed.

Fan hook fabricated out from MS flat iron 50 x 06 mm thick bent to shape as required and suitable for hanging 1400 mm sweep ceiling fan on wooden raft / GI pipe / truss with and including nuts, bolts, washers and check nuts etc complete all as specified.

Lamp holder, PVC / Polycarbonate type of angular shape with back plate suitable for batten fitting complete all as specified & directed.

LED light fittings decorative 18 Watt recess/surface mounting type extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size with mounting clamps complete all as specified and as directed. Make : Crompton Cat part No-Retro LED T-5LT5RT-18-CDL or eq model of make specified

Metal body exhaust fan 250 mm sweep AC, 240 volts consist of Double ball bearing & Louvers metal body, 4 Blades fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete all as specified & directed by Engr in charge. Make :Havells ventilair Dx WHT OR eq model of make specified.

LED security light 25 watt, IP 65 grade, glare free uniform illumination extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting with 2 core flexible copper conductor cable of suitable size complete all as specified and as directed. Make -Crompton Astra LSTS -25-CDL or compatible Model of make specified.

Sub main wiring concealed with 4 Sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable 1100 V grade, drawn into and including rigid non-metallic PVC concealed conduit 20mm dia or higher, class 'B' complete with all PVC conduit accessories including 2.5 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to common earth point all as Specified and directed by Engr-in-Charge.

Sheet metal enclosure, double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing, fixed in repairs, complete all as directed by Engineer - in - Charge. Make :- Legrand, Cat No. 6077 11 & 6077 54 or compatible model of make as specified in Appx 'B' herein after complete all as specified.

MCB, DP, AC, 240 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs , fixed in repairs, complete all as specified & directed. Make :- Legrand, Cat No. 4085 74 or equivalent in Hager, Cat No : NCN232N or Schneider, Cat No : A9N2P32C compatible model of make as specified in Appx 'B' herein after complete all as specified.

MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs , fixed in repairs, complete all as specified & directed. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C or compatible model of make as specified in Appx 'B' herein after complete all as specified.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

BABUBHAI BHIMABHAI PANDAVADRA

SHREE CHAMUNDA ENTERPRISE

Vastushilp Building Designer