CONSTRUCTION OF NEW BUILDING OF MUNICIPAL CORPORATION OFFICE DISTT. SURENDRANAGAR

Surendranagar Municipal Corporation

NAME OF PROJECT : Construction of New Building of Municipal Corporation Office Distt. Surendranagar

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting 2.00 metre high temporary barricading and

Scaffolding with Microfiber curtain wall at peripheral location of construction

site as per drawing/ direction of Engineering- Charge which includes writing

and painting, arrangement for traffic diversion such as traffic signals during

construction at site for day and night, glow lamps, reflective signs, marking,

flags, caution tape as directed by the Engineer in-Charge. The barricading

provided shallincluding stacking

be retained of serviceable

in position materilasi/c

at site continuously and disposal

unserviceable materials with all lead and lift. For R.C.C. work, brick work,

2 tile work, bathroon & toilet fixtures, windows & Doors and also ventilation. Job 1.00 121,200.00

Carryout Soil Investigation work including exploratory drilling of 150 mm

dia borehole in all sorts of soil& Rock up to 10m depth from G.L, collecting

undisturbed samples at an interval of 1.5 m. depth, determining depth of

water table etc. Conducting necessary laboratory tests for all type of

classification and determination of soil parameters necessary for

3 determining pile capacity like density, shear and consolidation parameters Job 1.00 44,844.00

etc., including submission of report in three copies covering investigation

data and recommendation for SBC etc. all as per specification at required

Excavation for foundation upto 1.5 m depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto 50 Cmt 2757.00 117.08

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

5 up to 50 Meter lead.(C) Hard Murrum, etc. complete as per detailed & Cmt 2757.00 273.54

directed by EIC.

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting

6 out and stacking of useful materials and disposing of the excavated stuff Cmt 1743.00 285.73

upto 50 Meter lead.(C) Hard Murrum

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

7 disposited layer by ramming and watering. Cmt 295.00 130.39

Filling in foundation and plinth with murrum or selected soil in layers of

8 20cm. thickness including watering, ramming and consolidating etc. Cmt 1068.00 282.02

complete. (more than 10 ton)

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

9 concrentration inclusive of one litre chemical emulsion appication at the rate Smt. 1297.00 56.63

of 5 Litre chemical /Sqm of sur face is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand : 4-

10 graded stone aggregates 20 mm nominal size) and curing complete Work in Cmt 473.00 3,631.49

(A) Foundation and Plinth

Architect: ARG Creation Pvt. Ltd. 1 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying in position Ready Mixed M-350 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported

to site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit

mixer to site of laying, including the cost of centering shuttering finishing

and excluding the cost reinforcement, including cost of admixtures in

11 recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash(Min cement level

as per latest IS 456 shall be maintained) (Cement level 500 kg ); Raft

Providing and laying in position Ready Mixed M-350 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported

to site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit

mixer to site of laying, including the cost of centering shuttering finishing

and excluding the cost reinforcement, including cost of admixtures in

12 recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash(Min cement level

as per latest IS 456 shall be maintained) (Cement level 500 kg ); Retaining

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

13 reinforced concrete work in (A) Foundations, footings, Base of columns and Cmt. 420.50 4,626.81

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

14 reinforced concrete work in (B) Walls in Basement & below the plinth Cmt. 58.50 6,655.90

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

15 reinforced concrete work in (B) Walls, for Ground floor Cmt. 23.00 6,655.90

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for First

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

18 reinforced concrete work in columns below plinth Cmt. 95.00 5,214.63

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Ground Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Architect: ARG Creation Pvt. Ltd. 2 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

20 reinforcement for RCC work in (D) For Columns for any type of cross Cmt. 80.00 7,019.69

sectional area at First Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Second Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Terrace Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

23 reinforced concrete work in Beams upto floor two level: PLINTH BEAM / Cmt. 235.50 6,177.16

Ground beam / Tie beam

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

24 reinforced concrete work in Lintels / Copping upto floor two level. Cmt. 24.50 6,120.60

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

25 reinforced concrete work in Chajjas upto floor two level. Cmt. 16.00 6,832.65

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

26 reinforced concrete work in © Slabs upto floor two level. : Grade slab Cmt. 213.50 4,749.02

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. : Basement Staircase

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. :Ground Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. :First Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

30 work in © Beams upto floor two level. . : GROUND FLOOR BEAM Cmt. 124.50 6,612.47

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

31 work in © Beams upto floor two level. . : FIRST FLOOR BEAM Cmt. 129.50 6,652.05

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

32 work in © Beams upto floor two level. . : SECOND FLOOR BEAM Cmt. 104.50 6,691.63

Architect: ARG Creation Pvt. Ltd. 3 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

33 work in © Beams upto floor two level. . : TERRACE FLOOR BEAM Cmt. 4.50 6,731.22

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

34 reinforced concrete work in © Slabs upto floor two level. : Basement slab Cmt. 256.00 6,445.82

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

35 concrete work in (C) Slabs upto floor two level. :Ground floor Slab Cmt. 188.50 6,445.82

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

36 concrete work in (C) Slabs upto floor two level. :First floor Slab Cmt. 195.50 6,485.40

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

37 concrete work in (C) Slabs upto floor two level. :Second floor Slab Cmt. 107.00 6,524.98

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

38 concrete work in (C) Slabs upto floor two level. :Terrace floor Slab Cmt. 1.50 6,564.57

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

39 bending, binding and placing in position complete upto all floor level. kg 432835.00 76.21

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

40 Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Cmt. 7.00 4,051.78

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure above plinth level upto floor two level (B) Conventional

Providing and fixing of AAC Panels of Thickness 125mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with consideration of below

Specification, Inculding cutting, groove filling with water proof bonding

sealent / Putty , at all height work as per IS : 6072 having a tongue groove

edge. The rate should also be include of all L clips, power tools nacessary to

cutting jointing and finishing work including PPEs, Filling of joint with the

bonding compound and wire mesh overlapping at both the sides about

mm. Mode of measurement would be a finish surface only. The rate also

include the cutout making at site in pre designing factored complete as per

detailed & approved by the consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

42 Flexural Strength > 1 N/mm2 Smt 1830.00 3,374.39

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Architect: ARG Creation Pvt. Ltd. 4 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Provising and fixing of AAC Panels of Thickness 100mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with consideration of below

Specification, Inculding cutting, groove filling with water proof bonding

sealent / Putty , at all height work as per IS : 6072 having a tongue groove

edge. The rate should also be include of all L clips , power tools nacessary

to cutting jointing and finishing work including PPEs, Filling of joint with the

bonding compound and wire mesh overlapping at both the sides about

mm. Mode of measurement would be a finish surface only. The rate also

include the cutout making at site in pre designing factored complete as per

detailed & approved by the consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

43 Flexural Strength > 1 N/mm2 Smt 1286.00 3,374.39

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Provising and fixing of AAC Panels of Thickness 100mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with 8mm Thick Bison panel on

both side and consideration of below Specification, Inculding cutting, groove

filling with water proof bonding sealent / Putty , at all height work as per IS :

6072 having a tongue groove edge. The rate should also be include of all L

clips , power tools nacessary to cutting jointing and finishing work

including PPEs, Filling of joint with the bonding compound and wire mesh

overlapping at both the sides about 50 mm. Mode of measurement would

be a finish surface only. The rate also include the cutout making at site in

pre designing factored complete as per detailed & approved by the

consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

44 Compressive Strength > 4 N/mm2 Smt 63.00 5,985.26

Flexural Strength > 1 N/mm2

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in cement mortar 1:5 ( 1- Cement : 5 -

45 coarse sand ) in foundation and plinth (B) Conventional Extra for half brick Smt 51.00 641.16

masonry in superstructure above plinth level upto all floor level. (B)

Supplying and fixing of GRC Jharokha Type 1 as per Image & specification

46 and complete as per detailed drawing & Directed by EIC. Nos. 38.00 40,920.45

Supplying and fixing of GRC Jharokha Type 2 as per Image & specification

46.01 and Size and complete as per detailed drawing & Directed by EIC. Nos. 15.00 123,619.46

Supplying and fixing of GRC Column Type 1 as per Image & specification

46.02 and Size and complete as per detailed drawing & Directed by EIC. Nos. 12.00 3,646.91

Supplying and fixing of GRC Column Type 2 as per Image & specification

46.03 and Size and complete as per detailed drawing & Directed by EIC. Nos. 12.00 34,162.95

Architect: ARG Creation Pvt. Ltd. 5 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and fixing of GRC Element Type 1 as per Image & specification

46.04 and Size and complete as per detailed drawing & Directed by EIC. Nos. 468.00 214.52

Supplying and fixing of GRC Element Type 2 as per Image & specification

46.05 and Size and complete as per detailed drawing & Directed by EIC. Nos. 12.00 80,446.50

Supplying and fixing of GRC Element Type 3 as per Image & specification

46.06 and Size and complete as per detailed drawing & Directed by EIC. Nos. 154.00 4,891.15

Supplying and fixing of GRC Arch type 1 as per Image & specification and

46.07 Size and complete as per detailed drawing & Directed by EIC. Nos. 3.00 12,066.98

Supplying and fixing of GRC Arch type 2 as per Image & specification and

46.08 Size and complete as per detailed drawing & Directed by EIC. Nos. 5.00 6,972.03

Supplying and fixing of GRC Dome type 1 as per Image & specification and

46.09 Size and complete as per detailed drawing & Directed by EIC. Nos. 1.00 98,681.04

Supplying and fixing of GRC Dome type 2 as per Image & specification and

46.10 Size and complete as per detailed drawing & Directed by EIC. Nos. 1.00 268,155.00

Supplying and fixing of GRC Railing as per Image & specification and Size

46.11 and complete as per detailed drawing & Directed by EIC. Nos. 433.00 5,899.41

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment. Including

providing and fixing the jali with nails, etc complete as directed by the site-

Providing & laying average 18-20mm thick double coat water proof

smooth/ wired finish cement plaster on sides of masonry work/ block wall/

RCC wall, 12 to 15mm thick first coat in CM 1:3 (1 cement : 3 coarse sand)

by spraying, second coat of 6mm of CM 1:3 (1 cement : 3 fine sand) and

mixing water proofing compound powder & liquid of approved make in

recommended proportions (by manufacturers) in both coats including

finishing with a flooting coat of neat cement slurry etc complete for all floor.

and shall be guaranteed for minimum period of 10 years after handing over

the completed building by the main contractor to be finished as directed.

48 Stamp paper guarantee 10 years to be furnished before receiving any Smt 1285.00 334.48

payment from the client. Waterproofing powder & liquid of approved make

recommended proportions is to be applied before each coat and final

finishing coat. (Item shall be operated for water retaining structures, sunks,

basement walls & Slab(10mmthk.) and other places specified by Architect/

EIC ): Basement

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

49 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 447.00 163.85

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering above first floor upto

second floor level and finished even and smooth in (ii) Cement mortar 1:4

50 (1-cement :4-sand) Extra over items 58 to 64 for finishing with a floating Smt 392.00 212.06

coat of neat cement slurry.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering above Second floor upto

Terrace floor level and finished even and smooth in (ii) Cement mortar 1:4

51 (1-cement :4-sand) Extra over items 58 to 64 for finishing with a floating Smt 378.00 260.27

coat of neat cement slurry.

Architect: ARG Creation Pvt. Ltd. 6 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering Terrace floor level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Extra over items 58 to 64 for finishing with a floating coat of neat cement

Providing 10mm thick cement plaster in single coat on brick/concrete walls

, slab for interior plastering upto floor two level and finished even and

53 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Basement level Smt 1237.00 123.13

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

54 (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor level Smt 1274.00 171.03

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

55 (ii) Cement mortar 1:4 (1-cement :4-sand) First floor Smt 1274.00 219.24

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

56 (ii) Cement mortar 1:4 (1-cement :4-sand) Second floor Smt 687.00 267.45

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement

: 4 coarse sand ), furrowing the under layer with scratching tool, applying

cement slurry on the under layer @ 2 Kg of cement per square metre, top

layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone

chipping 10 mm nominal size), in panels with groove all around as per

57 approved pattern, including scrubbing and washing the top layer with Smt 1598.00 1,173.87

brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge (payment for providing

grooves shall be made separately).

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete as approved and directed by Consultant / EIC.

Providing simple or ornamental lime plaster upto floor two level at front

façade, cornice, flower pattern, geometric pattern, Applying traditional lime

plaster on all surfaces, in proportion of 1:3 (lime: sand) with traditional

method like sieving, slaking, crushing and knocking etc and also use of only

natural additives in lime mortar, using approved quality lime cured as per

59 standards, to match with existing quality of mortar and plaster, applied and Smt 175.00 2,272.50

cured as per standards as required by site conditions and Architect /

Engineer in-charge approval.

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut Granite

of any colour and shade, & finish, as per detailed by architect /Consultant

for flooring, dado skirting, cladding, steps and risers, kitchen platforms,

vanity counters, window & Door sills , fascias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick

mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on In

dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

60 sand), joints treated with white cement, mixed with matching pigment, Smt 1094.00 3,504.70

epoxy touch ups, including BSpacer tape 6.4 mm thick x 4 TO 6 mm as per

detailed groove, rubbing, curing, moulding and polishing to edges to give

high gloss finish as per concept etc. complete at all levels.

Architect: ARG Creation Pvt. Ltd. 7 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] polished in pattern & at all edges should be molded in rquired

finish, Pre-moulded and pre-polished, machine cut Granite of any colour

and shade, & finish & texture, as per detailed by architect / Consultant, for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1

acid proof cement : 4 coarse sand). And In dado/skirting on In

dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

61 sand), joints treated with white cement, mixed with matching pigment, Smt 460.00 4,146.56

epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO 6 mm as per

detailed groove, rubbing, curing, moulding and polishing to edges [Ruff

[Send-blasted- LAPORTA] polished] to give high gloss finish as per concept

etc. complete at all levels.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

62 flooring and jointed with color cement slurry including finised with flush Smt 1868.00 1,204.20

pointing & cleaning the surface etc. complete for light shade / Dark Shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

63 flooring and jointed with color cement slurry including finised with flush Smt 198.00 1,397.83

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

64 coarse sand) and jointed with white cement slurry Smt 1032.00 1,141.45

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

(1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

65 slurry mixed with pigment to match the shade of slab including rubbing and Smt 129.00 971.95

polishing etc. complete. (A) 25mm thick

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick polished

kota stone platform fixing in top and sides and intermediates supports

66 fixing with cement mortar and adhesive and finishing including making Smt 17.00 7,910.56

recess for Kitchen/ Laboratory sink etc. complete as approved and directed

by Consultant / EIC.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

67 with wooden shutter of size 2000 x 2400mm along with all hardwares etc. Smt 94.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Architect: ARG Creation Pvt. Ltd. 8 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

68 with wooden shutter of size 1200 x 2400mm along with all hardwares etc. Smt 44.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

69 with wooden shutter of size 900 x 2400mm along with all hardwares etc. Smt 55.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

70 with wooden shutter of size 750 x 2400mm along with all hardwares etc. Smt 48.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 2000 x 1500 ) along

with all hardwares etc. complete as per specifications, concept /direction

and as per approved make list & by Architect, and directed by Engineer-In-

Architect: ARG Creation Pvt. Ltd. 9 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc (size 1125 x 2250 ) along with

all hardwares etc. complete as per specifications, concept /direction and as

per approved make list & by Architect, and directed by Engineer-In-Charge.

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc (size 1225 x 2250 ) along with

all hardwares etc. complete as per specifications, concept /direction and as

per approved make list & by Architect, and directed by Engineer-In-Charge.

Architect: ARG Creation Pvt. Ltd. 10 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing of Sliding Window- 3 Track, 3 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material source by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 4 Track outer frame -128

mm X 47.7 mm,Handle - 70 mm x 30 mm, Interlock- 50 mm x 37mm,

Shutter top bottom - 70mm x 27.5 mm. Glass - 6 mm Clear toughened

from Saint Gobain. All externally visible surface and the internal visible

surfaces will have powder coating finish RAL 9010 of 60 -70 micron

thickness, Jotun Make or equivalent. The non visible aluminium surfaces will

have minimum chromatizing treatment. The outer frame should have 90º

fabrication joint with frame insert at all 4 corners made of nylon

material for better resistance to water leakage.The sliding should have 90º

fabrication joint with inserted interface, antirattle plastic parts and antilift

74 plastic. Interlocks interface should have EPDM sealing in addtion to wool pile Smt 66.00 10,224.41

for better resistance to air, water. All Hardware should be Euro Groove Type-

1 compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc.(Size 4250 x 2250) along with

all hardwares etc. complete as per specifications, concept /direction and as

per approved make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Ventilation - window of size 600 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

75 have minium chromatizing treatment. All hardware should be Euro Groove Smt 3.00 11,623.08

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Providing and fixing of Ventilation - window of size 2000 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. All externally visible surface

and the internal visible surfaces will have power coating finish RAL 9010 of

60-70 micron thickness, Jotun make or equivalent. The non visible

aluminium surfaces will have minium chromatizing treatment. All hardware

76 should be Euro Groove type-1 compatible door handles, flush tower bolt, Smt 33.00 9,582.88

door hinges, dooe lock should be from top Europians brands. Door closer,

corner cleat, EPDM, drainage cap, PVC inserts all as per MYWINDOW

standars, DOW corning silicon/GE/wackers with SS 304 screws, etc

Architect: ARG Creation Pvt. Ltd. 11 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of Ventilation - window of size 5060 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

77 have minium chromatizing treatment. All hardware should be Euro Groove Smt 10.00 8,347.65

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

78 or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Kg 9747.41 114.44

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS

pipe of 16 gauge, round balustrade of 38mm [50mm 16G Grade 304 with

glossy finish consisting of 38 NB or nearest size vertical posts 900 Height at

maximum spacing 900c/c with suitable cups at bottom and top rail of

NB or nearest size & intermediate rails of 20 NB or nearest size etc

complete] with complete assembly of SS studs to house the horizontal

16mm pipes and top handrail, bend and coupler to be used as per

architectural detail drawings for the railing in parapet, stair etc. including

79 fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in Rmt 132.00 3,563.68

RCC or masonry in true line level and plumb, including complete assembly,

including matt polishing and buffing complete, including scaffolding etc.

complete as directed by EIC.(Actual length of stair railing shall be measured

at site & same shall be paid. No wastage should be measured or paid.)

Providing and fixing in position S.S. daso by providing top 50 mm dia stain

less steel pipe rail with starting and end point vertical post of 50 mm dia

with wall/column including bending welding and fixing for staircase and

balcony as directed.(testing is required of s.s 304) for all floor.

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

in charge.Column ( 122 x 61 x 3.6mm )

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on undecorated wall surface to

82 give an even shade including throughly brushing the surface free from Smt 7634.04 119.49

mortar droppings and other foreign matter and sand papered smooth.

Architect: ARG Creation Pvt. Ltd. 12 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Ceiling painting (two coats) with plastic

emulsion paint of approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly brushing the surface free

83 from mortar droppings and other foreign matter and sand papered smooth. Smt 3721.00 122.67

Extra over item 57 for painting with plastic emulsion paint of approved

brand on ceilings and sloping roofs.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

84 the surface to remove all dirt, and remains of loose powdered materials.etc Smt 2208.00 114.53

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

85 2006 including 35 mm Sand layer for levelling and filling the joint with sand Smt 2070.00 683.88

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid

87 etching with duco color, SS studs 1.5' away from wall.fitting as per dirction Smt 11.00 92,433.18

of Architect and EIC

Providing and fixing 12' height, 1.5" EMBOSSED Mat / polished / colored SS

LETTERS MADE FROM 1mm thick 304 quality SS sheet cut outs on front Per

88 surface, 0.5mm thick Mat / polished / colored 304 quality Sheet for emboss 40.00 1,616.00

Architect: ARG Creation Pvt. Ltd. 13 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity 0.043° w/m

KC.for the best thermal Insulation. The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X

mm to be laid on true horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at joints

to get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made of

mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on periphery walls/partitions

89 on a perimeter wall angle pre-coated steel of size (24X24X3000mm made Sqm 1329.19 1,648.96

of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light weight calcium silicate ceiling tiles

of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting/making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed

to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester baked paint, for

all heights, as per specifications, drawings and as directed by engineer in

charge.Note:- Only calcium silicate false ceiling area will be measured from

wall to wall. No deduction shall be made for exposed frames/opening (cut

outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall

have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and

0.75 NRC for Globe, light reflection 85% non combustible as per B.S.

part IV, 100% humidity resistance and also having thermal conductivity.

fixing the best

layer water Insulation.

proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

90 edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Sqm 555.00 606.95

connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

91 using white cement including rounding off junctions and extending them Smt 1368.00 747.29

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Architect: ARG Creation Pvt. Ltd. 14 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane (ELASTOROOF PU– Sunanda speciality pvt coating ltd

or Equivalent) over uniform surface of slab. Apply 2 coats at dosage of

kgs per sqm to achieve the required minimum DFT of 1.5mm. It should

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Structural glazing- Providing and fixing curtain wall 57x63 woth pressure

plate and cover plate system of jindal make, with 8 mm clear toughen glass

with necessary screws, cleat EPDM rubber gasket with M.S suport wherever

94 required. complete as per Architect concept and as per detailed by Architect Smt 265.00 9,372.80

/ consultant & Directed by EIC

Providing and Sclupture (Material- Fibre) 6-8 ft tall, with proportionately

base dimenstion as per approved design by consultant and complete as per

95 instruction of engineer-in charge and consultant. Job 2.00 1,010,000.00

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

96 shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rmt 287.50 831.22

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make

for drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

97 shall be concealed in wall as directed necessary fittings such as bends, Rmt 230.00 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Architect: ARG Creation Pvt. Ltd. 15 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

103 complete as per the instruction of EIC. (C) 25 mm. Dia Each. 58.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve etc.

104 complete as per the instruction of EIC. (E) 40 mm. Dia Each. 46.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass screw

105 down bib tap polished bright. (i) 15mm dia. Each. 35.00 184.98

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter

with 150 mm X 150mm S.S.jali for floor or nahni trap of the following

nominal diameter of self cleansing design with C.I screed down or hinged

107 grating including the cost of cutting & making good the walls, as per Each. 52.00 525.83

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

108 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each. 12.00 1,279.40

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

collars for culverts carrying heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i) 300mm dia.

Architect: ARG Creation Pvt. Ltd. 16 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete for (i)

Inside dimensions 455mmx 610mm & 450mm deep for single pipe line.

etc. complete as per detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x

mm & 1.5 m deep including R.c.c. cover with frame size 560 mm diameter (

111 A ) with 230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down

high pressure with screw shank & back nuts & rubber plugs, 15mm dia

brass stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection

Pipe of required Size, & testing the same for leak proof, etc. with all material

& labours to complete this job in all respected manners, etc. complete as

per detailed & approved by the consultant & directed by EIC.

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash

down water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet

113 Spray, Health Fauset Heavy duty with hook with fitting, Metropole, Incl. Each. 23.00 5,965.72

Connection and rubber buffers. (A) Vitreous China., etc. complete as per

detailed & approved by the consultant & directed by EIC.

providing and fixing water closet squatting pan(Indian type W.C. pan ) size

580 mm of ESSCO Make including providing and fixing vitreous china

mm size 'P' or 'S' trap including jointing the trap with pan and soil pipe in

CM (1:1) (1 cement :1 fine sand) etc complete. As per instruction given by

114 engineer in charge. (A) Vitreous China., etc. with all material & labours to Each. 7.00 936.96

complete this job in all respected manners, etc. complete as per detailed &

approved by the consultant & directed by EIC.

P/F approved brand Flat Back Urinal of ESSCO Make For Gents Toilet with

15mm Push & stop tap of approved brand including connection the urinal

with rigid pvc nozzle & pvc connection pipes & bottle trap in trap etc.

complete as directed by engineer in charge (A) Crystal White flat back or

115 corner type size 590 mm X 375 mm X 390 mm, etc. with all material & Each. 12.00 1,036.27

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

Architect: ARG Creation Pvt. Ltd. 17 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

plugs with C.P. brass screws & washers, etc. with all material & labours to

116 complete this job in all respected manners, etc. complete as per detailed & Each. 29.00 833.73

approved by the consultant & directed by EIC

Providing & Fixing handicap toilet set with Wall-mounted European Closet &

wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails etc. rubber buffers, C.P nuts, bolts etc making

holes in walls & floors, & finishing for ready to use. The rate includes all

necessary connection charges as per product detail to the satisfaction of

Architect / engr. in-charge where required & the final handing over etc.

117 complete as per specifications, drawings & as directed by the Engineer-in-

charge. The scope includes following items: EWC with seat cover & dual

flush tank & WASH BASIN SET: - CERA 'CRUSE SET' as approved by Architect

/ consultant & Directed by EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, shanks

118 & back nuts. (i) 15mm dia. Each. 34.00 308.73

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

119 painted white including cutting holes in walls and making good the same Each. 2.50 2,280.27

but excluding fittings.

Providing erecting and fixing double coated ISI water tank of required

120 capacity each with all necessary fittings and connection etc. complete on Ltr. 2.00 3.95

Lowering of Submersible pump set complete with required nos and size of

Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling

121 to take the load of the pump set and pipe assembly filled up with water with Job 2.00 2,932.79

trail testing, wiring GEB test report.

Single phase submersible pump motor set with control panel. (c) Motor

122 rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head Set 2.00 21,694.80

suitable for 32 mm dia. delivery pipe, Cat Q- II

123 Flat PVC cable size 4.0 sq.mm Mts. 100.00 85.85

124 HDPE pipe - 40 mm dia. Mts. 100.00 126.25

Providing and fixing in position U.P.V.C. cowl went to pipes. (C) 100mm dia

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight

126 not less than 35Kg. Each. 5.00 958.17

Providing and fixing chromium plated brass half trun flush cock of approved

127 quality including fixing in pipe line etc. complete.(ii) 25mm dia. Each. 30.00 263.77

Contour survey work for prepaing contour maps by taking cross-section at

every 30M. intervals including all, labour materials and instruments. This

item includes the submission of autocad file of total site survey, etc

complete as per detailed, directed & approved by the consultant / EIC

Providing & fixing 1mm thick (Or specified) Designer Laminate of approved

shade and color on plywood, Cement bonded particle board or any surface

129 as per shown in drawing with required adhesive complete as per directed by Sqm 63.00 710.29

Architect and EIC.

Architect: ARG Creation Pvt. Ltd. 18 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing laminate finish partition up to false ceiling ht and Low

height partition (thickness of partition is 82 mm or as specified in drawing)

having 12 mm thick marina plywood IS 710 grade both side on aluminum

framing of gauge 16. Aluminum framing size for vertical & horizontal

support is 50 mm x 25 mm. Grid of aluminum framing is 600 mm x

mm. All exposed surfaces finished with 1 mm thick Laminate of approved

shade complete with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with open

able stud from partition Including all materials and labor etc. Make

necessary grooves as per shown in drawing. Using of 12 mm thick clear

glass with proper crystal edges & with suggested frosted films on glass. All

130 joints are covered with teakwood beading Patti finished with polish Sqm 70.00 6,620.55

matching with laminate. Including door of same design if required

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In charge.

Contractor has to provide all necessary cut outs (race ways.) for Electrical

works & no extra payment shall be made for it.

The works include providing & fixing of Ply Board Ceiling which

Incorporates a fully concealed Aluminum grid. Complete with all necessary

hardware, fittings and accessories. Finish with suggested laminates. The

job also includes providing access panels, cutting of spot lights, luminaries,

speaker, etc. Sheets in size 8’ x 4' Laminates 1 mm in thickness of pattern

shown as per drawings.. ½” (or 3/8”) screwed on steel stud system. The

steel stud frame consisting of main furring Alum channel at every 600 mm

and cross channel at every 600 mm. Both main and cross channels are

attached though jaw clip. Screws will be corrosion proof either Chromised or

Cynated. Screw fixing is done mechanically with drilling machine & suitable

131 attachment. The gaps will be initially filled with jointing compound and then Sqm 97.00 4,399.65

taped by self adhesive covered with proper jointing compound..Contractor

has to provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. Complete as per details given in drawing and as per

instructions of Architect/consultant/Engineer In charge.

CORIAN FINISH TOP TABLE Includign Side Unit (Head Tables)

Providing & fixing work station / table having ht of 750 mm Top, with MS

Pipe Structure of Frame as per Architect/ Engineer Design or Selection and

Back Ply of table is also made up of 19mm Thick. top of Table is Covered

with Wooden Finish Planks or Corian Finish Top as Per Requirement and All

internal & external Joints finished with Burma teak bidding Patti. Bottom Part

of Table is Sectionized with MS Perforated Sheet. All exposed and internal

surfaces covered with Wooden Planks or Corian Finish approved shade &

Complete as per detail drawings & as instructed by Architect/consultant/

132 Engineer In charge. Complete with all necessary hardware like nails, ss Sqm 14.00 38,471.30

screws, table chain, Key board trey, TDS channel, adhesives etc. Contractor

has to provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. Price is including the Side unit, only main table top Sqm

will be measured. All ply should follow IS

Architect: ARG Creation Pvt. Ltd. 19 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Class-1 / Class-2 / Executive Tables / Conference with Side Unit and

Providing & fixing work station / table having ht of 750 mm Top, with

12/19mm thk ply framing or MS Pipe Structure of Frame as per Architect/

Engineer Design or Selection with specified powder coating and Back and

side Ply of table is also made up of 19mm Thick. Top of Table is 19mm thk

ply with laminate Finish Per Requirement and All internal & external Joints

finished with teakwood beading Patti. Common or front Part of Table is

Sectationized with MS Perforated Sheet. All exposed and internal surfaces

covered with Laminate Finish of approved shade & Complete as per detail

133 drawings & as instructed by Architect/consultant/ Engineer In charge. Sqm 79.00 29,350.96

Complete with all necessary hardware like nails, ss screws, table chain, Key

board trey, TDS channel, adhesives etc. Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be made for

it. Price is including the Side unit, only main table top Sqm will be measured.

All ply should follow IS

Staff Tables / Lunch tables / General meeting without drawers

Providing & fixing office table / staff table having ht of 750 mm Top, with

19mm thk plywood or MS pipe Structure as per Architect/ Engineer Design

or Selection and Back and side Ply of table is also made up of 19mm Thick.

Top of Table is 19mm thk ply with laminate Finish Per Requirement and All

internal & external Joints finished with teakwood beading Patti. Item

includes fixing of drawers and keyboard tray and storage with shutters

under table as per drawing. With grooves shown as per drawing. All exposed

and internal surfaces covered with Laminate Finish of approved shade &

134 Complete as per detail drawings & as instructed by Architect/consultant/ Sqm 33.00 27,130.54

Engineer In charge. Complete with all necessary hardware like nails, ss

screws, table chain, TDS channel, adhesives etc. Contractor has to provide

all necessary cut outs for Electrical works & no extra payment shall be made

for it. All ply should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open Front

Side for Selves with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading and Teakwood molding as per design. Back

ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Laminate

& internal surfaces are covered with 1 mm thick laminate. External &

135 internal joints covered with beading Patti complete with polish finish. With Sqm 1.00 10,381.62

grooves shown as per drawing. All complete with proper hardware like, S.S.

Screws, MS Nails, Magnets, cable manager SS 304 etc. All Details as per

shown in detail drawings & as per instructions of architect/consultant / in

charge engineer

Architect: ARG Creation Pvt. Ltd. 20 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete with

proper teakwood beading. and Teakwood molding as per design. Back ply is

12 mm Marin ply. All exposed are covered with 1 mm thick Laminate &

internal surfaces are covered with 1 mm thick laminate. External & internal

136 joints covered with beading Patti complete with Polish finish. With grooves Sqm 250.00 13,815.77

shown as per drawing All complete with proper hardware like locks, S.S.

Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of

250 mm and 100 mm dia etc. All Details as per shown in detail drawings &

as per instructions of architect/consultant / in charge engineer

Notice Board / Pin Board

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing

137 Arrangement complete as per drawing and Directed by Engineer In Charge Nos 30.00 7,259.38

Providing and fixing 3 Seater benches of powder coated and chrome plated

138 MS sections. With PU pads on seat Nos 65.00 10,100.00

Supplying and providing High Back leatherite office Chair (Type-1) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

139 -360 swivel motion/ 100mm stroke gas Nos 8.00 18,180.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing High Back leatherite office Chair (Type-2) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

140 -360 swivel motion/ 100mm stroke gas Nos 18.00 16,160.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back leatherite office Chair (Type-1) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

141 -360 swivel motion/ 100mm stroke gas Nos 81.00 14,645.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back leatherite office Chair (Type-2) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

142 -360 swivel motion/ 100mm stroke gas Nos 80.00 12,120.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Architect: ARG Creation Pvt. Ltd. 21 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift

143 -PP Fixed Arm rest Nos 92.00 5,024.65

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Waiting Sofa (One Seater) : @ 900(L) x 870 mm (B) x 800 mm (H)

comprising up of Solid teak wood with PU semi gloss finished polish. The

seat shall 150 mm th 40 density & back shall be 32 density foam &

finished in Approved fabric upholstery as per the drawing/image and

instruction from Architect/EIC all external & internal exposed woodwork to

be finished in PU semi gloss finish polish. .The work shall be done as per

drawing , specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item inclusive of all

144 material, labour, wastages, necessary tools & tackles, approved make for all Nos 5.00 16,551.38

floors, all heights, all levels and all places within campus. Contractor shall

do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this. Rate shall inclusive of providing mockup

sample for approval of architect. Basic rate of fabric 800/ Rmt

Waiting Sofa (Two Seater) : @ 1500(L) x 870 mm (B) x 800 mm (H)

specification for complete work .

Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x 800 mm (H)

146 specification for complete work . Nos 15.00 35,861.31

Center Table:750 x 750x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top including

rubber buffers and wooden legs at the bottom of table, , including all type

147 of hardware, fittings, fixtures , tools , tackles , etc complete as per detailed Nos 23.00 26,133.75

drawing. The work shall be done as per the specifications, sample

approved and as directed by the Architect and Engineer-in-charge.

Side Table:450 x 750x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top including

rubber buffers and wooden legs at the bottom of table, , including all type

148 of hardware, fittings, fixtures , tools , tackles , etc complete as per detailed Nos 47.00 13,066.88

drawing. The work shall be done as per the specifications, sample

approved and as directed by the Architect and Engineer-in-charge.

Supplying and providing dust bin made of 100% virgin plastic with paddle.

149 Capacity-10 to 15 Ltr. Nos 100.00 557.52

Supplying and providing dust bin made of 100% virgin plastic with paddle.

150 Capacity-120 L Nos 5.00 1,568.03

Architect: ARG Creation Pvt. Ltd. 22 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch with

speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and warranty etc

as per manufacturer’s specifications. Fabric to be as per approved sample.

All the work complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC with

Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Openness

Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar reflection (white)

65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Strength

(Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN,

Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire

Retardancy:B-s2,d0/EN 13501-1. All complete as per approval of designer

& instruction of Project Manager. (The mode of Measurement: The size of

the blind will be measured from end to end bracket (Left to Right bracket) &

height will be measured from top of the pelmet till the bottom of the bottom

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with

proportionately base dimenstion as per approved design by client and

152 complete as per instruction of engineer-in charge and consultant. Nos 1.00 150,995.00

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame

153 of size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing Nos 300.00 4,065.25

and 5mm thick glass on top if required.

Supply and Installation of 55'' LED Display.

Providing and supplying 55" LED smart TV with 7 Series,17.2 Kg,3840 x

2160 Pixelsmp3,audio Wattage 20 Watts,4K series (Resolution: 3840 x

2160p), Refresh Rate: 120 hertz --Connectivity - Input: 3*HDMI, 2*USB,

154 Warranty Information: 1 year, Product Dimensions 6 x 123.9 x 71.4 cm, Nos 23.00 90,900.00

make with need hardware hang on wall paneling obs are included all taxes,

as directed by engineer and architect.

Supply and Installation of 75'' LED Display. Samsung Ultra HD (4K) LED

155 Smart TV, model - UA75NU7100KXXL, Sound output 20 W. Nos 3.00 131,300.00

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid

156 etching with duco color, SS studs 1.5' away from wall.fitting as per dirction Sqm 9.00 92,433.18

of Architect and EIC

Providing and Fixing Name in Gujarati Letter SS304 1mm thick letter 1.5"

157 depth 10" Height with Duco color & fitting as per direction of Architect & EIC. Job 1.00 52,520.00

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

158 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas Nos 16.00 35,217.00

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (A) for 0.8 to

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

159 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas Nos 3.00 41,312.00

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton

Architect: ARG Creation Pvt. Ltd. 23 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

160 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas Nos 22.00 51,155.00

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to

Providing and erecting approved make Cassette type split air-conditioning

unit consisting of condensing unit with fan motor, hermetically sealed

scroll/rotary compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories by Eco

161 friendly Green gas charging & Internal copper wiring & Remote control ( 3 Nos 4.00 91,739.00

star and above of current year) with necessary core cutting. (D) for 3 ton

capacity- 1/3Phase

Supplying & installing MS standard type stand mounting for outdoor unit of

162 Split A.C. upto 4 TR capacity erected with necessary hardware materials as Nos 4.00 739.00

Supplying and erecting insulated pair of soft copper tubing open or

163 concealed including power and control cable,necessary PVC drain pipes for RMT 500.00 956.00

Split AC machine up to 4 TR capacity

Supplying and installing MS angle , powder coated / Painted standard type

of wall/floor stand mount for outdoor unit of split AC of following capacity,

164 erected with necessary hardware materials as directed. Nos 41.00 1,348.00

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll Compressor(s),

microprocessor based Controller, top discharge type condensing unit(s),

with R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration

isolators, with suitable foundation, MS Stand for Unit with necessary paint

etc. complete as required. The unit shall deliver the rated capacity at AHRI

Conditions and work even at 50°C ambient temperature without tripping.

The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC

power supply. The unit shall be filled with first charge of the refrigerant and HP

ready for use as required. The COP at AHRI conditions shall not be less than

3.1 and IEER not less than 6.5. (Design should be got approval before

execution from engineer in charge)

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per

166 TR(minimum) complete, as required. The unit shall have automatic force NOS 6.00 29,333.00

shut down provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of

Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System (F) 2.4 TR

Architect: ARG Creation Pvt. Ltd. 24 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per

167 TR(minimum) complete, as required. The unit shall have automatic force NOS 5.00 30,460.00

shut down provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of

Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System (H) 3.2 TR

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per

168 TR(minimum) complete, as required. The unit shall have automatic force NOS 8.00 31,606.00

shut down provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of

Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System (J) 4 TR

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable synthetic

media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm

/dynamically balanced blower, multispeed motor, coil section with DX

copper coil, electronic expansion valve, outer cabinet, cord less remote

control, drain pan, necessary accessories etc., suitable for operation on

V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air

inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (D)

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable synthetic

media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm

/dynamically balanced blower, multispeed motor, coil section with DX

copper coil, electronic expansion valve, outer cabinet, cord less remote

control, drain pan, necessary accessories etc., suitable for operation on

V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air

inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (E)

Architect: ARG Creation Pvt. Ltd. 25 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

171 thickness as given below for Suction and Liquid lines, all accessories as per RMT 140.00 267.00

specifications etc with necessary refrigerant joint as required : (A) 6.4 mm

dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

172 thickness as given below for Suction and Liquid lines, all accessories as per RMT 200.00 367.00

specifications etc with necessary refrigerant joint as required : (B) 9.5 mm

dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

173 thickness as given below for Suction and Liquid lines, all accessories as per RMT 100.00 506.00

specifications etc with necessary refrigerant joint as required : (C.) 12.7 mm

dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

174 thickness as given below for Suction and Liquid lines, all accessories as per RMT 100.00 658.00

specifications etc with necessary refrigerant joint as required : (D)

mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

175 thickness as given below for Suction and Liquid lines, all accessories as per RMT 100.00 776.00

specifications etc with necessary refrigerant joint as required : (E) 19 mm

dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Architect: ARG Creation Pvt. Ltd. 26 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

176 thickness as given below for Suction and Liquid lines, all accessories as per RMT 100.00 953.00

specifications etc with necessary refrigerant joint as required : (F) 22.2 mm

dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

177 thickness as given below for Suction and Liquid lines, all accessories as per RMT 20.00 1,124.00

specifications etc with necessary refrigerant joint as required :(G) 25.4 mm

dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

178 thickness as given below for Suction and Liquid lines, all accessories as per RMT 100.00 1,191.00

specifications etc with necessary refrigerant joint as required :(H) 28.58 mm

dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

179 thickness as given below for Suction and Liquid lines, all accessories as per RMT 60.00 1,249.00

specifications etc with necessary refrigerant joint as required :(I) 31.8 mm

dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

180 thickness as given below for Suction and Liquid lines, all accessories as per RMT 20.00 1,313.00

specifications etc with necessary refrigerant joint as required :(J) 34.9 mm

dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick

Architect: ARG Creation Pvt. Ltd. 27 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of specified

181 thickness as given below for Suction and Liquid lines, all accessories as per RMT 60.00 1,427.00

specifications etc with necessary refrigerant joint as required :(L) 41.27 mm

dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick

Supply installation testing commissioning Shielded Shielded Control Cables

for VRV System with necessary ISI mark Medium class rigid PVC pipes with

necessary accessories with termination in machine and control equipments.

(B) 3C X 1.5 Sq mm Shielded Armoured

Central Control System, (A) Cord type remote control with thermostat, LED

183 Display and internal wiring for Cassette, FCU & CSU NOS 1.00 1,836.00

Central Control System, (A) Cord type remote control with thermostat, LED

Display and internal wiring for Cassette, FCU & CSU Per

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber per

185 insulation. 120.00 916.00

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

186 insulation. (C.) 32mm dia. RMT 100.00 87.00

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

187 insulation. (E) 19 mm dia. RMT 400.00 67.00

providing and erecting Highly flexible, fibre free insulation laminated with

an embossed silver-colour foil for enhanced aesthetic and mechanical

protection. The closed cell insulation material with superior performance in

fire safety and maintenance is used for the protection of HVAC ducts,

especially in the clean room conditions of pharmaceuticals industries.

• Pre-covered insulation with excellent aesthetics Per

188 • Low Thermal Conductivity, λ0°C ≤ 0.035 W/(m·K) Sq.m 700.00 684.00

• Excellent Water vapour Diffusion Resistance, µ ≥ 60,000 m

• Easy to clean and maintain

• Class 0 fire classification to BS 476 part 6 &

• Durable and high resistance to mechanical abuse

PUMP Supplying, installation, testing and commissioning of electric driven

Main Fire Pump suitable for automatic operation and consisting of following,

complete in all respects, as required : (a) Horizontal type, multistage,

centrifugal, split casing pump of cast iron body & bronze impeller with

stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable

HP Squirrel cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts,

3 phase 50 Hz, AC supply with IP 55 protection for enclosure,

189 horizontal foot mounted type with Class-'F' insulation, conforming to IS-

325. (c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. (d) Suitable cement concrete

foundation duly plastered with anti vibration pads. 1.1 2850 lpm at 88 m

Architect: ARG Creation Pvt. Ltd. 28 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump) Horizontal

type, multistage, centrifugal pump of cast iron body and bronze impeller

with stainless steel shaft, mechanical seal conforming to IS :

Suitable HP squirrel cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

190 conforming to IS : 325. M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required. Suitable cement

concrete foundation duly plastered and with anti vibration pads. 3.1

lpm at 88 m Head.

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and

consisting of following, complete in all respects, as required : (Diesel

Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete with

auto starting mechanism, 12 /24 volts electric starting equipment, diesel

tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and

191 protection as per standard specification, stop solenoid for auto stop No. 1.00 538,739.13

in the event of fault with audio indications, painted with post office

red colour etc. as required. M.S fabricated, common base plate,

coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

2.7 1620 lpm at 88 m Head

Fabrication, supply, Installation testing & commissioning of Electrical control

panel of cubical construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged lockable doors, dust

and vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, interconnection with suitable size copper

conductor cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering etc. complete

in all respect, suitable for main fire pump, pressurisation pump & diesel

pump set complete as per CPWD specification with following in coming and

outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac supply

with enclosure protection class IP 42 as required : 5.1 INCOMING - 400A,

192 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with No. 1.00 318,497.51

selector switch Digital Ammeter (0-400 A) with selector switch & CTs

etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating

lamps Set of Copper Bus Bar 300A. OUTGOING (Note : All outgoing

feeders for pumps should have digital Ammeter with selector switches

and LED type ON, OFF, trip indicating lamps)

193 Supply of 12 V Battery, Coolant, Engine Oil and Diesel Tank. Set 1.00 29,957.63

Supplying and fixing of Air Vessel made of 250mm dia., 8mm thick MS

sheet, 1200mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25mm dia. gun metal wheel

194 valve with required accessories, pressure guage and painting with No. 1.00 15,615.63

synthetic enamel paint of approved shade as required.

Architect: ARG Creation Pvt. Ltd. 29 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 200mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.150 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.100 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 80 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 50 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 40 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 25 mm dia.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required. 100mm

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required. 80 mm dia.

Architect: ARG Creation Pvt. Ltd. 30 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required 150 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

205 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 3.00 7,669.15

sizes : 150 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

206 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 1.00 5,706.50

sizes : 100 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

207 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 1.00 4,264.25

sizes : 80 mm dia.

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

208 bolts, nuts, washers etc. as required : 150 mm dia. No. 3.00 15,223.61

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

209 bolts, nuts, washers etc. as required : 100 mm dia. No. 1.00 9,458.05

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

210 bolts, nuts, washers etc. as required : 80 mm dia. No. 1.00 6,582.98

Supply, Installation, Testing and Commissioning of Gun Metal Air

211 Release Valve with necessary fittings. Size: 25 mm dia. No. 6.00 1,069.91

Supply, Installation, Testing and Commissioning of 100 mm dia.

Pressure Gauge (for all pipes) of range 0 - 15 Kg/cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast aluminium,

stove enameled, black, weather proof case with outer, screwed

212 aluminium bezel and complete with necessary U-type stainless steel No. 3.00 1,198.30

siphon tube and cock including providing suitably painted angle iron

support to the tube etc. as per required.

Providing and fixing of pressure switch in M.S. pipe line including

213 connection etc. as required. No. 3.00 1,323.27

Pump house Cabling : Providing, fixing, testing & commissioning of

214 Sq.mm. 3 Core Alluminium Armoured Cable of required size from Panel to Rmt 300.00 333.82

Providing, installation, testing & commissioning of Y Type Strainer

215 fabricated out of 1.6mm thick stainless steel, grade 304, sheet with 3 mm No. 3.00 9,538.51

dia. holes with stainless steel flange. 150mm

Supplying and fixing Single headed internal Fire Hydrant Valve with

instantaneous stainless steel coupling of 63mm dia. with cast iron

216 wheel ISI marked conforming to IS:5290 (Type-A) with blank cap and No. 14.00 5,254.57

chain required.

Supplying and fixing of 63 mm dia. Gun metal short branch pipe with

mm nominal internal diameter size nozzle conforming to IS 903, suitable

217 for instantaneous connection to inter connect hose pipe coupling as No. 14.00 2,067.93

required. Gun metal.

Supplying and fixing of 63 mm dia., 15 m long RRL hose pipe with 63 mm

dia. male and female coupling duly bound with G.I. wire, rivets etc.

218 conforming to IS 636 (Type-A) as required. Gun metal. No. 14.00 4,452.55

Architect: ARG Creation Pvt. Ltd. 31 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, Installation, Testing and Commissioning of Weather proof

Standard Fire Hose Cabinet wall mounting type (750 mm x 600 mm x

250 mm deep) having single or double opening with necessary locking

arrangement by allan key suitable for housing 2 nos. hose pipe, 1 no.

branch pipe & nozzle spanner.

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

220 chain as required for suitable dia. M.S. pipe connection conforming to Set 1.00 11,960.79

IS:904 as required : 4 way 150mm.

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

chain as required for suitable dia. M.S. pipe connection conforming to

IS:904 as required : 4 way 100mm dia.

Supply and fixing First Aid Hose Reel with M.S. construction spray painted

with P.O. red, conforming to IS:884 complete with the following as

required. 20mm nominal internal dia. water hose thermoplastic

(textile reinforced) type-2 as per IS:12585, 20mm nominal internal dia.

222 gun metal globe valve and nozzle, drum and brackets for fixing the No. 11.00 7,425.21

equipment on the wall. Connection from riser with 25mm dia. stop gun

metal valve & MS pipe and socket. 30 mtr.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Powered loop Manual Call point with built-in Fault

isolator, housing & glass - red. Item as per drawing and

specification, as approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Bus supplied Power Loop Sounder with built-in flasher,

8 Different Selectable Tones. Shall have a 'soft start' feature controlled

224 by the fire alarm panel. Item as per drawing and specification, as No. 6.00 4,040.00

approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Four Loop Addressable Intelligent Main Fire Alarm

control panel with operating front panel with network card, Keypad

300 characters & Multi lines alphanumeric display, 10,000 events

memory, On board Printer interface for external printer, battery backup.

Item as per drawing and specification, as approved by Electrical Engineer in

Supplying and laying of 2 x 1.5 sq.mm fire alarm armoured cable

600 / 1000 V rated with annealed copper conductor having XLPE

226 insulation, steel wire armouring & FRLS outer sheath complete as required. Rmt 500.00 148.08

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Below False Ceiling Addressable ideal optical smoke

detector for detecting visible smoke particles with mounting base. Item as

per drawing and specification, as approved by Electrical Engineer in

Providing, fixing, testing & commissioning of 15mm dia. quartxoid

228 bulb type sprinklers of rating 68 degree centigrade with required No. 150.00 446.79

accessories : Pendent sprinkler.

Providing & fixing photo luminescent Signage's as per IS standard in Block /

Small Letters on rigid sheet with necessary wall or Ceiling fittings as

229 specified Sizes : For Fire Extinguisher, Exit, Do not to do etc. No. 60.00 226.83

Supply, installation, testing and commissioning of ABC type 6 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

230 required accessories including wall suspension brackets. No. 8.00 1,369.49

Architect: ARG Creation Pvt. Ltd. 32 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked

/ TAC approved fitted with required accessories including wall

suspension brackets.

Supply, installation, testing and commissioning of Modular ABC type 5 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

232 required accessories including wall suspension brackets. No. 4.00 1,369.49

Supply, installation, testing and commissioning of Stainless Steel Ball

233 Valve. (a) 25mm dia. No. 11.00 1,155.51

Supplying, Installing, Testing & Commissioning of M.S. structural steel

234 support. Kg 450.00 81.32

Supply, Installing, Testing and Commissioning of C.I. heavy duty

foot valve with flanges, nut bolts, gaskets etc. with necessary

235 complete accessories. 150 mm dia. No. 1.00 14,122.88

Supply, Installing, Testing and Commissioning of C.I. heavy duty foot

236 valve with flanges, nut bolts, gaskets etc. with necessary complete No. 2.00 10,472.33

accessories. 100 mm dia.

Point wiring in Copper (Modular)--Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.--(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in / flushed on wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.--Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary Point.--(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat-III

Architect: ARG Creation Pvt. Ltd. 33 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per

240 pipe erected with following type of accessories.--[I] For 6A Plug and 6 a Pt. 250.00 553.00

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board-

-(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per

241 pipe erected with following type of accessories.--[II] For 16A Plug and 16 Pt. 60.00 815.00

amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.--(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories.--Single mounting base-frame & Textured /

Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling ,complete with 6A Modular type

switches and following type of accessories erected on PVC / Metallic box,

single mounting base frame covered with textured / metallic front plate

243 modules erected on / in wall / ceiling as per pipe erected. with necessary Pt. 75.00 653.00

batten/angle holder or ceiling rose or H.D.Connector as directed.--(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete--Cat-III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

244 per site situation directed by Engineer In charge. --(3) Two Pin/RJ-11 Ea. 100.00 178.00

Telephone Socket-- [A] For One Gang Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge

(7) Blank Plate Single Cat-III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

246 per site situation directed by Engineer In charge.--(8) Computer RJ-45 Ea. 100.00 178.00

socket . cat-lll

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed--b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

248 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 Mtr. 1500.00 23.00

Architect: ARG Creation Pvt. Ltd. 34 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Mains & Wires--Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

249 FRLS PVC insulated stranded wire of green colour for earth continuity of Mtr. 15000.00 68.00

following size (a) with medium class Rigid PVC pipe and accessories--(a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (general

wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

251 green colour for earth continuity of following size (FRLS) (a) with medium Mtr. 500.00 123.00

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

252 insulated stranded wire of green colour for earth continuity of following size Mtr. 100.00 162.00

(A) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

253 or in existing trench / pipe of following size of cables --(B) 3 1/2 core 35 Mtr. 100.00 252.00

Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

254 or in existing trench / pipe of following size of cables (c) 4 core 10 Sq. mm Mtr. 250.00 294.00

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

255 or in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm Mtr. 200.00 175.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

256 insulating tape etc for following size of cables.--(A) 2 to 4 core 2.5 / 4 Sq. Ea. 40.00 37.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

257 insulating tape etc for following size of cables. --(c) 2 to 4 core 10 Sq. mm Ea. 50.00 43.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

258 insulating tape etc for following size of cables. (D) 2 to 4 core 16 Sq. mm Ea. 30.00 54.00

Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

261 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 50.00 9.00

manner. (A) 1.5/2.5 to 6 Sq.mm

Architect: ARG Creation Pvt. Ltd. 35 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing

262 box. confirming to IS 8828/1996 with ISI Mark(QTY FOR MCB OF DB AND Ea. 100.00 130.00

MCB OF PANEL) Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also

consider in general) (A) 6-32 Amp Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

264 having following capacity. Ea. 6.00 860.00

(c)63 Amp. Cat III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for--(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI)--(b) sheet steel

double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for --(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43) (iii)8 way

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of quick

267 action & tripping with all advance feature & do not incorporate any Ea. 18.00 2,300.00

electronic component.for following Max. rating erected as directed (i)

Amps.DP Cat-III

Providing and erecting MAIN LT PANEL-Incoming :200 amps FP MCCB (16

KA) with following accessories: 1 Set MCCB ON / OFF / TRIP indicating lights

with control MCB’s. Under voltage release 3 Nos. of 0-200/ 5 amps CTR

digital VAF with 3 nos 200/ 5 amps, 15 VA Class 0.5 CT’s.--Digital type 0-

500 Volt digital voltmeter with inbuilt selector switch & shall be protected by

2 amp TP MCB’s--Bus Bars 200amps FP aluminium bus bars with coloured

heat shrinkable insulated sleeve.--Outgoing All the outgoing should be

provided with RYB - On - Off - Trip I/L . ( For MCCB only )

268 80 amps 4 pole MCCB ( 10 KA ) : 6 Nos.--32 amps 4 pole MCB ( 10 KA ) :

Nos.--80 amps 4 pole MCB ( 10 KA ) 2 Nos.--25 amps 4 pole MCB ( 10 KA

): 2 Nos.--Astronomical Digital time switch : 2 No.

Providing and erecting the MSP-1--Incoming :--80 amps FP MCCB (16 KA)

with following accessories: 1 Set Breaker ON / OFF / TRIP indicating lights

with control MCB’s.--Under voltage release--3 Nos. of 0-80/ 5 amps CTR

digital VAF with 3 nos 80/ 5 amps, 15 VA Class 0.5 CT’s.--Digital type 0-

500 Volt digital voltmeter with inbuilt selector switch & shall be protected by

2 amp TP MCB’s--Bus Bars 80 amps FP aluminium bus bars with coloured

heat shrinkable insulated sleeve. Outgoing All the outgoing should be

provided with RYB - On - Off - Trip I/L . ( For MCCB only ) 63 amps 4 pole

MCB ( 10 KA ) : 2Nos. 32 amps 4 pole MCB ( 10 KA ) : 3 Nos. Astronomical

Digital time switch : 1 No.--WITH 5/15 A PLUG POINT -5NOS.--IP 55 for

Architect: ARG Creation Pvt. Ltd. 36 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providng and erecting Approved make energy meter 3 phase 4 wire

unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific

Integral Circuits) digital technology with accuracy Class - 1 , temper proof,

free from effect of external magnetic field with 3 phase indication, earth &

270 impulse indication, 6 digit electro mechanical impulse counter, suitable Ea. 1.00 3,150.00

work on 120 V to 300V per phase 45-55 HZ, housed in robust enclosure

with erection as directed. Cat. III

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erection to

work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

271 Section Pillar inside and out side with three tank powder coated paint. Ea. 1.00 4,200.00

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm section

pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long

made from 35 X 35 X 5 mm thick MS angle.

Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following along with shunt trip

272 220V AC. with all internal connections & complete erected in existing Ea. 1.00 6,325.00

M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

273 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 100.00 886.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20(iv) 22-36 watts, Surge-2 KV (Basement)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

274 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 680.00 2,096.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B) LED Panel Light

with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV (Building)

Architect: ARG Creation Pvt. Ltd. 37 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

275 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 670.00 845.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B) LED Panel Light

with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (v) 24 watts, 12" x 12" , Surge-2 KV (Building)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %,--CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,--LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

276 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may Ea. 55.00 688.00

select any wattage capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-lll (Toilet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name --

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %--(

277 fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 30.00 363.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(H) Mirror Light

Watts, wall mounted minimum 1 feet long

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

278 cm. down rod erected with earthing.(Make shall be approved by Engineer in EA. 100.00 2,275.00

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

279 M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with EA. 100.00 125.00

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame. 200mm

with 1350RPM. Cat-II

Architect: ARG Creation Pvt. Ltd. 38 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

282 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have mtr 330.00 157.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) Stip /Rope light

(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non integral

suitable Driver complete cat:III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

283 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 40.00 1,129.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) Spot Light / Focus

(ii) 12 Watts Cat-lll

Supplying & Fixing of LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 85 %, CCT 3000 K to 4000K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA /

284 SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings Ea. 56.00 5,630.00

required LM-79 & LM-80 certificates)(C) Post Top Lantern LED fitting

comprises of Copper dust finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block. IP

Architect: ARG Creation Pvt. Ltd. 39 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin

polyester/epoxy resin system having minimum glass content 45.0%.The

pole should be in one pieceand tapered round in shape,having smooth

outside surface finish and should be totally fre from corrosion as well as

non conductive and shock proof. Pole should be provided with FRP/GRP

base bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint. Pole should

mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption

(ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa,

Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be UV

resistance and pigmented. Pole should be painted with first coat of epoxy

primer and then two coat of highly weather resistance polyurethen paint to

ensure proper addhesion of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than 10.0 % of the

285 length of the pole for the given load.Pole should be generally made as per - 10.00 13,490.00

the dimensional data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory accessories.The size

of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site requirement . (1) 'A'

class frp/grp pole suitable for base plate mounting [C] Overall Length of

meter, Average thickness : 5mm, Top/Bottom Outside Dia. 76/160mm

+/‐2.Weight of Pole 17.0 Kg approx. (Without base) Metal Anchor Base dully

frp claded (Size : 310 Ø * 12mmthk , Mounting hole PCD 260mm * 4 nos. of

Supplying & Fixing of LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 85 %, CCT 3000 K to 4000K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver

286 efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / Ea. 80.00 6,028.00

SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings

required LM-79 & LM-80 certificates)(B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (iii) Above 60 to 90 watts. Cat III

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the projector

should have auto vertical key stone correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the projector should have optical lens, throw

ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector should have features like AV mute

slide, quick corner and split function and should support wireless

functionality with inbuilt wifi or wifi dongle. [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen,

288 Aspect Ratio-4:3 [Approved by Competent Authority i.e. not Below the Ea. 3.00 3,947.00

rank of Executive Engineer ]

Architect: ARG Creation Pvt. Ltd. 40 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting required size HOT deep Galvanised iron strip for

289 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg. 200.00 90.00

Providing and erecting required size Copper strip for earthing of H.T. OCB /

290 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 50.00 928.00

Providing and erecting HOT deep Galvanised iron strip wire 8 to

291 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 200.00 90.00

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

292 for safe earthing device. Ea. 10.00 825.00

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V(c) For Electrical Installation covering Transformer

293 Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer Ea. 6.00 8,288.00

System(like Automation, SCADA) i.e independent Earthing in normal soil. [B]

For Electrical installation up to 11 KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.--Length of Pipe : 2 mtr --Back filling

Compound :1 no. Bag of 25 Kg.

Supplying & erecting approved make LAN cable of following size in existing

294 pipe as per direction. [C] CAT - 6 Mtr. 2000.00 51.00

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge (19) Modular Indicating Call Bell.Cat.III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge

(20) Modular Buzzer.Cat.III

8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of

297 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached Ea. 2.00 1,460,178.00

herewith. Prem. Cat.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

298 clamps or in existing trench / pipe of following size of cables(B) 4 core 6 Mtr. 52.00 143.00

Architect: ARG Creation Pvt. Ltd. 41 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water

cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder head to cover, joint

cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust piping of required length, standard

wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase,

0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

299 with voltage regulation +/- 5% of rated voltage from no load to full load. set 1.00 3,796,450.00

Both the engine and alternator fitted on a common fabricated steel base

plate with antivibration mounting engine and alternator both connected

to each other by flexible flange coupling and with floor/wall mounted

control panel box comprising of voltmeter ammeter, selector switches,

ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with

HRC fuses. The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam

of 40 Density - at least 40 mm. The resin bonded rockwool covered from

inside the canopy by perforated sheet with 3/4 mm holes, sound level not

more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection,

commissioning and satisfactory testing as per requirement with first filling

of fuel, oil, etc. with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from Electrical Inspector.

The Capacity and Ratings of DG sets are as below.(V) Continuous rating of

500 KVA ,BHP not less than 600 BHP

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for

mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage

monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.3)

300 Protection module: The engine shutdown in the unlikely event of Low lube Ea. 1.00 517,937.00

oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery

The AMF Panel of following capacity (G) AMF Control Panel for 500 KVA

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of

cables.(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

302 with out going tails, insulating tape etc for following size of cables.(E) 3 & Ea. 6.00 163.00

1/2 core 120 Sq. mm

Architect: ARG Creation Pvt. Ltd. 42 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & erecting approved make ATS panel suitable for following size of

3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as

detailed below:

1) Power module: Motorised Changeover switch with ATS controller,

Auxiliary contactor with NO & NC contacts with Automatic Battery Charger,

303 indicating lamps for Generator ON, Mains ON, Load and suitable control Ea. 1.00 210,000.00

terminals and power terminals with neutral earthing studs. (H) ATS Panel for

320 KVA/ 380 / 400 /500 KVA3 ph DG Set

Providing & Erecting full SS Body (SS 304) Split type water cooler having

storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr.

Per hour @ an ambient temp of 350 C.The outlet temp. of the water should

drop by 150C within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A, fan motor,

Copper Condensing unit with company fabricated Outdoor Unit water tank

surrounded by evaporating coil, thermostats, relay etc.complete with

necessary copper tube & Insulation, M.S Chanel Stand with Painting for

water tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for

Supplying, installing, testing, and commissioning of three-phase servo-

controlled automatic voltage stabilizer, rated for 60 kVA, suitable for input

voltage range 300–480V AC, 3-phase, 4-wire, 50 Hz, with a regulated

output voltage of 415V ±3%, featuring step-less correction, digital display

for voltage/current, manual bypass switch, forced air cooling, and complete

protection against over-voltage, under-voltage, overload, short-circuit, and

305 time-delay start-up, mounted in an IP42 enclosure with terminal Ea. 1.00 183,000.00

connections, all wiring, and commissioning as per manufacturer guidelines

and relevant IEC standards, including stabilization efficiency not less than

97% at full load.

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode”

management user interface 65W PoE budget [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

307 [Approved by Competent Authority i.e. not Below the rank of Executive Ea. 8.00 4,400.57

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U'

308 Snag less [Approved by Competent Authority i.e. not Below the rank of Ea. 120.00 200.99

Executive Engineer ]

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output

230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage

309 output with over load & short circuit protection equipment. The system Ea. 4.00 29,616.23

housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for

momentary load.(A) 1 KVA with 1Hr Backup

SITC of 9U Network Rack for Network switch, Jack panel consisting of mains

310 panel, fan tray for ventilation, power distribution, cable channel etc as Ea. 8.00 14,645.00

Architect: ARG Creation Pvt. Ltd. 43 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, Testing & Commissioning of Indoor / Outdoor

MP IP Dome Camera of 1/2.8" Progressive CMOS Sensor with

resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field of

View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30 Mtr Smart IR Min.

Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise

Reduction ; Compression Technology H.265, H.264, MJPEG with

311 simultaneous streams ; S/N Ratio 51.5 dB Dynamic Range 110 dB Ea. 20.00 24,997.50

WDR; two way Audio ; on board SD/SDHC/SDXC card slot ; P-iris Lens &

Digital Image Stabilization ; ONVIF IP43, CE, FCC Class A, UL listed with all

required accessories.

Supply, Installation, Testing & Commissioning of Indoor / Outdoor

MP IP Bullet Camera of 1/2.8" Progressive CMOS Sensor with Night Vision

and with resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3-

mm Field of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30/50

Mtr Smart IR Min. Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4

(B/W) 3D Noise Reduction ; Compression Technology H.265, H.264,

MJPEG with 3 simultaneous streams ; S/N Ratio 51.5 dB Dynamic

Range 110 dB WDR; two way Audio ; on board

SD/SDHC/SDXC card slot ; P-iris Lens & Digital Image Stabilization ;

ONVIF IP66, IK10, CE, FCC Class A, UL listed with all required

Supply, Installation, Testing and Commissioning of 8TB Surveillance

313 HDD recording storage Ea. 2.00 29,452.61

Supply, Installation, Testing and Commissioning of 55'' Full HD

314 Resolution Output Display with 2 Port HDMI-VGA-Wall Mount Stand And Ea. 1.00 84,935.95

Supply, Installation, Testing and Commissioning of Network Video

Recorder with maximum 64 IP Cameras, up-to 6 HDD slots,

simultaneous 1/4/9/16 channels playback and H.265+ / H.265 / H.264

recording supported. (FOR CONNECTING ALL THE IP CAMERA)

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

316 LED Meter :5 LED Arrays Ea. 4.00 11,298.87

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections. [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

Supplying and erecting Weather & Dust resistant sound column with

Aluminium case & Aluminium mesh grille with foam layer under grill, rotary-

switch for selecting power taps / impedance having frequency response

150-20000 Hz with following specifications . [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ] (a) With 4 speakers,

317 capacity of power handling 45W (MAX) & 30 W RMS, each speaker have Ea. 25.00 2,055.35

impedance of respectively 300 ohms / 30 W, 500ohms/20W,I -K.ohms/10

W, 2K. ohms / 5W.

Supplying and erecting Weather & Dust resistant sound column with

Aluminium case & Aluminium mesh grille with foam layer under grill, rotary-

switch for selecting power taps / impedance having frequency response

150-20000 Hz with following specifications . [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ] (b) With 2 speakers

318 having power handling capacity of 23W(MAX) & 15 W (RMS), each speaker Ea. 5.00 1,370.57

have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms

Architect: ARG Creation Pvt. Ltd. 44 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, Installing & testing approved make highly sensitive microphone

capable to pick up weak sound from longer distance & wider area suitable

for stage shows, group singing with frequency response 50 - 16000 Hz.

Having sensitivity of 1.6MV / Pa & impedance 250 ohms (Lo -Z),

319 Supplied with quick detachable holder & 10 mtr. twin core cable & 3 pin XLR Ea. 2.00 2,740.13

connector. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Liaisoning work for additional load for requirement, electrical power

320 connection charges and inspector approval for power(to be paid to concern - 1.00 25,000.00

electrical power supplier company)

Total Amount Rs. =

Total Amount Rs. =

Rupees Sixteen Crore Fourty Seven lakh Thirteen Thousand Five Hundred Three and zero paisa.

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Contractor have to dismental all the structure which cause obstruction at site to complete the project &

4 credit of dismental materails of amount Rs. 5,00,000.00 must be recovered from first RA billl of contractor.

Architect: ARG Creation Pvt. Ltd. 45 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Signature of Contractor with Seal Signature of Contracting Authority with Seal

Architect: ARG Creation Pvt. Ltd. 46 of