Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 CrAccepted-AOC | ₹23.6 Cr | L1 | Accepted-AOC Accepted due to lowest rates bidder L1 |
| 2 | L2₹23.9 CrRejected-AOC VILLAGE PO DHUSSARA TEHSIL AMB DISTRICT UNA HP 602489 | UNA | UNA | HP | 602489 | ₹23.9 Cr | L2 | Rejected-AOC Rejected due to higher rates bidder L2 |
| 3 | L3₹25.5 CrRejected-AOC VILL AND P O JAHU NEAR SHIV MANDIR TEHSIL BHORANJ DISTT HAMIRPUR HP | JAHU | HAMIRPUR | HIMACHAL PRADESH | ₹25.5 Cr | L3 | Rejected-AOC Rejected due to higher rates bidder L3 |
| 4 | L4₹28.0 CrRejected-AOC | ₹28.0 Cr | L4 | Rejected-AOC Rejected due to higher rates bidder L4 |
| 5 | Rejected-Technical | - | - | Rejected-Technical Non Responsive as per Cl 4.5.3(b) |
Tender Value
₹30.3 Cr
EMD Value
₹60.5 L
Closing Date
20 Sept 2021, 5:00 pmClosed
Executive Engineer
Executive Engineer, HP.PWD Division Jaisinghpur
Formation cutting intermidiate standard, C/o Retaining wall, Cross drainage, P/L GSB, Metalling and tarring, Cement concrete pavement, C/o Road side PCC drain, Parapet, road side furniture etcetra) under Central Road and Infrastructure Fund ( CRIF)
2021_PWD_51989_1
Improvement and strengthening of Alampur Harsipat
Open Tender
Civil Works - Roads
605 days
Jaisinghpur
Please refer Tender documents.
11 documents required · 11 mandatory
₹15,000
₹60.5 L
27 Oct 2021
6 Sept 2021
21 Sept 2021
6 Sept 2021
20 Sept 2021
6 Sept 2021
Amount
Excavation for roadway in hilly area in all height and depths and in all kinds of soil by manual /mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORTH technical specification Section 300 and sorting out useful materials and stacking the same within all leads and lifts in acquired width of road and transportation of un-useful material for filling in road way, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all mode of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and others incidentals necessary to complete the work by mechanical means/labour if required. All usefull material such as stone shingle aggregate and states etcetra shall be sorted out and stacked in proper stack. Recovery of stone to the tune of 2209.46 cubic meter at the rate of Rs. 300.00 (Rupees three hundred only) per cubic metre shall be effected from the contractor's running bills or on pro-rata basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures or other sources graded and compacted transporting to site, spreading, grading in 200mm (Two hundred milimetre) thickness with three wheel 80-100 (eighty- hundred) KN static weight road roller to meet requirement of table 300.2 as per MORTH technical specifications section 300 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site and compacted/rolling with vibrator roller 8 - 10 (Eight to Ten) Tonne capacity grading to required slope and compacted to meet requirement of table 300.2 as per MORTH technical specifications section 400 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Loosening of the ground upto a level of 500mm (five hundred millimeters) below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 for sub-grade construction as per MORTH technical specification section 300 with power road roller 8-10 tonne (Eight-Ten tonne) capacity for sub grade as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of granular sub-base 200mm (Two hundred millimetre) compacted thickness by providing grading-I material (as per table 400.2) spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory smooth wheel roller to achieve the desired density complete as per MORTH technical specification section 400 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing, laying, spreading and compacting by mechanical means 250mm (Two hundred fifty millimeter) thick in two layers (125mm (One hundred twenty five millimeter) thick each layer) graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 8-10 (eight to ten) tonne capacity to achieve the desired density as per MORTH technical specification section 400 as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing laying spreading and compacting by mechanical means of crushed/broken stone aggregate 63mm to 45mm (Sixty three millimetre to forty five millimetre) size Grading-I of 150mm (One hundred five milimetre) compacted thickness to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with vibratory roller not less than 8 to 10 (Eight to Ten) tonne capacity in stages to proper grade and camber including applying and brooming requisite type of stone screening type-A size 13.2mm (Thirteen decimal two milimetre) nominal size at the rate of 0.12 cum (Zero decimal one two cubic metre) per ten square metre road surface area and binding materials at the rate 0.06cum (Zero decimal zero six cubic metre) per ten square metre for grading-II material to fill-up the interstices of coarse aggregate watering and compacting to the required density as per MORTH Technical specification section 400 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kgs per Sqm. (zero decimal eight five kilogram) per square metre using mechanical means as per MORTH technical specifications section 500 including hauling of material in all leads, lifts as per the entire satisfaction and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kgs (Zero decimal Two seven five kilogram) per square metre on the prepared granular surface treated with primer and surface cleaned with Hydraulic broom as per MORTH Technical Specification section 500, as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg (Zero decimal two two five kilogram) per square metre on the prepared bituminous surface treated with primer and surface cleaned with Hydraulic broom as per MORTH Technical Specification section 500 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying 60mm (sixty millimetre) thick Dense graded bituminous macadam with 100-120 TPH hot mix plant producing an average out put of 75 tonnes (Seventy five) per hour using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder VG-10 (Vilscosity Grade-ten) at the rate 4.5% (Four point five percent) of mix transported to site within all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORTH Technical Specification section 500 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying 40mm (forty milimetre) compacted thickness bituminous concrete with minimum 100-120 (One hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2mm (Thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-ten) at the rate of 5.5% (Five point Five percent) of mix weight transported to site laid with censor paver finisher hydroulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (Twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermidiate rolling and finish rolling with 6-8 (Six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specification section 500 as per the direction and entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Scarifying the existing bituminous road surface by mechanical means upto any depth and disposal of scarified material within all leads and lifts as per MORTH technical specification section 300 complete in all respect and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base, with 43 (forty three) grade cement M-30 (M-thirty) at the rate of 430 Kg (Four hundred thirty kilogram) per cubic metre, coarse and fine aggregate conforming to IS: 383: maximum size of coarse aggregate not exceeding 25mm (Twenty five millimetre), mixed in a batching and mixing plant as per approved mixed design, transported to site, laid with a fixed form or slip form paver spread compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane of impermeable plastic sheeting 125 (One hundred twenty five) micron thick sealent primer, joint sealant debonding strip, dowel bars, tie rod, admixtures as approved curing compound finishing to line and grades as per drawing and MORTH technical specification section 600 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Earth work in excavation for all type of road structure such as retaining walls,breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and MORTH technical specifications section 300 and as per direction of the Engineer-in-charge by mechanical means and labour if required including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantom of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete for all type of structure complete of plain cement concrete grade M-15 (M- fifteen) designed mix with minimum cement contents not less than 275 Kg. (Two hundred seventy five kilogram) per cubic metre with crushed stone aggregate 40mm (Forty millimetre) nominal size on ground or under water and curing complete for 14 ( fourteen) days including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in Cradle Bedding etcetra as per drawings and MORTH technical specification section 1700 and 2900 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete for all type of structure complete of plain cement concrete grade M-10 (M-ten) with crushed stone aggregate 40mm (Forty millimetre) nominal size with minimun cement contants not less then 230 kg (Two hundred thirty killogram) per cubic meter and curing complete for 14 ( fourteen ) days including the cost of form work in Retaining wall, Breast wall, Mat concrete in CD etcetra including pumping or bailing out water, dewatering, removal of slush which may arise at the time of laying concrete in all heights/depsths complete as per drawings and MORTH technical specification section 1500, 1700 and 2100 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Back filling with granular material behind abutment, wing wall and return wall complete as per drawings & MORTH technical specification Clause 710.1.4. of IRC :78 and section 2200 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing 100mm (One hundred millimetre) diametre PVC pipe weep holes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall extending through the full width of the structures with slope of 1(V):20(H) [one vertical and twenty horizontal) towards draining face complete as per drawing and MORTH technical specification section 2700 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and viberated reinforced cement concrete M-20 (M-Twenty) in substructure designed mix with minimum cement contents not less than 344 Kg (Three hundred forty four kilograms) per cubic metre with 40mm (forty millimeters) nominal size crushed stone aggregate in Abutment, Toe Wall etcetra as per drawings and MORTH technical specification section 1500, 1700 and 2200 including form work and curing complete and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and errecting a "W" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail, 70cm (Seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2 m (Two metre) centre to centre, 1.8 m (One decimal eight mrtre) high, 1.1 m (One decimal one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm (One hundred fifty into seventy five into five millimetre), 330 mm (Three hundred thirty millimetre) long complete as per MORTH technical Specification section 800. as direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete grade M-20 (M-Twenty) nominal mix 1:2:4 (One cement isto two sand isto four graded crushed stone aggretgate 20mm (Twenty milimetre) nominal size in open foundation like drain etcetra as per drawings and MORTH technical specifications section 1500,1700 and 2100 including the cost of form work and curing complete as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying ( to level or slope) 1000mm dia (One thousand millimeter) diametre prestressed / reinforced cement concrete heavy duty non pressure pipes IS Class NP-4 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and MORTH technical specifications section 2900 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanical mixed and viberated reinforced cement concrete M-25 (M-Twenty five) in substructure designed mix with minimum cement contents not less than 403 Kg (Four hundred three kilograms) per cubic metre with 20mm (Twenty millimeters) nominal size crushed stone aggregate in bed block and dirt wall as per drawings and MORTH technical specification section 1500, 1700 and 2200 including form work and curing complete and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Furnishing and placing reinforced/pre-stressed mechanically mixed and vibrated cement concrete in super-structure as per drawing and technical specification RCC Grade design mix to obtain minimum compressive strength of M-25 (M-Twenty five) using minimum cement contents not less than 399 Kgs (Three hundred ninety nine kilograms) per cubic metre with crushed stone aggregate 20mm (Twenty millimetre) nominal size in deck slab including form work and staging in all heights and curing complete as per drawings and MORTH technical specification section 1500, 1700 and 2300 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 ( M-Thirty) design mix with minimum cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm (Twenty millimeters) nominal size crushed stone aggregate and curing complete in wearing coat including cost of form work and reinforcement complete as per drawing and MORTH technical specification section 1500, 1600, 1700 and 2700 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of precast RCC railing of M-30 (M - Thirty) Grade design mix concrete including the cost of form work and reinforcement and constructing true to line and grade, tolerance of vertical railing post not to exceed 1 in 500,( One in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand milimetre), leaving adequate space between vertical post for expansion, complete as per approved drawings and MORTH technical specifications Section 1500, 1600, 1700 and clause 2703. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing drainage spouts complete as per the Drawings and Morth Technical Specifications. Item to include all materials, labour, machinery/equipment and incidental work required to complete the job within all leads and lifts as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and placing M-15 grade reinforced cement concrete with Ordinary Portland Cement, using 20mm (twenty millimetre) stone aggregate and approved quality sand mechanically mixed vibrated and curing complete by using batching plant ,transit mixer and concrete pump in cast-in-situ approach slab below the approaches, complete with making all joints and their sealing, as per the Drawings and Morth Technical Specifications excluding the cost of reinforcement only. Item to include all incidentals, labour, materials, equipment and works required to execute the job within all leads and lifts as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and Laying boulder filling with stone boulder weighing not less than 25 kg each complete as per drawing and technical specification 2503. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and placing M30 grade reinforced cement concrete with Ordinary Portland Cement, using 20mm (twenty millimetre) down stone aggregate and approved quality sand mechanically mixed vibrated and curing complete by using batching plant ,transit mixer and concrete pump in cast-in-situ approach slab over the approache slab, complete with making all joints and their sealing, as per the Drawings and Morth Technical Specifications excluding the cost of reinforcement only. Item to include all incidentals, labour, materials, equipment 1500,1600,1700 and 2704and works required to execute the job within all leads and lifts as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-Fifteen) with graded crushed/broken stone aggregate 40mm (Forty millimeters) nominal size 5th (Fifth) kilometer stone (Precast) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) with graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size in kilometre stone of standard design as per IRC :8-1980 Fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 [Ordinary kilometre stones precast] and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Reinforced cement concrete mechanically mixed and vibrated Grade M-15 (M-fifteen) with graded curshed/broken stone aggregate 40mm (forty millimetre) nominal size in local stone of standard design as per IRC :8-1980 Fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 precast hecto-meter stone and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting ,place identification retro reflectorized sign more than 0.90 (zero point nine zero ) square meter as per IRC: 67 made of high intensity grade sheeting vide clause 801.3 of MORT&H Specification (latest revision) fixed over aluminum sheeting, 2mm (Two millimetre) thick as per Clause 801 of MORT&H Specification (latest edition). The back of aluminum sheet to be painted with epoxy paint of standard make, this plate to be fixed on a frame made of mild steel angle 25x25x3mm (twenty five in to twenty five in to three millimeters) with two vertical supports with nuts bolt aluminum rivets. The structure to be fixed on two posts of 3.5 mtrs (three point five meter) Long 75x75x6mm (seventy five into seventy five into six millimeters) size angle having 125x125x6mm (one hundred twenty five into one hundred twenty five into six millimeters)Mild steel base plate at the bottom. The posts be painted in the black and white alternative bands of 25cm (twenty five centimeter) height. These vertical posts be firmly embedded in a length of 300mm (three hundred millimeters) in concrete blocks of grade M-15 (M-fifteen) standard mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) wherein the cement concrete block will be 600mm (six hundred millimeters) below the ground level including hauling of material in all leads and lifts by all modes of transportation. as per MORTH specification section 800 and as per entire satisfaction and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting ,place identification retro reflectorized sign upto 0.90 (zero point nine zero ) square meter as per IRC: 67 made of high intensity grade sheeting vide clause 801.3 of MORT&H Specification (latest revision) fixed over aluminum sheeting, 2mm thick as per Clause 801 of MORT&H Specification (latest edition). The back of aluminum sheet to be painted with epoxy paint of standard make, this plate to be fixed on a frame made of mild steel angle 25x25x3mm (twenty five in to twenty five in to three millimeters) with two vertical supports with nuts bolt aluminum rivets. The structure to be fixed on two posts of 3.5 mtrs (three point five meter) Long 75x75x6mm (seventy five into seventy five into six millimeters) size angle having 125x125x6mm (one hundred twenty five into one hundred twenty five into six millimeters)Mild steel base plate at the bottom. The posts be painted in the black and white alternative bands of 25cm (twenty five centimeter ) height. These vertical posts be firmly embedded in a length of 300mm (three hundred millimeters) in concrete blocks of grade M-15 (M-fifteen) standard mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) wherein the cement concrete block will be 600mm (six hundred millimeters) below the ground level including hauling of material in all leads and lifts by all modes of transportation. as per MORTH specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting cautionary/mandatory retro-reflectrorised traffic signs as per IRC-67(Sixty seven) made of high intensity grade sheeting vide clause 801.3 fixed over aluminum sheeting, 1.5mm (one point five millimeter) thick, sixty centimetre equilateral triangular or sixty centimetre dia circular sign board, supported on a mild steel single angle iron post 75x75x6mm (Seventy five into seventy five into six millimeter) firmly fixed to the ground by means of properly designed foundation with M-15(Fifteen) grade cement concrete 45x45x60cm (forty five into forty five into sixty centimeter), 60cm (sixty centimeter) below ground level as per approved drawing and design complete as per MORTH Technical specification section 800 and as per entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying of hot applied thermoplastic compound paint 2.5mm (two point five millimeter) thick including reflectrising glass beads @ 250 gms (two hundred fifty grams) per square meter area , thickness of 2.5mm (two point five millimeters) is exclusive of surface applied glass beads by road marking machine as per IRC 35. The finished surface to be level, uniform and free from streaks and holes as per MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying boulder apron laid in wire crates with 4 mm dia (Four millimetre diametre) GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (One hundred millimeters into One hundred millimeters ) mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg ( forty kilogram) each in toe walls as per drawing and MORTH technical specifications section 2500 and as per direction of the Engineer- In –Charge including carriage of materials within all leads and lifts and other incidental.The rate including of octroi, royality, Malkana, toll tax, Sale tax, GST or other taxes imposed by the Government.
M/s Satish Kumar Sharma
S.S.Chauhans Construction Private Limted
M.S JAGDISH CHAND GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid