Snehaveedu Electrical works and Street Lights Installation, Division 8, Vilvattam Zonel, Thrissur Corporation

Amount

Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Light point (Medium point)

Exhaust fan point (Medium point)

Ceiling Fan with stepped type electronic fan regulator (Medium point)

Combined plug point

Supply and drawing for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel or PVC conduit as required 3 X 1.5 sq. mm

3 x 2.5sq.mm

3 X 4 sq. mm

Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case reccessed counduit as required. 20 mm PVC conduit

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following size/ modules PVC surface box on surface or in recess,for modular socket outlet and modular switch as required. 2 Module Plastic box ( 75mm X 75mm)

3 Module Plastic box (100 mm X 75mm)

6 Module Plastic box (200 mm X 75mm)

8 Module Plastic box (250 mm X 75mm)

Supplying and fixing following size/ modules modular base and cover plate on existing modular PVC surface boxes etc required. 1 / 2 Module plate

3 Module plate

6 Module plate

8 Module plate

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch.

5/6 A socket outlet

15/16 A switch

15/16 A socket outlet 2 Module type

Supply and installation of single phase double cover dust and vermin proof enclosure of MCB DB including copper/brass bus bar neutral link and DIN bar suitable for fixing MCB ,isolator etc. including providing blanking plates in the blanking slots ,fixed on wall making good the damages,colour washing etc.as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE). Single phase 8 way DB duble door

Supplying and fixing of following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required. (but without MCB/ RCCB/Isolator). ( Make Legrand/ Siemens/ L&T/Hager/ GE). 6way (8+18) Double door

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE). 40 A Double pole Isolator

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE). 63A Four pole Isolator

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE). Single Pole MCB

Double Pole MCB

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.( Make Legrand/ Siemens/ L&T/Hager/ GE). 40 A double pole 30mA, RCCB

Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE). 63 A four pole 30mA, RCCB

Supply, conveyance installation testing and commissioning the light fittings of following box types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp for box type fixture (including LED Tube). ( Model Crompton, Bajaj, Philips )

Supply and fixing brass batten/ angle holder with 200 mm Plastic sill shade and giving connection including supply of 9/10W LED lamp. etc complete

Supply and fitting cast alluminium stove enamelled elliptical shape bulk head fitting with porcelane holder and GI meshguard with front clear glass and 9/10W LED lamp ( Model Crompton, Bajaj, Philips) to wall including giving connections using 16/0.20 mm PVC insulated and sheathed 3 core round copper conductor etc complete.

Supplying, installing, testing and commissioning LED Street light 70/72 W, 240V, 50Hz ( Model Bajaj, Philips ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.

Supplying, installing, testing and commissioning LED Street light 45 W, 240V, 50Hz ( Model Bajaj, Philips ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.

Supplying, installing, testing and commissioning LED Flood light 50W, 240V, 50Hz, ( Model Bajaj, Philips, ) output > 120 lumen/W 5700 K with IP 66 protection, internal surge protection 4 KV, LED Chip make Cree/Lumilled/Nichea with power factor>0.95 at full load, flood light luminaire with high power light source with secondary optics: reflector made up of high purity matt finish anodized aluminium sheet and built-in isolated electronics LED driver ensures zero maintenance as per IS 15885 Part-2/Sec 13. Including provide suitable clamps for fixing the light etc. complete as required.

Supply, conveyance, installation, testing and commissioning of Ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan ( Model Crompton, Bajaj, Usha, Havells, Orient) complete with 300mm down rod, canopies, shackeles and blades etc complete.

Supply, conveyance, installation, testing and commissioning of 400 mm sweap AC wall fan (Model Crompton, Bajaj, Usha, Havells, Orient) using standard accessaries and including regulator with 16/.02mm PVC insulated and pvc sheathed 650/1100V grade 3 core round copper conductor flex wire and fixing on the wall with proper screws and giving connections. etc. complete.

Supply, conveyance, installation, testing and commissioning of 300 mm sweap exhaust fan in metal frame (Model Crompton, Bajaj, Usha, Havells) in the existing opening, fixing necessary bolts nuts making good the damages etc. as required including giving connection with required length of 16/.02 mm PVC insulated and PVC sheathed 3 core round copper conductor flexible wire.

Supply, conveyance, installation, testing and commissioning of 200/230 mm sweap Exhaust fan (Model Crompton, Bajaj, Usha, Havells) in the existing opening, fixing necessary bolts nuts making good the damages etc. as required including giving connection with required length of 16/.02 mm PVC insulated and PVC sheathed 3 core round copper conductor flexible wire etc complete.

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

Supply and laying through HDPE pipe of the following size PVC/ XLPE insulated armoured cable with aluminium conductor for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE. 16 sq.mm 4 core Aluminium conductor

Supplying and making end termination with brass compression gland and Aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required. 4x 16 Sq.mm

Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing DWC HDPE pipe as required. 3 core 4 sq mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes 50/38 mm or nearest size made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground including excavation of trench

Supply & laying of one number PVC insulated and PVC sheathed armoured Aluminium power cable of 1.1KV grade of the following sizes and including making end termination with brass compression gland and aluminium lugs, in the existing DWC HDPE pipe as required. 2 core 6 sq mm.Aluminium cable

Supplying, drawing and connecting of one number the following size FR LS, PVC Insulated and PVC sheathed round cable with copper conductor of 1.1 KV grade for interconnecting etc complete. 3 core1.5 sq.mm (48/0.20 mm)

Supplying and fixing of junction box weather proof type (make HENSEL DM 9040 / Sintex IP 67) of following size with weather proofing sealant, etc complete. Size 140x140x 95mm

Supply and fitting in the existing light pole bottem box 5A TP connector for the power tool control and giving connections etc complete.

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Metering LT Panal Board : Supply, fabrication, erection, testing and commissioning the following Wall mounted free standing cubicle type fully compatmentalised (Busbar chamber, Cable chamber, 3phase Energy meter chamber, SFU cabin 1No. and 3 Nos outgoing cabin.) dust tight, vermin proof LT panel boards fabricted out of 16SWG CRCA sheet and powder coated as per IS standards . The Board shall be completed with phase indication lamps in the incoming, suitably rated TPN Aluminium Busbars and earth bus of adequate capacity, double earth connection to all switches, intenal rigid connection etc. (Incomer:- 125A TPN SFU with Rotry handle -1No ,TPN Al. Busbar as per ISS, Outgoing :- 100 A TPN Isolator- 3 Nos

Providing independent ordinary pipe earthing using 1.50 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt ,charcoal bolts and nuts etc. complete required at site.

Supply and drawing following size copper conductor for bare copper conductor along with cable and earthing including copper socket etc. as required. 3.15 mm (10 SWG)

J R Associates Electrical Engineers and Contractors

T AND C ELECTRICS