Janpad Bareilly main adhishashi abhiyanta, karayale parisar evam nirikshan bhawan 77-cannt, bareilly ke marammat ka karye.

Dismantling Brickwork or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m as per direction of Engineer in Charge

Dismantling Brickwork or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m as per direction of Engineer in Charge

Dismantling existing plaster including disposal of refuse with in distance of 60 meters.

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled material with in 60 M distance.

Laying Brick work C.M. 1:4 Mix cement & coarse sand including cost of all material, labour and T&P etc. complete.

Centering and shuttering of R.C.C. work including rent of shuttering material, labour and T&P required for proper completion of work for slab, lintels, sun shades, columns & walls etc.

Reinforcement including cutting, bending & binding in position including all cost of labour, material and T&P etc. complete. at site per M.T.

Laying R.C.C. 1:1.5:3 Mix (M-20) cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Sal wood

Cement Plaster in 1:4 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing of wall with water profing cement paint of approved make such as super snocem durocem robicem, supreme quality of required shade on uncoated wall surface (one coat) over one coat white cement primer to give even shads after throughly brushing the surface to remove all dirt and dust and remaining of loose powder ed material including curing & cost of all materials.

Distempering Ist coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes(weight not less than 10 kg per sqm) fixing with isi marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm thick

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading.

painting with synthetic enamel paint of approved brand and manufacture of required color to give even shade . Two or more coats on new work over an under coat suitable shade with ordinary paint of approved brand and manufactured.

Laying C.C. 1:1.5:3 Mix (M-20) cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.

Providing and laying vitrified floor tiles in 60x60 cm size (thickness to be specified by the manufacturer) with water absorption's less then 0.080% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement morter 1:4 including grouting the joints with white cement and matching pigments etc. including all cost of material, labour & T&P etc. complete.

Providing and applying water proofing treatment to RCC roof slab Etc. By application of two coats of cement slurry mixed with water proofing compound (acrylic waste polymer, solid content 30%+-3,pH>7)in the ratio of 1:2 (1 part of water proofing compound : 2 part of cement by weight ), followed by 2 coat of single compound moisture cured polyurethane based elastomeric water proofing coating confirming to ASTM C-836-89 having tensile strength 3.1n/mm^2 Topping layer of 25mm thick cement concre1:2:4 ( to be paid separately ) to be laid .

Providing and laying facttory made 80mm thick interlocking cement concrete tiles 30mpa i/c 25 mm thick compacted bed of fine sand compacting and proper embedding laying of interlocking tile leveling and dressing of surface to required level and slope filling joints with fine sand i/c the cost of material labour t&p etc

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-inCharge.With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles.

Clearing grass and removal of the rubbish up to a distance of 50 mtr out side the periphery of the area cleared.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre includ ing drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos E.C. 20% with 1% concentratio

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Supplying , assembling, lowring and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to is:12818 including hire and labour charge, fittings and accesosries etc. all comlete, for all depth , as per direction of engineer in charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Earth work in foundation in dry ordinary soil including lift up to 1.50 m and lead up to 30 m and including back filling, watering and ramming fo excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in-charge.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit submain wiring alongwith earth wire with the following size of FRLS PVC insullated copper conductor, single core cable in surface recessed medium class PVC conduct as required . 2x2.5 sqmm + 1x2.5 sqmm earth wire

Same as in item 35 but with 2x6.0 sqmm + 1x6.0 sqmm earth wire

Supplying and fixing 5A to 32 A rating , 240/415 V , 10ka , "C" curve , miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc. as required. Single pole

supplying and fixing following size/modules,G.I. box along with modular base and cover plate for modular switches in recess etc as required 1 or 2 module (75mmx75mm)

supplying and fixing following size/modules,G.I. box along with modular base and cover plate for modular switches in recess etc as required 3 module (100mmx75mm)

supplying and fixing following size/modules,G.I. box along with modular base and cover plate for modular switches in recess etc as required 4 module (125mmx75mm)

supplying and fixing following size/modules,G.I. box along with modular base and cover plate for modular switches in recess etc as required 8 module (125mmx125mm)

supplying and fixing following size/modules,G.I. box along with modular base and cover plate for modular switches in recess etc as required 12 module (200mmx150mm)

Making of Earthing with COPPER EARTH PLATE of size 600mmx600mmx3mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.

Supplying and fixing of following ways surface/recess mounting verticle , 415 V , TPN MCB db of sheet steel , dust protaced duly powder painted , inclusive of 200 A tinned coper bus bar , comon neutral , earthwork , din bar for mounting MCBs ( but without MCBs and incomer ) as required. (Note Verticle type MCB TPDBis normally used where three phase outlet are required.). 8 Way (4+24),double door

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 leter low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend . overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete. including painting of fittings and brackets, cutting and making good the walls and floors wherever required; W.C. pan with ISI marked white solid plastic seat and lid.

Providing & fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast iron P or S trap, 10 ltr low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required; white vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

providing and fixing wash basin with C.I. brackets, 15mm C.P. brass piller taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets , cutting and making good the walls wherever require: White Vitreous China wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar tap.

Providing and fixing white vitreous china flate back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standerd flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete. including painting of fittings and brackets , cutting and making good the walls and floors wherever required; one urinal basin 5 liter white P.V.C. automatic flushing cistern.

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.8) Concealed work including cutting chases and making good the walls etc. 20mm nominal bore

25mm nominal bore

32mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690gms.(DSR Item No 18.51) 15mm dia, nominal bore .

Providing and placing on terrace (at all floor levels) polyethylene triple layer water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and base support for tank(DSR Item No 18.48)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore

Please Enable Macros to View BoQ information