ESTABLISHMENT OF ARTIFICIAL INTELLIGENCE (AI) TRAINING AND INNOVATION LAB AT HINDU COLLEGE (CLASSROOM INFRASTRUCTURE) AS per QCBS Methodology

Amount

Comprehensive Site Preparation & Demolition Works • Dismantling and safe removal of existing AC units (4 Nos) with proper handing over to concerned authorities. • Removal of existing electrical installations (1 Lot). • Dismantling of existing doors (4 Nos). • Removal of existing glass door near balcony, supply and installation of horizontal section of matching make, and provision of a new glass door as per revised design and specifications (1 Set). • Demolition of existing walls (395 Sqft). • Cleaning of the entire site area (1250 Sqft). • Collection, clearing, and disposal of demolition debris (8 Trips) as per local regulations. • Complete pest control treatment against white ants and borers for the entire area (1250 Sqft). Note: • All debris to be cleared from site and disposed of at authorized locations. • Pest control treatment to be done using standard, approved chemicals with a 1-year effectiveness guarantee. • All works to comply with safety and environmental guidelines.

Comprehensive Flooring and Wall Finishing Works Sub-Base Preparation: • Supply and laying of Plain Cement Concrete (PCC) up to 75mm thickness using a mix of cement, sand, and stone aggregates along with water on top of MS slab (1250 Sqft). IPS Floor Smoothing Layer: • Providing and finishing IPS flooring with a smooth, self-leveling layer of up to 10mm thickness over PCC to receive carpet finish (1180 Sqft). Wall Cladding with Stone Finish: • Supply and installation of 50x25mm aluminum section framework with Bison Board on top, insulated with 50mm dense rock wool, finished with 12mm weatherproof Bison Board. • Final finish with 800x2400x15mm stone slabs as per design, including edge molding and polishing (195 Sqft). • Basic stone rate considered at Rs. 180/Sqft. • Approved Make: Motto or Equivalent. Flooring with Stone Finish: • Supply and fixing of 800x2400x15mm stone for flooring as per approved design and specification, including edge molding and polishing (70 Sqft). • Basic stone rate considered at Rs. 180/Sqft. • Approved Make: Motto or Equivalent. Notes: • All surface preparation, adhesives, fixing materials, and consumables are included. • Finishes to be completed as per design intent, ensuring seamless joints and proper alignment. • All work to comply with relevant IS codes and safety standards.

MS Base Frame Fabrication with Kota Stone Finish Supply, fabrication, and installation of MS base frame using 50x25mm MS box pipes, supported by MS base plates and fasteners, including 50x50mm MS T & L sections forming a square grid to achieve required levels as per design. Top finish with Kota stone, including edge molding and polishing. Complete with anti-corrosion primer, two coats of enamel paint, and all necessary materials, tools, and labor. Notes: • Kota stone of approved quality. • All works as per design and structural standards.

Ceiling and Gypsum Finishing Works This item includes complete supply, installation, and finishing of various ceiling systems as per approved design and specifications: Plain Gypsum Ceiling: • Supply and installation of plain gypsum board ceiling (363 Sqft). • Framework with channels of Gypsum India or equivalent. • Gypsum boards of Gyproc or equivalent. Perforated Acoustic Gypsum Board Ceiling: • Supply and installation of perforated acoustic gypsum board ceiling to enhance acoustic performance (855 Sqft). • Approved Make: Gyproc or Equivalent. Modular Grid Ceiling: • Supply and installation of modular grid ceiling with 0.55 NRC Armstrong tiles and groove-patterned metal framework (32 Sqft). Service Cutouts: • Light fixture cutouts (40 Nos). • Speaker cutouts (10 Nos). Decorative Moulding: • Supply and fixing of decorative gypsum moulding up to 75mm (350 Rft). Notes: • Includes all necessary frameworks, suspension systems, fasteners, finishing materials, and consumables. • All cutouts to be precisely aligned with electrical and speaker layouts. • Final surface finish to be smooth, seamless, and ready for paint or final decorative application. • All works to comply with relevant IS codes and acoustic performance standards.

Painting and Surface Finishing Works: Includes supply and application of plastic emulsion paint on ceilings (1250 Sqft) and luster paint on walls (250 Sqft) using Asian Paints or equivalent. Scope covers all surface preparation, putty, primer, and two coats of finishing paint to achieve the desired aesthetic and quality. Final site cleaning after completion of works is also included, ensuring a clean and ready-to-use environment. All materials, tools, and safety measures are part of the scope, with compliance to relevant IS standards.

Workstation Desk Supply and Installation Includes supply and fixing of modular workstation desks sized 1050mm x 600mm x 750mm, fabricated using Green Ecotech or equivalent plywood with 25mm thick top, modesty panel, and legs, all finished with Merino or equivalent laminate (Basic laminate rate Rs. 1800 per sheet). Desks to include necessary wire entry points, provision for mounting switchboards with flip-up box or cable manager, and all hardware and accessories as per approved design and specifications. Complete in all respects for functional and aesthetic readiness.

Working Desk Supply and Installation: Includes supply and fixing of working desks sized 1800mm x 900mm, fabricated using Green Ecotech or equivalent plywood with 25mm thick top, modesty panel, and legs, all finished with Merino or equivalent laminate (Basic laminate rate Rs. 1800 per sheet). Desks to feature necessary wire entry points, provision for mounting switchboards with flip-up box or cable manager, and all required hardware and accessories as per approved design and specifications. Complete in all respects, ensuring functionality, durability, and aesthetic appeal.

Acoustic Door Supply and Installation Includes supply and fixing of aluminum pipe-framed doors covered with 12mm Green Ecotech or equivalent plywood, finished with Merino or equivalent laminate (Basic laminate rate Rs. 1800 per sheet), and edged with BTC beading. The door is to be internally filled with 50 kg/m³ density rockwool for sound insulation, equipped with rubber gaskets, drop sills, and complete with all necessary hardware from Ozone, Geze, or equivalent. Delivered and installed in fully functional, ready-to-use condition as per approved design and specifications.

Wooden Door Frame Supply and Installation Includes supply and fixing of wooden door frames of size 100x75mm, fabricated using Green Ecotech or equivalent plywood, finished with high-quality melamine polish as per approved design and specifications. Frames to be treated for acoustic performance to minimize sound transmission. Complete in all respects, ensuring durability, aesthetic finish, and functional readiness.

Acoustic Wall Paneling Supply and Installation Includes supply and fixing of laminate wall paneling using a 50x25mm aluminum frame filled with 50kg/m³ density rock wool for acoustic insulation. The frame will be covered with 12mm Green Ecotech or equivalent plywood and finished with Merino or equivalent laminate (Basic laminate rate Rs. 1800 per sheet). All joints to be seamlessly finished as per approved design and specifications. Complete in all respects, ensuring aesthetic appeal, durability, and enhanced acoustic performance.

Acoustical Wall Paneling Supply and Installation Includes supply and installation of acoustical wall paneling with 50x25mm aluminum frame covered with 12mm plywood and dense acoustic sheet from Techno, Bollard, or equivalent. Paneling to be finished with 75mm black powder-coated aluminum skirting. Complete installation as per approved design and specifications.

Aluminum Framed Partition with Laminate Finish Includes supply and fixing of aluminum-framed partitions using 25x50mm sections spaced at 600mm c/c, filled with 50kg/m³ rockwool for acoustic insulation. Covered with 12mm Green Ecotech or equivalent plywood and finished with Merino or equivalent laminate on both sides. Complete with all necessary hardware and accessories as per design.

Dotline Glass Partition System Supply and Installation Includes supply and installation of Dotline Partition System using Vedic or equivalent make with 45x25mm sections on all four sides. Includes 12mm/10mm toughened glass (Saint Gobain make) with 'I' profiles for glass-to-glass butt joints and necessary aluminum junctions. Complete with all hardware, sealants, gaskets, and accessories. Approved hardware makes: Dorma, Vedic, or Equivalent.

Aluminum Frame Wooden Box for LED Screen Supply and Installation Includes supply and fixing of aluminum frame wooden box ready to receive LED screen, fabricated with Green Ecotech or equivalent plywood, finished with Merino or equivalent laminate. Provided with 100mm powder-coated aluminum skirting as per approved design and specifications. Complete in all respects, ready for installation of LED screen.

Laminate Finished ‘C’ Type Pelmet for Roller Blinds Includes supply and fixing of laminate-finished ‘C’ type pelmet for roller blinds near windows, fabricated using Green Ecotech or equivalent plywood and finished with Merino or equivalent laminate. Complete installation as per design and specifications.

Aluminum Powder-Coated Skirting Supply and Installation Includes supply and fixing of 100mm high aluminum powder-coated skirting, finished in matte black as per approved design and specifications. Complete in all respects with necessary accessories for seamless installation.

Aluminum L-Shape Edge Profile Supply and Installation Includes supply and fixing of 100mm x 25mm L-shaped aluminum edge profile with matte black finish, featuring anti-skid top surface. Installation to be carried out as per approved design and specifications, ensuring safety and aesthetic alignment.

Aluminum Section Rafters with Laminate Finish Supply and Installation Includes supply and fixing of 100mm x 25mm aluminum section rafters, covered with plywood and finished with laminate. Rafters to be installed free-standing vertically and on the ceiling, forming L and C shapes as per approved design and specifications. Complete with all necessary supports and accessories.

Standing Console Supply and Installation Includes supply and fixing of standing console fabricated from Green Ecotech or equivalent plywood and finished with Merino or equivalent laminate. Installation to be completed as per approved design, ensuring functionality and aesthetic appeal.

Aluminum Framed Paneling for Passage Wall Supply and Installation Includes supply and fixing of aluminum-framed paneling using 25x50mm sections with members at 600mm c/c, covered with 12mm Bison Board to pack passage walls. Installation to be completed as per design and specifications, ensuring a clean and durable finish.

Lacquered glass Supply and Installation Includes supply and fixing of Back painted Glass of customized shape and size with thickness of 5mm. Make ; Saint Gobain or equivalent. Installation to be completed as per approved design, inclusive of all adhesives and basework required

Cushioned Seat and Net Back Chair Supply and Installation Includes supply and installation of cushioned seat and net back chairs with gas lift and one-position lock mechanism, as per approved design and specifications. Approved make: Merryfaire or equivalent.

Blackout Roller Blinds Supply and Installation Includes providing and fixing of blackout roller blinds with manual pull system, ensuring complete light blocking as per design and specifications. Approved make: Décor or equivalent.

Artificial Green Wall Supply and Installation Includes supply and fixing of artificial green wall panels as per approved design and specifications, enhancing interior aesthetics. Approved make: Super Grass or equivalent.

Hindu College Logo Supply and Installation Includes supply and fixing of Hindu College logo fabricated as per approved design and specifications. Complete in all respects with required mounting accessories.

Plaque Card of SS 304 Plate Supply and Installation Includes supply and fixing of plaque card made from SS 304 plate, fabricated and engraved as per approved design and specifications. Complete with mounting hardware.

SITC of Aluminum/Copper Armoured XLPE FRLS Grade PVC Insulated Cables as per IS 1554. Cables to be fixed on walls, ceilings, or trays with GI clamps and cable ties at every 450mm interval or laid in pre-formed trenches. Scope includes cable tagging at both ends, arrow marking at panel end for current flow direction, and complete terminations.

4 Core 10 sq.mm Copper Armoured YWY XLPE Cable

3 Core 16 sq.mm Copper Armoured YWY XLPE Cable

3 Core 4.0 sq.mm Copper Armoured YWY XLPE Cable

SITC of Cables with Heavy Duty Aluminium/Copper Lugs and Brass Double Compression Cable Glands for 16 sq.mm and above. Glands to be properly earthed using brass clips. Bimetallic washers to be used for aluminium cable terminations with copper busbars. Approved Make: Jainson or Equivalent.

4 Core 10 sq.mm Copper Armoured YWY XLPE Cable with Heavy Duty Lugs and Glands.

3 Core 16 sq.mm Copper Armoured YWY XLPE Cable with Heavy Duty Lugs and Glands.

3 Core 4.0 sq.mm Copper Armoured YWY XLPE Cable with Heavy Duty Lugs and Glands.

SITC of 1.6 mm thick GI Perforated Cable Trays fixed on ceiling/walls using GI clamps, threaded rods, and 35mm x 2mm GI slotted 'C' channel patti or MS angle support. Supports provided at max. 800mm intervals or as required by site conditions. MS supports painted with 2 coats of red oxide and 2 coats of enamel paint. Rates include Gripple supports/GI rods and MS angle support. Approved Make: Asian, Profab, or Equivalent.

Cable Tray 100mm wide x 50mm height for IBMS, DATA, and Electrical works in passage.

Cable Tray 150mm wide x 50mm height for IBMS, DATA, and Electrical works in passage.

SITC of Powder Coated GI Trunking 100mm x 75mm, 2mm thick, with cover for routing wires near DBs and drops. Trunking fixed with GI clamps, threaded rods, and MS supports as specified. Knockouts provided on both sides at 600mm intervals. Supports to be painted with 2 coats of red oxide and enamel. Approved Make: Bek, AKG, or Equivalent.

SITC of Light Point Wiring using 20/25mm FRLS PVC Conduit with 2 Nos. of 1.5 sqmm + 1 No. of 1.5 sqmm (Earth) Copper FRLS wires, modular switches, and accessories. Switch boxes to be flush mounted, with proper termination, ferrules, lugs, and color coding. Conduits fixed on wall/trays or ceiling with spacers and saddles. Final connections terminated using connectors before fixtures. Proper stickering for DB and circuit identification. Wall chasing and backfilling under contractor scope. Approved Make: Polycab, RR for Wires; Precision, AKG for Conduits.

Primary Light Points with 3 x 1.5 sq.mm Cu FRLS Wires from Switch to First Light Point, including 5A Modular Switch.

Secondary Light Points with 3 x 1.5 sq.mm Cu FRLS Wires Looping after Primary Light Points.

Primary Emergency Light Points with 3 x 1.5 sq.mm Cu FRLS Wires from Switch to First Light Point, including 5A Modular Switch.

Secondary Emergency Light Points with 3 x 1.5 sq.mm Cu FRLS Wires Looping after Primary Emergency Light Points.

Circuit Wiring for Normal and Emergency Circuits using 3R x 1.5 sq.mm Cu FRLS Wires in FRLS PVC Conduit, complete with accessories for switch control points.

SITC of Power Sockets Mounted with Specified Switchgear in Enclosures. Termination of incoming wires using proper lugs and brass/PVC glands included. Approved Make: Roma, Anchor, Legrand, or Equivalent.

Supply and Fixing of RG 6 TV Socket with Approx. 35 Mtrs Cable in PVC Conduit.

SITC of Modular Type Shuttered Power Sockets, Data and Telephone Outlets with Chrome-Plated Mounting Box. Includes proper wiring, labeling of DB and circuit numbers, numbered ferrules, and correct color coding. Approved Make: Roma, Anchor, Legrand, or Equivalent.

2 Nos. Universal Sockets 6A Controlled by 6A Switch for UPS Power, Workstations/BMS. Double Cover Type Faceplate with Back Box.

1 No. 5A Switch and 5A Universal Socket Combined for Workstation Raw Power. Double Cover Type Faceplate with Back Box.

1 No. 6A Socket Controlled by 6A Switch with Indicator, GI Mounting Box for VAV, FCU, AV Points, and Low Voltage Equipment.

1 No. 16A 3-Pin Socket Controlled by 16A Switch with Indicator, GI Mounting Box and Double Cover Faceplate for Convenience Sockets.

25A 3-Pin IEC Tempra Sockets with Male and Female Connectors and Box for Rack/Screen Connections.

Back Boxes Required for Data/Voice Outlet Installations on Walls or Partitions, Complete with Accessories.

SITC of Circuit Mains Wiring for Workstations and Cabins, Power Sockets Direct from DB and Looped to Nearest Socket. Proper Ferrules and Termination as per Standards. Approved Make: Polycab, RR, or Equivalent.

Circuit Wiring - 3C x 2.5 sq.mm Cu FRLS Wires for UPS Points (4 Points per Circuit).

Circuit Wiring - 3C x 2.5 sq.mm Cu FRLS Wires for Raw Power Points (8 Sockets per Circuit).

Circuit Wiring - 3R x 2.5 sq.mm Cu FRLS Wires in 25mm FRLS PVC Conduit for Raw and UPS Points.

Temporary Lighting and Power Setup for 1500 Sqft Area Ensuring Minimum 200 Lux, Including MCB DBs, Small DBs, Energy Meters, Fixtures, Power Sockets, and Complete Removal after Project Completion.

SITC of 1Cx 6 sq.mm Copper Flexible Cable for Earthing with 20mm PVC HMS Conduit.

SITC of 1C x 2.5 sq.mm Copper Flexible Cable for Earthing with Brass Clips for Proper Termination.

Supply, Installation, Testing, and Commissioning of Standard Designed Earth Pits.

Supply, Installation, and Commissioning of Copper Earth Bus Bar 25mm x 3mm x 600mm on Insulators in Powder-Coated MS Box with Transparent Acrylic Cover. Bus with 10 Nos Brass Nut Bolts for Termination.

SITC of Earthing Bare Conductor Wires with Clamps, Saddles, and Brass Clips.

8 SWG GI Wire for AC Earthing and Outdoor Applications.

Supply and Laying of Raceways/Conduits Fixed to Flooring with GI Clamps or Through Partitions. All JBs and Raceways to be Earthed with 16 SWG Cu Wire. Openings to be Properly Closed with Plastic Bags During Construction.

100mm x 38mm Aluminium Raceways, 1.6mm Thick.

25mm PVC Conduits, 2mm Wall Thickness.

Junction Boxes Supply and Installation.

250mm x 250mm x 55mm Deep GI Finish Junction Boxes with Knockouts and Stainless Steel Plate. Proper Earthing with 18 SWG Cu Wire and Protection During Construction.

150mm x 150mm x 55mm Deep GI Finish Junction Boxes with Knockouts and Stainless Steel Plate. Proper Earthing with 18 SWG Cu Wire and Protection During Construction.

MS Powder Coated Sheet Steel Raceways for Network, Hub, and Server Rooms. Removable Top Cover, Knockouts at 300mm, Fixed with 40x40mm GI Angle Brackets. Supports at 500mm Intervals for IP44 Sockets.

100mm Wide x 50mm Height, 1.6mm Thick Raceways with Cover.

300mm x 75mm GI Perforated Trays for Data Cabling with Cover.

SITC of High-End Switch Sockets for Lighting SB and 5/15A Raw Points in Director’s Cabin and Conference Room. Basic Plate Switch Socket Cost Considered at Rs. 5000 per Room. Approved Make: Norisys or Equivalent.

Supply and Installation of 300x300mm Floor Boxes with 2 x 15A Power Points, SS Removable Cover, Flush to Flooring.

Fire Extinguishers Supply and Installation. Approved Make: Varsha Fire, Agni, or Equivalent.

4.5 KG CO2 Type Fire Extinguisher.

2 KG ABC Type Fire Extinguisher.

2 KG Clean Agent Type Fire Extinguisher.

Ceiling Suspended Auto Fire Extinguisher – 5 KG.

Decorative Lighting Supply and Installation.

LED Cove Lights – 10W/Meter with Required Driver Set. Approved Make: Wipro or Equivalent.

COB Lights 18W. Approved Make: Panasonic, Hybec or Equivalent.

Decorative Lights – Customized, Hybec, White Teak or Equivalent.

25W Downlights. Approved Make: Panasonic, Hybec, or Equivalent.

Supply, Installation, Testing & Commissioning (SITC) of Electrical Panels and DBs as per Specifications.

SITC of Floor/Wall Mounted Cubicle Type Panels fabricated from 14/16G CRCA Sheet Steel, fully compartmentalized with separate busbar and cable chambers. Includes 7-tank powder coating for rust proofing, front/back access for switchgears, connectors, 3mm gland plates on top and bottom, 75mm height channel base frame, proper labeling of all chambers. Suitable for 430V, 3-phase, 4-wire system at 50Hz, 50°C ambient. Approved Make: Legrand, Schneider, or Equivalent.

SITC of 63A 4P RCBO, 100mA with IP65 Enclosure Box.

MAIN ELDB - 32A 2P MCB 10kA (1 No), 20A 2P MCB (6 Nos).

SITC of Distribution Boards complete with MCBs/Isolators, Busbars, and Interconnections. All DBs to be of specified make only (no fabricated DBs allowed). Includes proper MCB numbering, DB chart, DB number marking. DB to be fixed using anchor fasteners and GI L-angle, with proper earthing at 2 locations. Cable trays/raceways for DB drops to be earthed using 12 SWG Cu wire with lugs. Approved Make: Legrand, Schneider, or Equivalent.

TPN LDB - Wall Mounted MCB Double Door DBs (Powder Coated 16/18G CRCA Steel). Incomer: 32A 4P MCB C Curve. 32A DP RCBO 30mA (3 Nos). Outgoing: 10A SP MCBs (30 Nos) C Curve. For Terrace.

TPN RDB - Wall Mounted MCB Double Door DBs (Powder Coated 16/18G CRCA Steel). Incomer: 63A 4P MCB C Curve. 63A DP RCCB 100mA (3 Nos). Outgoing: 16/25A SP MCBs (36 Nos) C Curve.

TPN UDB - Wall Mounted MCB Double Door DBs (Powder Coated 16/18G CRCA Steel). Incomer: 32A 4P MCB (1 No, D Curve). 32A DP MCB (3 Nos, D Curve). Outgoing: 20A SP MCBs (12 Nos, D Curve).

SPN ELDB - Wall Mounted MCB Double Door DBs (Powder Coated 16/18G CRCA Steel). Incomer: 32A DP RCBO (1 No, 30mA, C Curve). Outgoing: 10A SP MCBs (12 Nos, C Curve).

Supply, Installation, Testing & Commissioning (SITC) of IP CCTV Surveillance System Components as per Specifications.

SITC of 2MP IP-Based Dome/Network Camera with 1/3″ Progressive Scan CMOS Imager, Capturing 2304×1296 (20 fps)/Full HD 1080p (25/30 fps) Images. Equipped with 3.6mm Fixed Lens, IP66 Waterproof Enclosure, True Day/Night Solution, Smart IR Technology with 100 ft (30m) IR Illumination, 12V DC Power Input. Includes Camera Mounting Back Box and MS Fixing Bracket (6-8 feet long, 20mm Rod) with All Required Supports and Hardware. Approved Make: Hikvision or Equivalent.

SITC of 8-Channel NVR with 2 SATA HDD Slots (2 x Max 8 TB), ATX Power, Realtime Recording Resolution (8 Channels @ 4MP), Realtime Local Playback, Multiplex Operation, H.264 High Profile Codec, BNC/VGA/HDMI Output, HDD Redundancy, Free DDNS, Network Backup, USB/SATA Writer, 1 RS485, Supports 18 PTZ Protocols, ONVIF 2.0, 1 Channel Audio In/Out, 8 Channel Alarm Input and 16 Channel Alarm Output. Includes Free Software Supply and Installation. Approved Make: Hikvision or Equivalent.

Supply and Installation of 6TB Surveillance-Grade HDD Compatible with NVR Systems.

Supply and Installation of 8-Port PoE Network Switch for IP CCTV Applications. Approved Make: Hikvision or Equivalent.

Supply and Laying of Cat 6 Cable in FRLS PVC Conduit, Inclusive of Cable, Conduit, I/O Box, Patch Cords, and Complete Crimping at Both Ends. All Accessories Included for Turnkey Delivery. Approved Make: D-Link or Equivalent.

Supply and Installation of 6U Network Rack for Housing PoE Switch. Approved Make: CP Plus or Equivalent.

Supply and Installation of 24-Inch LED Monitor for CCTV Monitoring. Approved Make: Samsung or Equivalent.

Supply, Installation, Testing & Commissioning (SITC) of Access Control System Components as per Specifications.

SITC of Fingerprint + Card Readers with Cat 6 Connectivity, Suitable for Mounting on Gypsum, Metal, Wooden Frames, or Wall Surfaces as per Site Conditions. Includes All Accessories, Required Civil Works, and Integration with Attendance System. Approved Make: Hikvision or Equivalent.

Supply of 50 Proximity Access Control Cards (RFID/NFC), Compatible with Installed Access Control Readers. Cards to be ISO Standard, Durable, and Suitable for Daily Use. Includes Printing of Unique Card Numbers and Optional Personalization if Required. Approved Make: HID, Hikvision, or Equivalent.

SITC of Electromagnetic Locks (Fail Safe Type) with 600lb Holding Force, Door Feedback & Door Ajar Alarm Buzzer. Locks to be Suitable for the Following Door Types. Approved Make: Genex or Equivalent.

Electromagnetic Locks for Double Leaf Doors with U-Clamps.

Electromagnetic Locks for Single Leaf Doors with U-Clamps.

Supply and Installation of Magnetic Contacts for Door Monitoring.

SITC of 2-Door Controller with TCP/IP Connectivity and Integrated Power Supply Unit with Battery Backup.

Supply and Laying of 8 Core x 1.0 sq.mm Cable for Locks and Exit Switches, Complete with Terminations and Accessories.

Supply, installation, testing, and commissioning of a flexible 60 kVA online double-conversion UPS system with 3-phase input and output, unity power factor, advanced LCD monitoring interface, and integrated static and manual bypass for seamless power continuity to 41 high-performance AI workstations and 1 AI server. The system shall allow installation as a single 60 kVA unit or be flexibly divided into smaller capacities (such as 2 x 30 kVA or 3 x 20 kVA) to suit site conditions without requiring modular UPS architecture. Supported by a battery bank comprising 20 nos. of 12V, 100Ah VRLA SMF batteries configured at 240V DC, providing a minimum of 30 minutes backup at full load. Includes battery racks, interconnecting cables, protection devices, and compliance with IS/IEC safety standards. Preferred makes: APC, Vertiv (Liebert), Eaton, or Microtek.

Supply, installation, testing, and commissioning of a 2 kVA inverter system with battery backup for up to 45 minutes, including input and output enclosure boxes with MCB protection, necessary cabling, and complete installation. The system shall provide stable sine wave output suitable for critical loads and include all accessories for turnkey delivery. Approved make: Luminous or Equivalent.

FIRE DETECTION SYSTEM Supply, installation, testing, and commissioning of a complete Fire Detection System including addressable/manual call points, smoke/heat detectors, control panels, and all necessary accessories. The system shall be integrated with Building Management System (BMS), Access Control, Public Address (PA), and Electrical Systems for centralized monitoring and control.

Addressable Smoke Detector with Base: Equipped with binary coded address setting, dual LEDs for 360° visibility, sleek low-profile housing design, and 100mm base suitable for below false ceiling installations. IP Rating: IP42. Approval: UL Listed.

Addressable Manual Pull Station: Single-action type, complete with mounting accessories.

Addressable Monitor/Control Module: For interfacing field devices with the fire alarm control panel. Approval: UL Listed.

Addressable Relay Module: To control external devices through fire alarm events. Approval: UL Listed.

Sounder/Hooter with Strobe: Minimum sound level of 90 dB at 10 feet height, complete with required control module for synchronized operation.

Response Indicator: Twin LED type, flush mounted on false ceiling/wall for remote indication of detector activation.

2 Core x 1.5 mm² Multistranded AT Copper FRLS Armoured Cable (RED): Laid on surface using GI saddles and spacers at 0.3-meter intervals, complete with GI junction boxes, lugs, cable glands, cable tags, and proper ferruling as per standards.

HVAC WORKS High Side HVAC Works (Outdoor Equipment and Power Supply)

Supply of 16 HP Top Discharge VRF Outdoor Unit.

Installation, Testing, and Commissioning of ODU including placement, vibration isolation, and required hardware.

Supply and Installation of Power Cabling for ODU with Proper Terminations.

Refrigerant Gas Charging for ODU as per Manufacturer Standards.

Low Side HVAC Works (Indoor Distribution and Final Delivery) Supply of high-efficiency VRF-compatible indoor units suitable for general office or lab spaces, complete with cordless remote controls. [Make: Carrier or Equivalent].

Supply of 2 TR (2.5 HP) Indoor Units

Installation, Testing, and Commissioning of IDUs with Cordless Remotes, including Indoor Hanger Supports.

Copper Piping for VRF SYSTEM

Supply, installation, testing & commissioning of refrigerant copper piping & joints connected between evaporator unit & condenser units covered with 19 MM Nitrile foam insulation.Class O to be considered.

Supply and Installation of Refnets for VRF System.

Supply and Installation of Insulated Hard PVC/HDPE Drain Piping with 10mm Nitrile Rubber Insulation.

25mm Diameter

32mm Diameter

Supply and Installation of Copper Communication Cables for IDU Integration.

Supply and Installation of Power Cables for IDUs

Supply and Installation of Installation of 3 pin top with power cable

Supply and Installation of MS Galvanized, Enamel-Painted Stands for ODU Units

Loading, Unloading, Transportation & Mathadi Charges.

Data Networking - Passive (Panduit Pannet, Siemon, Systimax only) Passive Network Should Support 10 Gig or above Supply and installation of 500 MHz Category 6A FTP copper twisted pair cables, including pulling through PVC pipes, aluminium raceways, junction boxes, and other necessary conduits as per interior drawings and site requirements.

Supply, installation, testing, and termination of fully loaded 24-Port 1U Patch Panel (Red) using IOS with tool-free terminations. Termination and testing shall be carried out using a calibrated Fluke meter, and a 20-year site certification is mandatory for submission.

Supply, installation, testing, and termination of Category 6A Information Outlet (Red Colour) using IOS with tool-free terminations. All terminations shall be tested with a calibrated Fluke meter, and a 20-year site certification is mandatory for submission.

Supply and installation of 2-meter Category 6A patch cords (Red Colour) with 50 micro-inch gold-plated contacts, tangle-free design, and free-rotate Panduit patch cord labels.

Supply and fixing of dual-port faceplates with all required hardware, including machine-printed laminated labels for proper identification.

Data Networking - Active (Juniper, Cisco Nexus ) Supply, installation, and configuration of Juniper Mist Wi-Fi or Cisco 9124AX Series Access Points with cloud controller and required internet service packages, including three years Next Business Day (NBD) hardware replacement warranty and software subscription pack for centralized management and advanced security features.

Supply, installation, and configuration of Juniper or Cisco Nexus series switches with three years onsite support warranty, featuring the following specifications: • 48 modular 10 Gigabit ports fully loaded with copper modules. • Minimum 4 copper PoE 2.5G Multigigabit ports to support high-performance access points. • Switches should be stackable and configured in a stacked setup for efficient performance, centralized management, and high availability. • Complete with all required modules, stacking cables, accessories, and professional configuration. Preferred makes: Juniper EX/Nexus Series or Cisco Nexus Series with equivalent specifications.

Supply, installation, and configuration of Palo Alto Firewall 440 Series with the following specifications: • Includes global warranty and comprehensive software bundle covering Threat Prevention, Antivirus, Anti-Spyware, URL Filtering, and WildFire cloud-based malware analysis. • The firewall solution must be quoted with full failover capability ensuring 100% redundancy (Primary and Secondary in Active-Passive or Active-Active configuration). • Includes three years of onsite support with Next Business Day (NBD) hardware replacement and software updates. • Complete with required licenses, subscriptions, and all necessary accessories for seamless deployment. Preferred Model: Palo Alto PA-440 Series with Advanced Threat Prevention Bundle and High Availability License.

AV over IP Solution (Crestron, Extron, Atlona, AMX) Supply, mounting, configuration, and onsite support for AI-enabled PTZ camera with automated PTZ functionality, Full HD/4K resolution, minimum 12x optical zoom, AI-based auto-framing and speaker tracking. Includes required mounting accessories and three years onsite warranty.

Supply, installation, configuration, and onsite support for a 4×2 AV Matrix Switcher with USB-C®, DisplayPort™, and HDMI® inputs, supporting AV, data transfer, and device charging over USB-C. Includes three years onsite support warranty.

Supply, installation, configuration, and onsite support for a compact, versatile switcher and HDBaseT transmitter with USB-C and HDMI inputs, supporting video up to 4K/60 4:2:0, embedded audio, control signals, and USB 2.0 over distances up to 100 meters (330 feet). Includes three years onsite support warranty.

Supply, installation, configuration, and onsite support for a compact distribution amplifier and HDBaseT transmitter with USB-C and HDMI inputs, supporting video up to 4K/60 4:2:0, embedded audio, control signals, and USB 2.0 extension over distances up to 100 meters (330 feet). Includes three years onsite support warranty.

Supply only of HDBaseT™ extender kit for HDMI®, supporting transmission up to 230 feet (70 meters).

Supply, installation, and activation of 4-input video processor with HDMI and IP inputs, featuring source scaling, seamless switching, and vision mixing. Supports RTMP, RTMPS, MPEG-TS, TCP, and UDP streaming protocols.

Supply of HDMI to USB-A Converter for seamless video and audio signal conversion - Magwell / Cypress make

Supply, installation, and configuration of Interactive 105" Display (LG or Samsung) with tilt-and-turn Lumen make mounting clamp, including all necessary accessories for secure installation and operational readiness.

Supply, installation, and configuration of 55" Display (LG or Samsung) with complete carpentry work for tilting the frame and finishing edges, including all necessary hardware and accessories.

Supply and installation of 36U Smart Cabinet with built-in accessories, capable of handling a minimum load of 10 kVA. The cabinet should include integrated power management, cooling support provisions, cable management, and security features. Preferred makes: Vertiv, Heshmesh, or Rittal.

Supply and installation of Interactive Smart Podium with built-in speakers and microphone, featuring a touch-enabled interactive display. The podium shall include external HDMI connectivity with integrated switcher for seamless device integration.

Supply only of HDMI cables, 10 meters length, supporting high-speed data transfer with 4K resolution compatibility and gold-plated connectors.

Supply and installation of Sennheiser TeamConnect Ceiling 2 microphone system, providing seamless audio capture with coverage of up to 80 m². Ideal for larger meeting rooms, lecture halls, and collaboration spaces, offering advanced beamforming technology for crystal-clear audio. Includes all necessary accessories for installation and configuration.

Supply, installation, and configuration of Xilica Micro-Format DSP Core with 4x4 Dante™ networking, 8 I/O card slots, PoE power, Lua scripting engine, and optional HearClear AEC license. Includes surface-mount bracket.

Supply and installation of power amplifier for speakers, suitable for high-fidelity audio output and compatible with installed speaker systems - Sennheiser, Yamaha, Bose make

Supply and installation of surface-mount speakers with necessary mounting accessories, ensuring optimal sound coverage and aesthetic integration - Sennheiser, Yamaha, Bose make

Supply, installation, and configuration of hardware server gateways for AV system control, room scheduling, and device management, with web browser-based access for easy setup and centralized management.

Supply of Apple iPad with 10.2-inch LED-backlit Multi-Touch display featuring IPS technology, 2160x1620-pixel resolution at 264 ppi.

Consulting Comprehensive consultancy for interior layout planning, AV integration, networking infrastructure, lighting design, and coordinated technical drawings with specification support.