RequiredExperience with Government
RequiredCertificate (Requested in ATC) Bid to RA enabled No Solar Micro Pumping Systems ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Conformity to Indian Standard Ministry of New and Renewable Energy
RequiredSOLAR PHOTOVOLTAIC WATER PUMPING SYSTEMS For MICRO PUMPING Applications (2016-17) * Solar Photovoltaic (SPV) Water Pumping System Solar Photovoltaic (SPV) Water Pumping Systems are basically * 1/9 for “MICRO PUMPING”applications. However
Requiredthese may also be used for “Drinking Water Applications wherever such capacities are required Model Number as per MNRE specification Model-II Model-II Motor Capacity 0.5 0.5 PV Array (Wp) 500 Wp 500 Wp Shut Off Dynamic Head 45 45.0 PV ARRAY Operation of SPV Pumping System The SPV water pumping system should be operated with a required PV array capacity measured under Standard Test Conditions (STC). * Number of modules in series and parallel could be used to obtain the required PV array power output 16 * The power output of individual PV modules used in the PV array
Requiredunder STC (in Watts Peak) 300 * Source of PV Module Indigenously produced PV module (s) containing mono/multi crystalline silicon solar cells * PV module certification Certificate as per IEC 61215 specifications or equivalent National or International Standards * Safety Qualification Testing Modules must qualify to IEC 61730 Part I and II for safety qualification testing * Efficiency of the PV module (%) 15.38 * Fill factor for PV module (%) 75.59 * 2/9 The terminal box on the module should have a provision for “Opening” for replacing the cable
Requiredif required Yes * Dimension of PV module (mm x mm x mm) - * PV Array should be mounted on a suitable structure with a provision for manual tracking Yes * Marking On PV module Name Plate fixed inside the module which will give: a. Name of the Manufacturer or Distinctive Logo. b. Model Number c. Serial Number d. Year of manufacture e. Made in India (Subscribe in words) * Motor Pump Set Types of motor pump set Submersible Pump Submersible Pump Pump set type A.C. Induction Motor Pump Set with a suitable Inverter A.C. Induction Motor Pump Set with a suitable Inverter Numbers of poles of motor 2 * Motor Speed(in rpm) 2829 * Bore Size 150 * Delivery Size 100 * Suction Head for surface pump 6 meter * The suction/delivery pipe (GI/HDPE)
Requiredelectric cables
Requiredfloating assembly
Requiredcivil work and other fittings required to install the Motor Pump set yes
Requiredinclusive * Material of Suction Pipe ISI Marked HDPE Pipe to IS 4985 * Length of Suction Pipe 15 * Material of Delivery Pipe ISI Marked HDPE Pipe to IS 4985 * Length of Delivery Pipe 20 * 3/9 Pump Material construction of the pump be made using parts which have a much higher durability and do not need replacement or corrode for at least 5 years. * Marking on Motor pump The following details should be marked indelibly on the motor pump set a) Name of the Manufacturer or Distinctive Logo. b) Model Number. c) Serial Number. * MOUNTING STRUCTURES AND TRACKING SYSTEM Mounting on metallic structures The PV modules should be mounted on metallic structures of adequate strength and appropriate design * Mounting Structure Type Pole type structure * Strength of mounting structure suitable to withstand load of modules and high wind velocities up to 150 km per hour * The support structure used in the pumping system should be hot dip galvanized iron with minimum 80 micron thickness Yes * Tracking system Manual * Arrangement for seasonal tilt angle adjustment For manual tracking
Requiredarrangement for seasonal tilt angle adjustment and three times manual tracking in a day should be provided * Remote monitoring of Pump Provision for remote monitoring of the installed pumps must be made in the controllers or the inverters either through an integral arrangement or through an externally fitted arrangement * Provision to ascertain the daily water output
RequiredYes * 4/9 the power generated by the PV array
Requiredthe UP TIME of the pump during the year
RequiredNumber of days the pump was unused or under breakdown/repairs ELECTRONICS AND PROTECTIONS IP protection for Inverter to operate an AC Pump The inverter must have IP 54 protection or must be housed in a cabinet having at least IP54 protection. * Controller for BLDC motor driven pumps Controller for BLDC motor driven pumps
Requiredif required be used. The controller must have IP 54 protection or must be housed in a cabinet having at least IP 54 protection * Adequate protections should be incorporated against dry operation of motor pump set
Requiredlightning
Requiredhails and storms Yes * Full protection against open circuit
Requiredaccidental short circuit and reverse polarity should be provided Yes * On/Off Switch A good reliable switch suitable for DC use is to be provided. Sufficient length of cable should be provided for interconnection of the PV array
RequiredController Inverter and the motor pump set. * Spares Required Spares for trouble free operation during the Warrantee period should be provided along with the system. * Operation And Maintenance Manual An Operation and Maintenance Manual
Requiredin English and the local language
Requiredshould be provided with the solar PV pumping system. The Manual should * 5/9 have information about solar energy
Requiredphotovoltaic
Requiredmodules
RequiredDC/AC motor pump set
Requiredtracking system
Requiredmounting structures
Requiredelectronics and switches. It should also have clear instructions about mounting of PV module
RequiredDO's and DONT's and on regular maintenance and Trouble Shooting of the pumping system. Name and address of the person or Centre to be contacted in case of failure or complaint should also be provided. A warranty card for the modules and the motor pump set should also be provided to the beneficiary. PERFORMANCE For 1/4 hp Motor Pump Set and 300 Wp Solar Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 10 metres and the shut off head being at least 12 metres Minimum 10
Required000 liters of water per day * FOR 1/4 hp Motor Pump Set and 300 Wp Solar Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 20 metres and the shut off head being at least 30 metres Minimum 5
Required000 liters of water per day * FOR 1/4 hp Motor Pump Set and 300 Wp Solar Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 30 metres and the shut off head being at least 45 metres Minimum 3
Required000 liters of water per day * FOR 1/2 hp Motor Pump Set and 500 Wp Solar Minimum 20
Required000 liters of water per day * 6/9 Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 10 metres and the shut off head being at least 12 metres FOR 1/2 hp Motor Pump Set and 500 Wp Solar Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 20 metres and the shut off head being at least 30 metres Minimum 10
Required000 liters of water per day * FOR 1/2 hp Motor Pump Set and 500 Wp Solar Panel Minimum water output from a Solar PV Water Pumping System from a Total Dynamic Head of 30 metres and the shut off head being at least 45 metres Minimum 6
Required000 liters of water per day * CERTIFICATION BIS CM/L number and validity of ISI marked Pump Set - * Availability of Type Test Report to prove conformity of parameters as per MNRE specification form MNRE empanelled for solar pump laboratory Yes * Test Certificate No and Date - * Name of the Lab where test Conducted - * Test Report to be furnished to the buyer on demand Yes * Scope of Supply with errection and commissioning at consignee end * Warranty The PV Modules must be warranted for output wattage
Requiredwhich should not be less than 90% at the end of 10 years and 80% at the end of 25 years. The * 7/9 whole Pumping system including pump shall be warranted for 5 years. * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
