State Plan-Providing Septage Treatment facility in 5 MLD STP at Elamkulam-Interim arrangements-STP at Ernakulam-General Civil Work

Amount

Working charges

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

2.22.1:Open timbering over areas including strutting, shoring etc. complete (Measurements to be taken of the face area timbered):Depth not exceeding 1.5 m

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

100.10.1:Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 90mm Nominal Outer Diameter pipes.

100.10.2:Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 110mm Nominal Outer Diameter Pipes.

100.10.5:Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 160mm Nominal Outside Diameter Pipes.

100.98.1008:Engaging Coolie.

OD239081/2022-2023:Supply & fixing of non clog submersible,sewage pump set-5 HP ,Including suitable starter, cable,Non return Valve..etc..All complete allied works.

OD225958/2022-2023:SS Gates :- Supply at site installation testing and commissioning of all materials ,fabricating , fixing and commissioning of spindle operated open channel sluice gates/shutter of DI makeat the inlet point of channel to suite the channel size as per drawing and specification and as directed by Engineer in Charge

OD226551/2022-2023:Fabricating and fixing MS Gratings in grit channel using MS round bars and channel sections including cutting,welding and fixing in position all complete.

100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.

100.37.1:Cutting M.S. sheet, pipe and specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete.

100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete.

100.37.3:Welding M.S. sheet, pipe and special by gas or electric plant for three run welding including cost of welding rod / gas, all labour and hire charges of tools etc., complete.

100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

COST OF MATERIALS

100.98.154:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 90mm Outer Dia.

100.98.155:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 110mm Outer Dia.

100.98.138:Supply of HDPE Pipe PE 100 (IS 4984/1995), 8kg, 160mm Outer Dia.

OD226387/2022-2023:Supply of 80mm Gi pipe with specials As per Technical circular NO.KWA/JB/TMU/4659/2021,br>30.04.2021-

OD226441/2022-2023:Supply of 100 mmGI pipe with specials As per Technical Circular No.KWA/JB/TMU/4659/2021<br>30.04.2021-

OD226453/2022-2023:Supply of 150 mm GI PIPEwith specials As per Technical Circular NO.KWA/JB/TMU/4659/2021<br>30.04.2021-

100.98.484:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm.

OD226474/2022-2023:Supply of Gun Metal valve 80mm dia

Electrical works

OD241597/2022-2023:Glanding and termination of 3.5 x70 sq.mm aluminium armoured cable using Siemens type plated brass cable gland, aluminium crimping sockets and accessories etc.complete at both ends

OD241598/2022-2023:Supplying and laying XLPE Insulated PVC, Innersheathed, Armoured aluminium conductor 3.5 core x 70 sq mm cable from Subswitch board to Pannel board

OD241599/2022-2023:Fabrication, supply, errection, testing and commissioning of cubicle free standing pattern vermin proof indoor type Pannel board sutiable to carry 100 A 3 phase, 4 wire A/C supply system using 14 guage CR sheet for compartment construction such as switches, bus bars and cable live parts shrouded with sutiable FRP sheets, DMC/SMC bus bars supporters, concealed door hinges, flexible earth connections to the doors where the supply is extended with voltmeter and indication lamps, base channel frame with mounting holes and the whole unit is painted with powder coating of approved colour panel board should be as per State Electrical Inspectorate specification and standards with the following( All switches are L & T / approved make)

Bidder Name

Contract