Loading
Loading…
Loading…
Tender Value
₹6.9 Cr
EMD Value
₹4.9 L
Closing Date
4 Feb 2026, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
SNT TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where, V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
SIMILAR NATURE OF WORK: Any Telecom work.
5 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Checklist for Tenderer: The Tenderer shall submit signed copy of Check-list placed in documents attached with tender. The Tenderer shall also submit relevant documents of compliance of the checklist if any.
I/We have read the tender notice (NIT)detail, schedule of material and works and Tender document along with all the conditions attached/referred to, in this tender document and agree to abide by the said conditions.
It is certified that i am the authorized person to represent the firm and I am authorized to sign the tender and all the document on behalf of the firm.
I/We hereby agree to abide by the Indian Railway Standard General Condition of contract (GCC) with all correction slip up to date and to carry out the work according to the special conditions of contract and specification of material and works as laid down by Railway as mentioned in the tender document.
Supply, Installation, Testing and commissioning of Laying/Replacement of 6 Quad cable and OFC cable in Damnagar (DME) -Liliya Mota (LMO), Chuda (CDA)- Limbdi (LM), Gadhakada (GKD)- Vijapadi (VJD), Dhasa (DAS)- Damnagar (DME), Rajula City (RJU)- Rajula Jn. (RLA), Kundli (KDI)- Ranpur(RUR), Ranpur (RUR)- Chuda (CDA), Botad Jn. (BTD) - Lathidad (LTD), Lathidad (LTD)- Ningala (NGA) , Ningala (NGA) - Alampar (ALMR), Alampar (ALMR) -Ujalvav (UJ), Ujalvav (UJ) - Dhola Jn. (DLJ) PRCL section of Bhavnagar Division (Phase-III).
49-2025~WR
49-2025
Open
Works - General
24 Months
Bhavnagar, Gujarat
₹0
₹4.9 L
4 Feb 2026
13 Jan 2026
21 Jan 2026
86 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,73,22,624.2 | ||
| — | 2000.00 | — | — | ||
| Supply of DWC pipe (6 mtrs length) of size 78mm outer diameter and 63.5 mm inner diameter. | — | — | — | 2,23,840 | |
| — | 6000.00 | — | — | ||
| Supply of 100 mm internal dia and 3.65mm +/- 10%thickness G.I pipe conforming to IS:1239 (Pt.I)-2004 or latest with sockets and fittings. GI pipe shall have ISI mark on it. | — | — | — | 38,88,720 | |
| — | 400.00 | — | — | ||
| Supply of MS Angle for preparation of J type clamp, 25mm dia MS nut and bolts (02 nos.) with water sealed arrangement for fixing prepared J type clamp with ballast retainer wall and hot dip galvanizing of same of same for carrying out of 24 fibers OFC/HDPE/GI Pipe (dia 100 mm) on Major Bridges. | — | — | — | 6,72,248 | |
| — | 800.00 | — | — | ||
| Supply of MS Plate for preparation of J type clamp, 25mm dia MS nut and bolts (02 nos.) with water sealed arrangement for fixing prepared J type clamp with ballast retainer wall and hot dip galvanizing of same of same for carrying out of 24 fibers OFC/HDPE/GI Pipe (dia 100 mm) on Minor Bridges. | — | — | — | 7,57,664 | |
| — | 50.00 | — | — | ||
| Supply of 20 pair Cable Termination Box | — | — | — | 1,89,650 | |
| — | 2.00 | — | — | ||
| Supply of Maintenance tools kit as per TEC specification no. GR/OFT-01/03 APR 2005 or latest, one set consisting of following: - 1) Digital multi meter 4 1/2 digits with Liquid crystal Display 1 No. of Phillips/Motwane Make. 2) Utility Knife-1No. 3) Cable Slitter -1No. 4) Tubing cutter for cable armour -1No. 5) Bare Fiber adaptor -1No. 6) Miller Height precision stripper for fiber buffer -1No. 7) Cleaver Fujkura make or similar- 1No. 8) Mechanical splice joint set - (1 set consisting of 6 Nos). 9) Ceramic Scissor- 1No. 10) FC/PC Adapter with DB loss- 10No. 11) Optical Fiber terminal block V groove-2 No. 12) Earth resistance measuring instrument with all accessories suitable for measuring earth resistance in range of 0.1 Ohms to 10 Ohms. 13)Megger Philips or Motwane: 500 V -1 No. and 100 V -1 No. 14) Loose tube stripper -1 No. 15) Cord stripping pliers -1 No. 16) Supply of Krone tool -1 No. Note: All the tools have to be standard/imported makes, to be approved by Railways before supply. The above tools shall be supplied in Briefcase Make Safari or Aristocrat with centre lock. | — | — | — | 3,77,212.44 | |
| — | 2.00 | — | — | ||
| Supply of HQ Control Room Equipment as per RDSO Specification no. RDSO/SPN/TC / 66/2007. | — | — | — | 2,09,170.62 | |
| — | 2.00 | — | — | ||
| Supply of Test Room Equipment as per RDSO Specification no. RDSO/SPN/TC/ 66/2007 | — | — | — | 2,09,170.62 | |
| — | 12.00 | — | — | ||
| Supply of Multi Telephone Way station Equipment as per RDSO specification RDSO/SPN/TC/66/2007 Rev.0 compatible with the existing equipment installed in division of Marvel make. | — | — | — | 6,73,333.92 | |
| — | 175.00 | — | — | ||
| Supply of Thermo Shrink Cable Jointing Kit for Quad Cable of 0.9 mm dia as per the RDSO specification. | — | — | — | 5,11,313.25 | |
| — | 145.00 | — | — | ||
| — | — | — | 3,88,392.65 | ||
| — | 145000.00 | — | — | ||
| — | — | — | 89,13,150 | ||
| — | 4000.00 | — | — | ||
| Supply of 6 Core single mode armored optical fiber cable with required termination and accessories for connecting field. OFC shall meet the technical parameter of RDSO specification No. IRS:TC 55- 2006 Revision 1.0 or latest. | — | — | — | 1,16,520 | |
| — | 4000.00 | — | — | ||
| Supply of 25mm PVC pipe (25mm PVC Conduit Pipe ISI mark standard make duly drawing power / Telecom cable as per instruction of site, including all accessories clamp, L & band Joint). | — | — | — | 55,640 | |
| — | — | — | 5,13,30,053.06 | ||
| — | 145.00 | — | — | ||
| Cable Route Survey &Preparation of as built final cable route and other plans (for Quad cable as well as other telecom cables whose laying is covered in this schedule). | — | — | — | 1,79,351.95 | |
| — | 2900.00 | — | — | ||
| Supply and installation of RFID based electronic cable/pipe marker 22.5cms dia 1.5 m Depth range, 10 Digit Hexadecimal ID code 101.4khz frequency (Inspection: RITES) | — | — | — | 82,76,281 | |
| — | 1.00 | — | — | ||
| Supply and installation of RFID Marker locator ,8000 marker records, built in GPS module,1.5m depth range 4x20 Digits LCD display. (Inspection: Consignee/Site Incharge) | — | — | — | 3,45,470.73 | |
| — | 40500.00 | — | — | ||
| Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m. | — | — | — | 2,26,79,595 | |
| — | 480.00 | — | — | ||
| Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300 mm deep in hard rock (Drg prepared by contactor & approved by Engineer In charge) for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his representative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. Refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a separate item in the schedule of work. | — | — | — | 2,42,760 | |
| — | 500.00 | — | — | ||
| Cement concrete work for miscellaneous items in the ratio 1: 3: 6. Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor). | — | — | — | 31,62,505 | |
| — | 2000.00 | — | — | ||
| Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge. Note: DWC pipe supply is taken as separate item. This item also includes cable laying (HDD boring). | — | — | — | 32,08,940 | |
| — | 3000.00 | — | — | ||
| Cutting of platform with tile/rock cutting machine or manually to 30 cm depth and 12 cm wide approx. by removing slabs/tiles neatly and re-filling the trench with the excavated soil and restoring the top surface to its original condition with smooth finish. | — | — | — | 2,92,830 | |
| — | 1500.00 | — | — | ||
| Fixing of 100 mm dia GI pipes to carry all the cable at the cabins, Stations, cable huts & other buildings etc., | — | — | — | 32,025 | |
| — | 4500.00 | — | — | ||
| Fixing of GI pipe (100 mm dia.) on Major/Minor/Culverts bridges using above supply item. (Sr. No.) | — | — | — | 25,46,550 | |
| — | 145000.00 | — | — | ||
| Laying of 6 Quad cable in excavated trench | — | — | — | 11,57,100 | |
| — | — | — | 39,300 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-uptoACS10_merged_compressed.pdf
ATTACHMENT
SignedJPOBVPDivisionforundertakingdiggingworkinthevicinityofSTandElectricalcablesmerged..pdf
ATTACHMENT
CHECKLISTFORTENDERERmorethan50Lacs.pdf
ATTACHMENT
SCHEDULEOFMATERIALANDWORKphase-IIIwithAnnexure-I.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .