Repair of Excise and Taxation Residential Building at Nahan, Sirmaur (HP)

Amount

Demolition above G.L. upto floor two level unserviceable materials within 20 Metres lead. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duey vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying granite stone in flooring 20 mm(average) thickness base of including carriage of cement mortar 1:3 (1cement:3 sand) laid over and jointed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab rubbing and polishing complete. 25 mm thick. including including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all lead with:- Cement Mortar 1:5 (1 Cement : 5 Sand) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Excavation in drains and channels etc,in all kinds of soil such as pick work,Jumper work,Blasting work by blasting or chiselling or in any other intermediate classification of soil in dry or saturated conditions,including timbering,shoring,strutting,pump including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing under layer for plinth protection of 75mm(Seventy Five milimeter) thick un consolidated bed of dry bricks/stone aggregate 40mm(Forty milimeter) well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing plinth protection 50mm(Fifty milimeter) thick in cement concrete 1:3:6(one cement:three sand:six graded/crushed stone aggregate 20mm(Twenty milimeter)mechanically mixed including finishing the top surface to concrete smooth finish. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Constructing course rubble hammer dressed " U" shape open surface drain with side walls 15x25cm(Fifteen into Twenty Five centimeter) in cement mortor 1:6(one cement:six sand) and in site plastering with cement plaster 1:3(one cement:three sand) including earth work and laying 10cm(Ten centimeter) cement concrete 1:5:10(one cement:five sand:ten graded/crushed stone aggregate 40mm(Forty milimeter) nominal size) and 7.5 cm(Seven point Five centimeter) cement concrete 1:2:4(one cement:two sand:four graded stone aggregate 20mm(Twenty milimeter) nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge.

Dismantling doors, windows and cleres ory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all lead. Not exceeding 3 sq.m in area including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including all leads and lifts as per the direction of Engineer-in Charge. Sal wood. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing panelled glazed of panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete 40mm(forty milimetre)thick 2nd class deodar including all leads,lifts and carriage of materials completeas per entire satisfaction of the Engineer.

Providing and fixing 2nd class deovdar wood 40mm (forty milimetres) thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 (eighty five grame) G. with wire of dia 0.56 (zero point fifty six metres) ) m for doors windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary Plain Glass 4 mm thick. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolts anodised transparent or died to required shade and colour with bolts,nuts and screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.. (a) 250 X16 mm( Two hundred fifty into Sixteen milimeter)

Providing and fixing anodized aluminium handles anodised transparent or died to required shade and colour with screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. 125mm.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.250x10mm including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing bright finished M.S. hydraulic door closer. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge..

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Applying priming with cement primer coat on new concrete/Masonry/ asbestors cement/plastered surface and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with : Ready Mixed primer including carriage of materials with in all leads and other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Finishing wall with weather proof exteriior grade emulsion of approved design (apexultima ) or its equarlied on undecorated wall surface (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dir, dust and other foreign matter etc including sand paper smooth complete

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With white readymixed paint .including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.a) with enamel paint other than white.

Providing and fixing geyser 25 ltr. with in all complete including carriage of materials leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.)

Providing and fixing. Brass angle valve 15mm (fifteen milimetres) without nuts and pipe including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P. brass bib tap with captain head 15mm dia including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing bright finished hard drawn hooks and eyes. 300 mm including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level: 1000 litres net capacity tank. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S brackets painted white including cutting holes & making good the same but excluding fittings 630mm x 450mm ( six hundred thirty into four hundred fifty milimetre) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing kitchen sink stainless steel kitchen sink of approved standard ISI make with drain board and CP. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 460 mm with bowl depth 200mm. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamps including making good the wall,ceiling and floor 15 mm(Fifteen milimeter) nominal bore. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 32mm(Thirty Two milimeter) dia.lead waste pipes for wash besin or sink including brass check nut including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 10.0/12.50/15.00(Ten /Twelve point Five/Fifteen) liters PVC China low level flushing cistern with a pair of C.I. Or mild steel brackets ,complete with fittings such as lead valveless syphon,15mm(Fifteen milimeter) nominal size brass ball valve with polythene float, C.P. Brass handle union and coupling for connection with inlet,outlet pipe and over flow pipes, 40mm (forty milimetre )dia C.P. flush bend including cutting holes in walls and making good and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China water closet squatting pan (Indian type WC pan ) size 580mm (five hundred eighty milimetre) ( earth work,bed concrete, foot rest and trap to be measured and paid for separately (Orrisa Pattern) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China water closet squatting pan (English type WC pan ) size 580mm (five hundred eighty milimetre) ( earth work,bed concrete, foot rest and trap to be measured and paid for separately (Orrisa Pattern) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing Chromium Plated brass soap dish C.P. brass brackets fixed to wooden cleats with C.P. brass screws including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing CP Brass towel rail complete with CP Brass bracket fixed to wooden plugs with CP Brass 750mmx20mm.(Seven hundred fifty into Twenty milimeter) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 600mmx450mm(Six hundred into Four hundred Fifty milimeter) bevelled edge mirror of superior glass mounted on 6mm(Six milimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing on wall face PVC (D-plast) rain water pipes including filling the joints with approved adhesive complete including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. 110 mm dia

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint In gratings framed guard bars,ladders,railling,brackets and similar works. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (One cement: two sand: four graded stone aggregate 20mm (twenty milimetre nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying Cement Concrete 1:4:8(One Cement: four Sand:Eight graded crushed stone aggregate 40mm nominal size) mechanically mixed and vibrated and curing complete excluding the cost of form work in foundation and plinth iincluding carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing weep holes in bricks/stone masonery plain/reinforced concrete abutment wing wall return wall with 100mm dia AC pipe extended through the full width of the structure with slope of 1 (v) :20 (H) towards drawing face complete as per drawing and technical specification clause 614,709,1204,3.7 including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

AQIB KHAN

Sanjeev Sharma

Rakesh Chaudhary

imIMRAN SHAH