Thrikkalangode Grama Panchayath Motor changing for drinking water projects in various wards Electrification- S0350/25Thrikkalangode Grama Panchayath Motor changing for drinking water projects in various wards Electrification- S0350/25

Amount

wiring

OD153153/2024-2025:Dismantling the existing motor pump set disconnecting all connection to motor, starter, main swich etc and lifting the the motor pump set from well dismantling the existing delivery pipe witout any damages etc as required.

OD55617/2024-2025:Dismantling the eisting unserviciable motor pump set and lifting from well and Supply, installation testing and commissioning of 100mm 5 HP 30 stage bore well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 28-170 Mts head of model ER43K/30 5HP 40mm (1.5”) D.O.L Deccan /CRI make or similler make delivery size 40 mm or nearest size having 60 LPM discharge 150 Mts head or nearest using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as pipe connected one by one to the motor up to the bottom of the well usingleak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.th sides of the motor including giving connection as per the direction at site.

OD153141/2024-2025:Dismantling the eisting unserviciable motor pump set and Supply, installation testing and commissioning of 5 HP 4 stage or nearest open well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 28-70 Mts head of model 5DQ 4 5 50mm (2") D.O.L Deccan /CRI make or similler make delivery size 50 mm or nearest size having 5 LPS discharge 57 m head or nearest using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as pipe connected one by one to the motor up to the bottom of the well usingleak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.th sides of the motor including giving connection as per the direction at site.

OD153188/2024-2025:Dismantling the eisting unserviciable motor pump set and Supply, installation testing and commissioning of 17.5 HP or nearest bore well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 145- 270 Mts head of model ERSS100 65mm (2.5”) 18 17.5 S.D Deccan (EKKI) /CRI make or similler make delivery size 63 mm or nearest size having 3.925 LPS discharge 235 m head or nearest using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as pipe connected one by one to the motor up to the bottom of the well usingleak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.th sides of the motor including giving connection as per the direction at site.

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

90.6.6.6:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.16 sq mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

OD48726/2024-2025:Supply threading, laying and joining of 40 mm or nerest size Submersible Column Pipe for bore well submersible pump Approved make specials as delivery pipe using required leak proofing materials etc. as required.

OD153150/2024-2025:Supply threading, laying and joining of 50 mm or nerest size Submersible Column Pipe for bore well submersible pump Approved make specials as delivery pipe using required leak proofing materials etc. as required.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD48727/2024-2025:2 X 25 mm X 3 mm G.I. strip test joint Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD48728/2024-2025:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD48729/2024-2025:Supply and providing 25x6mm brass nut and bolt etc. as required

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

90.14.24.6:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.6 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

OD55621/2024-2025:S & F Motor starters of the following ratings Submersible pump controllers with single phase and low voltage preventer for three phase 5 to 10 HP submersible motor pumps (DOL) and giving connections etc as required L&T make

OD153189/2024-2025:S & F Motor starters of the following ratings Fully automatic star delta pump starter for three phase 30 HP Submersible motor ( L&T make )

OD48730/2024-2025:supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED

OD48731/2024-2025:Supply and fixing Danger notice board of size, 125 x 75 mm

OD48732/2024-2025:supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

OD55623/2024-2025: Supply and providing 40 mm or nearest size stainless steel Hose Collar with hose clip

OD48734/2024-2025:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD55630/2024-2025:Supply and providing 40 mm or nearest size dia Flange set

OD55631/2024-2025:Supply and providing 40 mm or nearest size dia Full way valve (ISI)

OD55632/2024-2025: Supply and providing 40 mm or nearest size dia Gun Metal Non return valve (ISI)

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

OD48738/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535-STD-NF] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

OD48739/2024-2025:Supplying and fixing 63 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

OD48740/2024-2025:Supplying and fixing 63 A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD48741/2024-2025:Supply and laying suitable size plastic rope

OD55639/2024-2025:Supply, threading ,laying and jointing of the 40 mm "B' class GI pipe with all required accessories in ground in he existing trench as protective covering to UG Cable

OD153194/2024-2025:Supply, threading ,laying and jointing of the 63 mm or nearest size B class GI pipe with all required accessories as delivery pipe with necessary clampps and supprt of existing motor pump set etc as required as dierection at site.

OD48742/2024-2025: Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office

SHAHUL HAMEED V (BID ID -2114032)

Bidder Name

SHAHUL HAMEED V

SAKKARIYA P