Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.9 LAccepted-AOC | L-1 | Accepted-AOC Lowest-1 | |
| 2 | L-2₹16.8 L+₹1.8 L (12.3%)Rejected-Finance | L-2 | Rejected-Finance Lowest-2 | |
| 3 | L-3₹17.0 L+₹2.1 L (13.8%)Rejected-Finance | L-3 | Rejected-Finance Lowest-3 |
Tender Value
₹2.0 Cr
EMD Value
₹37,700
Closing Date
22 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer Jal Shakti Division Baggi
as per BOQ
2024_HPIPH_83999_1
EE-JSD-BAGGI/2023-30679-729 DT. 12/1/2024
Open Tender
Civil Works
Item Rate
180 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹400
EE Baggi
₹37,700
Yes
20 May 2024
13 Jan 2024
23 Jan 2024
13 Jan 2024
22 Jan 2024
13 Jan 2024
Amount
Excavation in foundation,trenches up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including bailing and pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting, planking, timbering & dewatering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus Excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge.
Providing & laying cement concrete 1:4:8 (1 cement : 4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and Plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing and laying cement concrete 1:1½:3 ( 1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:-
Lintle, columns, pillars, posts & struts upto floor two level complete in all respect with in all leads and lifts as per the entire satisfaction & directions of Engineer-in-Charge.
Foundation,footing & bases of columns and the like mass concrete complete in all respect with in all leads and lifts as per the entire satisfaction & directions of Engineer-in-Charge.
Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level complete in all respect with in all leads and lifts as per the entire satisfaction & directions of Engineer-in-Charge.
Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels complete in all respect with in all leads and lifts as per the entire satisfaction & directions of Engineer-in-Charge.
Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering shuttering struting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in:-
Vertical surface such as wall (any thickness) partition and the like including attached pillasters, butresses, etc. plinth and string course complete job in all respects with in all leads and lifts as per the direction and best satisfaction of Engineer-in-Charge.
Flat surfaces such as soffits of suspended floor, roofs, landing and the like complete in all respect complete in all respects as per the directions and best satisfaction of the Engineer-in-Charge.
Beams, cantilevers, girders & lintels Sides and soffites of beams beam haunchings, cantilevers, bresummers and lintels not exceeding 1mtr in depth in all heights from floor complete in all respect with in all leads and lifts.
Columns, pillars, posts and struts etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Stair cases with sloping or stepped soffits excluding landing complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Edges of slab and breaks in floor and walls under 20 cm wide complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing mild steel/tor Steel reinforcement for R.C.C work including bending, binding and placing in position complete up to floor two level complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Brick work using common burunt clay building bricks in super structure above plinth level upto flor two level 1st class bricks in cement mortor 1:6 (1 cement : 6 sand) complete job in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
6 mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth in C.M 1:6 ( 1 cement : 6 sand ) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing 50mm thick flooring cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work complete in all respect with in all leads & lifts as per direction and best satisfaction of Engineer-in-Charge.
Distempering (two coat ) with oil bound washable distemper of approved brand & manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortor droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge.
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt , dust and other foreign matters sand papering and stopping with readymixed paint other than white complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing pressed steel in frames of door, windows and clerestorey windows and other wrought framed, rammed and fixed in position complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge.
Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar wood complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing and fixing anodised Aluminium sliding door bolts with bolts and nuts screws etc. complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing and fixing anodised Aluminium tower bolts (barrel type) with screws etc.complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing ad fixing anodised Aluminium handles anodised colour and shade with necessary screws etc.complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing 40x3 mm iron hold fast 40 cm long including fixing to frame with 10cm dia bolts, nuts and wooden plugs and embending in CC block 30x10x15 cm 1:3:6 (1: cement :3 sand: 6 graded stone aggregate 20 mm nominal size) with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Laying, jointing and fixing of GMS tubes of following dia in walls, floors etc. including tube fittings and making the wall, floors etc. good with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Outlet Pipe, 150mm dia (MG)
Providing, supplying and fixing of Cast Iron Sluice Valve of following dia of Kirloskar/Leader make class PN-1.6 with flange table-5 conforming to IS-6392-1971 or latest with upto date ammendments complete i.e. welding of flange and fixing with nuts & bolts and gasket including complete process of fixing new valve by all means. The welding of flanges with pipe should be in double layer on the both faces of flanges including carriage of material complete job in all respect with in all leads and lifts as per direction and satisfaction of Engineer-in-Charge.
150mm dia
(Electrical items) Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group A.
Wiring for power plug with 2x4 sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 sqmm HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
ii) 2 x 4.00 Sq. mm.
Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
i) 2 x 1.50 Sq. mm.
Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, din-bar, detachable gland plates, blanking plate cable identification levels inter connections, phosphalized and power painted including earthing etc. as required
Supplying and errection of 6 Amp rating 10KA braling capacity 240 volts "C" curves miniature circuit breaker of following poles in the existing MCBDB complete with connecting etc as required.
Supplying and erection of following rating double pole 240 volts isolator in the exising MCBDB complete with connections, testing and commissioning etc. As required 40 Amp Cat A.
supplying and fixing of following rating double pole (single phase and neutral) 240 volts resiidual current circuit breaker (RCCB) having a senstivity current up to 300 miliampere in the existing MCBDB complete with connections testing and commissioning etc as required 40 Amp Cat A.
Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm) with 16/0.20mm twin twisted flexible cotten baided, copper cable including providing and fixing phenolic laminated seat cover on the fan box and earthing etc. as required.Ceiling fan 1200 mm sweep category A
Supplying and fixing plain P/holder with 16/0.20mm twin twisted flexible PVC insulated cotten braided copper cable.
Providing and fixing shock proof slim decorative extraded fixture with domestic electronic ballast suitable for 36 watt FTL (T8) complete with all the accessories (excluding the T-8 tube) connections, testing and commissioning etc as req. 1x36 watt FTL (T-8) Cat -A
Providing and fixing following type of CFL rod lighting luminairs epoxy black power coated seat steel housing with epoxy white powder coated XRCA sheet steel geartray clear a crylic cover aluminium reflector (but excluding the cost of CFL) complete with all accessories connections, testing and commissioning etc as required 1x85 watt CFL fixture.
Providing and fixing 85 watt CFL in existing fixture in all leads and lifts .
Nota Ram Contractor
Naagender Pal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .