CIvil Work

Name of Work :- Addition and Alteration to Additional Civil Judge Quarter at Dabhoi, Ta. Dabhoi,

BILL OF QUANTITIES

It. No. Description of Item Quantity Unit Rate in Figure Total

1 Providing , Arranging and fixing Vertical Sliding door unit (VSDU-8) of 1.00 No. 28349.69

size 900 mm x 450 mm x 1830 mm having back, sides and door to be

made from 0.7 mm (+ or - 0.07mm ) high yield strength CRCA sheet and

rest in 0.8mm ( + or - 0.08mm ) CRCA sheet of grade 'D' as per IS-513.

5 lever cam lock , plastic flush and recessed handle to be provided &

having 4 nos of adjustable full shelves of uniformly distributed load

capacity of minimum 40.00 kg and each shelf shall be placed such as A4

size Box File ( 85 w x 345 H X 285 D ) can be stored vertically on four

shelves and clear space above 5th shelf shall be 220 mm incld. all

necessary fixtures and fastening with. Whole unit shall be Epoxy polyster

powder coated of 50 micron thickness etc. complete as per drawing /

photographs & details and directed by Engineer In charge.

2 Providing and Fixing service Kitchen unit with of standard height made 4.56 Sqm. 22220.00

from calibrating water Proof plywood of various size (i.e. 25 mm,19 mm,

25mm, 12mm ,8 mm) and finish with seamless designer laminate of

mm thick outerside & 0.8 mm th linear inside With front shutter bidded

with flutted glass sliding door with Antique CP finish handle and Tendom

box with multiple ht level of partition for accesories(if any) ,multiple shelf

of glass for kitchen ware, items include all hardware i.e. hinges, soft

close channel, handle, Hydrualic Pump , screw, bangle stand, fevicol &

all misc) iteam to be executed as per architecture design, drwaing &

instructed as per engineer incharge. structure : 40mm, 25 mm, 19 mm

plywood (green, surya, sagun, aerolam, Duro or Equi.) Laminate :

Greenlam, Century, Meriolam Or Equi. Hardware : Hettich, Godrej, Haffle

or Equi. Mirror Unit : 6mm /5mm Flutted glass shutter & partion of 6mm

toughen glass eith all necessary Fittings and Fixtures.

3 Dining Table : Providing 25mm ply of Sheesham Wood 6 Seater Dining 1.00 No. 60600.00

Table Set Dimension: Table: Length (72 Inch), Width (36 Inch), Height

(30 Inch) and for Cusion Chair - Length (17 Inch) Width (17 Inch) Height

Upholstery :Cushion with pre moulded foam of 50-60 density and finished

As Per Directed By engineer in charge

4 Providing and Fixing TV unit with Back wall made of designer laminates 10.44 Sqm. 13041.12

and Veneer composition and finish with PU Polish support level wall

structure made from composition of 19 mm , 12 mm , 8 mm ply ply wood

Unit composition of 3 drawer made of MDF board finish with PU

Polishgrade plywood and other surface 1.00 mm thick laminate and

inside 0.8mm thick balancing laminate of approved shade , 1 open

Drawer finish by Flutted glass and all drawer sliding by Channel run on

Ebco or equi.with all necessary fixtures and fastening as including all

materials and labour etc. Complete as per drawing and instruction of

Engineer-in charge .

5 Providing and Arranging three seater wooden sofa made from Indian 1.00 No. 41465.55

teak wood with melamine polish.seat made from 100 mm thick

density foam with 25 mm thick supersoft HD covered for softness. seat

to be kept on high density nylon elastic belt inside Framing size 50 mm x

37 mm support armrest, legs and outer frame having size 80 mm x

37mm with inner brace between armrest and seat frame having size

mm x 50 mm as showing the photographs. Back 80 mm thick 40 density

foam with 12mm thick supersoft HD covered for softness. Seat and back

covered with high quality fabric approved shade and wooden armrest

Including all materials, Hardwares and labours etc. complete as per

drawing / photographs & detail and as directed by Engineer-in

charge.HOF MAKE : Coza size : 1900 mm x 750 mm x 750 mm (H)

6 Providing and Arranging two seater wooden sofa made from Indian teak 2.00 No. 36035.79

wood with melamine polish. Seat made from 100 mm thick 40 density

foam with 25 mm thick supersoft HD covered for softness. Seat to be

kept on High density nylon elastic belt inside. Framing 50 mm x 37 mm

support. Outer frame 80 mm x 37mm. Back made from 80 mm thick

density foam with 12mm thick supersoft HD covered for softness. Seat

and back covered with high quality fabric of approved shade (Basic Rate

Rs.400/ Rmt) and wooden armrest Including all materials and labour etc.

Complete as per drawing / photographs & detail and as directed by

Engineer-in charge.HOF MAKE : coza Size : 1320 mm x 750 mm x

It. No. Description of Item Quantity Unit Rate in Figure Total

7 Providing and Arranging tea table made from 37mm x 37 mm Indian 1.00 No. 5382.29

teakwood leg and top frame made from 37mmx 75mm Indian teakwood

having 18 mm thick Ply and 4mm thick Veneer with melamine polish and

0.8mm thick balancing laminate at bottom for shelf made with

surrounding Indian teakwood frame of size 37 mm x 12 mm. The top

having 12 mm thick glass with edge finish to be placed properly in groove

made. Surface to be finished with melamine polish including all materials

and labours etc. complete as per drawing and instruction of engineer-in

charge.Tea Table : size - 900mm x 600mm x 450mm

Rs. Four Lakhs, Fourty Five Thousand, Three Hundred Fourty One and Sixty Paisa Only

I/We am/are willing to carry out the work @ ______________ % ______________ percent

(should be written in figures and words) below / above, the estimated rates mentioned above, amount of

my/our tender works out as under :

Above all items of "Bill of Quantities" with Item Description, Unit, Qty, Rate & Amount have verified by me and

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 The contractor will have to submit the mix design for different grades of cement concrete and asphalt

at his own cost before execution as directed and to be approved from the engineer in charge.

Deputy Executive Engineer Executive Engineer

Dabhoi (R&B) Sub Division District (R & B) Division

Dabhoi Vadodara