UPHC Camperbazar

Amount

(Supply & Erection)

Supply of XLPE CABLE (HT) 3Cx70 sq.mm at work site

Supply of 11KV Gang Operated Switch (Polymeric type) at work site

Supply of 11 KV Drop out Switch DOF Polymeric 3ph at work site

Supply of M.S. ANGLE (65x65x6) mm Angle at work site

Supply of Channel 100x50x6mm (Galvanised) at work site

Supply of Channel 75x40x6mm (Galvanised) at work site

Supply of Wooden Plank at work site

Supply of 1/2 dia PVC pipe for earthing at work site

Supply of HDPE Pipe PE100 grade 110 mm outer Dia 12 Mtr Long at work site

Supply of Steel Almirah of size 72"x36"x18" with 4 (four) locker self of 18" height made by 22 gauge sheet including best quality paints.

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght- 1200mm / Sand (couhioning): Hieght-250mm, Width- 350mm/Protection: Double layer BricksUpto 120 sq. mm

Laying of one number additional PVC insulated andPVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trenchin one tier horizontal formation including excavation,sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-200mm, Hieght-1200mm / Sand(couhioning): Hieght-250mm, Width-200mm/ Protection: Double layer BricksUpto 120 sq. mm

Manually digging /driIIing horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 Mtr.Long 75 x40 x 40 x 6 mm ( Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,1.5 Mtr.Long 75 x40 x 40 x 6 mm ( Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.8 Mtr.Long 75 x40 x 40 x 6 mm (Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.8 Mtr.Long 100 x50 x 50 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.8 Mtr.Long 100 x50 x 50 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of 11KV Pin insulator along with Pin.

Erection of 11KV Single Disc insulator set along with necessary fittings

Earthing with G.I pipe 2.5mtr. Long and 40mm dia including excavation, refilling with alternate layer of salt & Charcoal as per drawing including supply of G.I.Pipe, Salt & Charcoal, GI wire, nuts &bolts, etc. as required.

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Laying and Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting and binding etc. Complete as required.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of Two nos including necessary connection complete as per technical specification. (Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos including necessary connection complete as per technical specification.(Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 1J/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required

Erection of 11mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Carriage of 11.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as requireda) Upto the lead range 25 KMi) For maximum 6 (six) poles From MMD Store to work site

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tie up of Pipe with pole by the help MS Flat Clamp (excluding cost of Clamp and Nut&Bolts) as required Up to 400 sq. mm including fitting fixing of extra cable at pole top.

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating

Providing of Pre-cast cement concretecableidentification route marker (1 cement: 2 coarse sand4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker snail be embossed "DANGERS: TSECL,ELECTRIC POWER CABLE” with Black colour letter {both side) The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Grouting of Steel Tubular Pole of ratio 1:2:4 (1cement:2 river sand:4 Jhama brick Aggregate of 20mm. Nominal size) including supply of cement, sand and brick aggregate. Complete with excavation, refilling of each, ramming along with centering and shuttering as required

Carriage of materials such as Cable,AAC, AAAC, ACSR,G.I,Wire,Cross-Arm,Stay set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM From MMD Store to Sub Division Store

Supply & Erection of S/S Hard drawn Fencing 3 mtr x 2 mtr x 1 mtr with MS Angle support as per Specification

Supply of heavy duty Plastic chair with arm of Sandal wood colour (Nilkamal / RFL / Supreme make)

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

SAJAL DAS (BID ID -177151)