ADDN/ALTN OF BLDG NO. P-350 (1-4), SINGLE JCO LIVING ACCN OF 14 INF DIV SIG REGT AT CLEMENT TOWN, DEHRADUN AND PROVN OF WOODEN FLOORING AND ROOF VENTILATOR IN BADMINTON COURT AT NHO DEHRADUN

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed.

M&L for joint free Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:4, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:3, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles complete all as specified and directed.

M&L for coloured vitrified light shade tiles of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed

All as per item No 4 above but as in skirting/dado over 10mm thick cement plaster in CM 1:3.

M&L dura stone tiles of size 300x300x8mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

All as per item No. 6 above but as in skirting/dado over 10mm thick cement plaster in CM 1:3. complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc to receive tiles complete all as specified and directed

M & L of 18-20 mm thick green marble work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15 mm thick screed bed in cement mortar 1:4 incl full round bull nosing complete all as specified and directed.

All as per item No 9 above but as in riser over 10mm thick cement plaster in CM 1:3. complete all as specified and directed.

Demolition of cement concrete (unreinforced) above ground floors and paving n.exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level)complete all as specified and directed..

M & L 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or conc surfaces and finished even & fair complete all as specified.(Note : water proofing compound paid separately)

Supply only liquid water proofing compound complete all as specified and directed

M& L for two coats of elastomeric compound ie super latex of Dr Fixit or equavalent on concrete surfaces after cleaning of sunken surface (vertical and horizontal) by removing all the loose mortar, laitance, dirt, dust etc by chiesel hammer/wire brush anc air blower machine complete all as specified and directed

M & L for plain cement concrete Nominal mix (1:5:10) type E2(using 40 mm graded brick aggregate) as in sunken floor complete all as specified and directed

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 75mm thick PCC (1:2:4) type B2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 (using 40mm graded aggregate) 75 mm thick as in sub bases of floor complete all as specified and directed by Engineer in Charge .

M&L cement concrete 1:3:6 type C-1 (using 40mm graded aggregate) 75 mm thick as in plinth protection/hard standing surface finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge .

M & L Cement concrete type B2, 1:2:4 (40MM graded aggregate for surface channels and drains complete all as specified.

Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement.Complete all as specified and directed by Engineer in Charge .

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces incl mixing with Water proofing compound finishing even and smooth without using extra cement complete all as specified and as directed . (Note : water proofing compound paid separately)

M&L rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement). Complete all as specified and directed

M&L for preparation of newly plastered surface of internal wall by application of 1mm wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L for preparation of newly plastered surface of external wall by application of 1mm wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L for two coats of oil bound distember by application of 1mm wall care putty on ceiling incl preparation of newly plastered surfaces. complete all as specified and directed by Engr In Charge.

Taking up or down steel tubing and connection of 15mm dia, incl cleaning for refixing or removal to store complete all as specified and directed

Taking up or down steel tubing and connection of 20mm dia, incl cleaning for refixing or removal to store complete all as specified and directed

S & F 15mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S & F 20mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S & F 20mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank including dismantle of old water tank and removing from site. complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes, ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors/walls.complete all as specified and directed.

S & F 75 in repair mm bore PVC (SWR) Soil, waste and vent pipes ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors.complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement ( ISI Marked) . complete all as specified and directed.

S&F in repair PVC (SWR) junction single (Single T) radius 110mm bore with access door complete all as specified and directed.

S&F in repair PVC bend of radius 110mm bore with access door complete all as specified and directed.

S&Fin repair PVC bendof radius 75mm bore with access door complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including waste pipe,coupling (min weight 32mm-45gms cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete complete all as specified and directed.

Supply & fix wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes complete all as specified and directed .

S&F 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed.

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed.

S&F in repairs angle stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated (ISI Marked) complete all as specified and directed.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.

S & F in repair CP shower rose with or without swivel joints of 125 mm size with shower arm including fixing to steel pipe or union complete all as specified and directed.

S&F in repair CP Grating doom 125mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed.

S & F cast copper alloy, chromium plated Towel Rail 20 mm dia, D-type, 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats Complete all as specified and directed.

S&F CP toilet paper holder with flat recessed type stainless steel fixed to wall with CP brass screw complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail

S & F corner self 300mm radius of 10mm thick toughened glass with CP railing with bracket S & Fixed with brass screw complete all as specified and directed .

S&F in repair SS soap dish fixed to wall with screw complete all as specified and directed.

S & F 75mm Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, inclu nut and bolts and securing ends of stays to wall or roof

S & F 100mm Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, inclu nut and bolts and securing ends of stays to wall or roof

Taking down existing tar felt and plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises and M&L 15mm thick cement plaster (1:4) for finshing existing surface and over laying water proofing treatment on top surfaces of roof after cleaning of roof surfaces with water and filling cracks with sealing compound and dried top surface of roof. Apply a coat of cold bituminous primer @ 0.30 liter per Sqm and followed by a layer of APP polymer modified five layered water proofing membrane 3mm thick weight not less than 3.60 Kg/Sqm with non woven polyester reinforcement (weight not less than 150 gm/Sqm) of M/s STP Texsa Ltd or M/s IWL (I) Ltd or M/s STP Ltd. The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm and a layer of bituminous aluminum paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane, Application including overlap, side lap shall be provided as per manufacturer instructions and as specified and directed The side lap and end laps should have overlap of 75mm to 100mm and should be thermo fused together so that it forms a single sheet through out complete all as specified and directed by Engr-in-Charge

M & L 50 mm +/- 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed withliquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding to receive roof treatment complete all as specified and directed.”complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item No.64 above but exc 1.50 Sqm and n.exc 4.00 Sqm each.

Providing and fixing Three shutter Sliding Windows made of Pre Painted Steel and Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Three Tracks size of 107 mm x 44 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with three integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminum 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window system at site using anchor fasteners, inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work.

Providing & fixing windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters and 20 mm provision for guard bars/ grills. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed , handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 110mm pitch, complete for finished item of work including of all taxes

M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed.

M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.

S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge

S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed

S&F SS butt hinges 100mm long medium weight cold rolled mild steel complete all as specified and directed.

S&F SS barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F SS sliding door bolt 250mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F SS bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F MS helical door spring fixed in iron/wooden surface 300mm long including roller and roller plate complete all as specified and directed.

S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed

S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet/cupboards, shelves etc. complete as per manufacturer’s instructions complete all as specified and directed

S&F magnet catcher to wooden frame work complete all as specified and directed.

S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 30 mm . (ISI Marked) Complete all as specified and directed

S & F Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod Complete all as specified and directed by Engineer in Charge .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in beams and roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed

S & F welded steel wire fabric wt not less than n exc 4 Kg per Sqm complete to steel member complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E 165 includind dismantling existing mild steelwork in any position, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome complete all as specified and directed.

M&L for preparation of old surface on ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying 1mm wall care putty and one coat acrylic distemper (oil emulsion ) on old decorated surfaces using rollers complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in any type of soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc and getting out complete all as specified and directed

Excavation over areas, n. exc 1.5m deep and getting out in any type of soil complete all as specified and directed

Excavation over areas, exc 1.5m deep but n. exc 3m deep and getting out in any type of soil complete all as specified and directed

M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed

M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, complete all as specified and directed

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and directed

M&l for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in coping, filling and mass concrete complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls, beams and columns complete all as specified and directed

M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in manhole covers set in CM 1:4 complete all as specified and as directed by Engr-in-Charge

M&L use and waste form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizontal or sloping) rough finished flat surface complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F PVC (SWR) 75mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge.

M&L for providing 40 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floor finished even and smooth complete all as specified and directed.

S&F glass dividing strips, 3 m thick and 38 mm width of strip inserted in position conform to design complete all as specified and directed.

M&L for post anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart incl drilling and plugging 12 mm dia holes with cementy mortar 1:2 ( 1 cement: 2 sand) to match existing floor complete all as specified and directed

M&L for post anti termite treatment along the external wall below concrete or masonary apron using chemeical emulsion @ 2.25 litres per linear meter incl drilling and plugging holes etc in apron complete all as specified and directed.

M&L for badminton court with maple wood flooring with the following specifications: Surface board: Made of kiln seasoned (Moisture content not more than 14% ), treated Maple woodfinished with 21 mm thick, 57 to 83 mm wide and in random length in tongue and groove shape. The edge of the boards will have a finger lock groove and the bottom side with air pass groove and treated with anti termite and water resistant lacquer. The under frame: The under frame made of commercial quality pine wood runners of 70mmx38mm, treated with anti termite solution and fixed on the bottom side with 10 mm thick air cushioned pads, stapled through the two wings at 350mm x350 mm. Installation:Sub floor treated with a vapour barrier (Polythene sheet 50 micron) to be placed on the sub floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350 mm distance at one direction. The surface board to be screwed to runner through the tongue only and will lock the screwed tongue through goove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area/ walls. Finishing: After laying the flooring the floor boards shall be machine sanded and levelled to a uniform surface and applied a thin coat of water based/ polyurathene lacquer polish on the surface. Marking: Game marking lines as per sports authority standards to be marked before applying final finish coat. NOTE: (i) Work shall be got executed through specialist agency and contractor shall submit a MoU between contractor and agency executing the work. The gurantte for above work shall be of 02 years and contractor shall submit a back up guratee from executing agency for the above work.

Supply only movable Badminton poles (set of 02 poles) with Garware net and fine quality PU paint complet all as specified and directed.

Taking down shutters of any description (WPC & Aluminium) exc 1 sqm and n exc 2 sqm each and refixing in same opening after execution of work incl necessary easing or adjusting complete all as specified and directed

Supply and fix stainless steel Turbo roof ventilators comparising of throat dia 610 mm ,turbine dia 710 mm and neck dia 550 mm, No of vanes not less than 42, dia of shaft 12 mm weight not less than 4.8 kg each mounted over and incl a polycarbonate base plate of size 1.06x1.70 m and polycarbonate sheet of width equal to existing width of roof sheet and length 1.70 m thickness not less than 2 mm. Material of top cover & vanes : Stainless steel, Material of rivets: Aluminium, Revolution mechanism: Double jet sealed ball bearing complete all as specified and directed

Dismantling plain or corrugated steel sheeting of any gauge, thickness incl Nainital or similar pattern roof covering complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as directed and specified.

All as per item No. 123 above but except sheeting (any thickness)

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as directed and specified.

M&L for preparation of old plastered surfaces and applying two coats of acrylic distemper (Ist quality) having VOC content less than 50 gms/ ltr of approved mnufacturer as per manugfacturer specifications over a coat of wall putty to have a smooth wall surface complete all as specified and directed.

Preparation of old painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

Preparation of old painted surfaces of any description n exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

Disconnecting the electrification and taking down DBs (any type of SPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by EIC. Note - Temporary power supply shall be provided by contractor.

Taking down U/S submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

Material & Labour for following type Point Wiring controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit MMS ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates).

One light point controlled by one switch.

One ceiling fan point controlled by one switch.

One exhaust fan pointcontrolled by one switch.

One 3 pin socket outlet 5 Amps on the same board.

One 3 pin socket out let 5 Amps on the independent board.

One bell point controlled by one bell push

All as per Item No. 132 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by EIC.

S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed.

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete including fixing of 9/10 watt LED bulb all as specified.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge.

Supply and fixing step socket type modular fan regulator 120/280 V , 100Watt all as specified and as directed.

S & F Switch Modular bell push single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing door bell ding dong type suitable for 230 Volts, AC, 230 Volts, single pole.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 100 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCBs SPN 32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCB SP, 5-32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S&F DB Power unit MCB protected socket with sheet steel enclosure 20 Amp combo incl 16 amp plug top indicator type for A/C or Geyser

M&L for sub-main wiring (concealed) with two single core 6 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 20 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

S&F Oval shape Bulk head Edge -lit LED fitting comprising with high brightness LED 10 WATT,IP-67 protection all as directed.

S & F decorative type Glanze Wall light inclding 7/9 watt LED (B22) with all necessary fittings complete all as specifed and directed.

M & L for LED Bldg Security light Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with st lt bracket ,made out of 1.0 mt long,32mm dia incd clamps 40x6mm flat incl painting as directed by Engr-in-charge

S& F 10 Watt LED light fitting mirror type with high out put diffuser 2 feet 220 VAC decorative type complete all accessories with connecting suitable size of 3 core flexible cable as specified and as directed.

Taking down ceiling fan from existing building and again refixing the same ceiling fan after oiling / greasing complete, connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan.

S&F Electric Water heater,Shock-Resistance & Rust-proof engineering thermoplastic body and heating element up to 2KW , Cap :25 Ltr , BEE 5 Star rated complete with all accessories such as safety valve ,thermostate,NRV ,Connection piece complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 volts, 50 Hz, 1200 RPM, copper winding of sweep 250 mm complete all as specified and directed.

S & F vertical load line in sheet metal enclosures MCCB TPN DB's with double door for incorporating MCCB as incomer and MCBs SP/SPN as outgooing , IP-43 , TPN 4 way with 200 amps rated busbar, 440 volts, as per IS-8623 including taking out old UNSV DB and making good the disturbed surface of wall and match with the existing surface compelte all as specified and as directed. ( Note- MCCB 3 pole 63 amps as main incomer will be included in quoted rate)

M & L for Earthing complete with galvanised steel pipe electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt,GI Pipes ,GI wire up to 7.5 mt shall be deemed included in the unit rate for earthing all as specified and as directed by Engr-in-charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

JBN CONSTRUCTION (BID ID -3337330)

sweety pest control (BID ID -3345856)