Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC MEERA SADAN ROAD NO 3 NEAR WAXPOL FACTORY ANAND BIHAR BOOTY MORE JHARKHAND | JHARKHAND | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹25.5 L+₹1.5 L (6.16%)Rejected-AOC | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹25.9 L+₹1.9 L (8.11%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹26.9 L+₹2.9 L (12.1%)Rejected-AOC | L4 | Rejected-AOC Not being L1 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
WELCOME MAINTENANCE AND PERIODICAL SERVICES INCLUDING REPAIRS TO PLASTER TO BUILDINGS OFFICERS MD ACCN AT NCB NAVY HOUSE CE COMPLEX UNDER AGE BR I OF GE ND VISAKHAPATNAM
2023_MES_630265_1
8305GEND
Open Tender
Civil Works
Item Rate
240 days
VISAKHAPATNAM
As per NIT
8 documents required · 8 mandatory
₹500
g
₹64,000
Yes
28 Feb 2024
30 Nov 2023
30 Dec 2023
1 Dec 2023
28 Dec 2023
14 Dec 2023
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site , see the buildings and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and applying one coat of white wash by using auto roller complete all as specified and directed .
Preparing old surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying one coat of white wash by using auto roller complete all as specified and directed .
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and applying one coat of oil bound distemper by using Auto roller or Airless sprayer machine complete all as specified and directed .
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and applying Two coats of oil bound distemper by using Auto roller or Airless sprayer machine complete all as specified and directed .
Providing & applying plaster of paris putty of 2 mm thickness over plaster surfaces by using smart painting wequipments to prepare the surface even and smooth complete all as specified and as directed.
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
Preparing old decorated surfaces of walls by using vaccume based hand held or long handle sander machine and applying one coat of plastic emulsion paint by using auto roller or airless sprayer machine complete all as specified and directed
Preparing old decorated surfaces of walls by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of cement based paint by using auto roller or airless sprayer machine complete all as specified and directed .
Prepration of old decorated wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machiner complete all as specified and directed
Complete removal of existing treatment on wall and prepration of surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) over a coat of suitable primer by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed
Complete removal of existing treatment on wall and prepration of surface by using vaccume based hand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Preparing old decorated surfaces of walls by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of cement based paint by using auto roller or airless sprayer machine complete all as specified and directed .
M & L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc., in apron complete all as specified and directed
M&L for providing and injecting chemical emulsion for Anti Termite treatment at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 ltr per hole by drilling 6mm dia at a downward angle 45 degree at 150 mm centre to centre complete all as specified and directed
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and width of apparture 1.40 mm and fixed width tinned stacks or gaivanised wire staples using old or new beading complete all as specified and as directed including taking out old rusted wire mesh complete all as specified and directed.
Powder coated fancy type aluminium curtain rod 25mm dia including PVC rings @ 100mm C/C with globe type brackets matching to cutain rod complete all as specified and directed
S & F in repairs 4 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
Brick work with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Rendering 10 mm thick on fair faces of brick/concrete surfaces in Cement mortar 1:6, finished fair and even with out using extra cement complete all as specified and directed.
M&L Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately).
Supply only Integral water proofing compound of approved quality complete all as specified and directed
Prepration of new plastered surfaces by using vaccume based hand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Preparing newly plastered surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying Three coats of white wash complete all as specified and directed .
Preparing newly plastered surfaces of walls by using vaccume based hand held or long handle sander machine and applying Two coats of cement based paint over a coat of white wash using auto roller complete all as specified and directed .
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed .
S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.
Supply & Fixing in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed.
S&F in repairs standard PVC waste pipe 32mm dia complete all as specified and directed.
S&F in repairs standard PVC flushing pipe 38/40mm dia, for Urinals/sinks complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. n exc 250 ltrs complete all as specified and directed
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exc 500 ltrs and n exc 1000 Ltrs complete all as specified and directed
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity including taking down old tank complete all as specified and directed..
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity including taking down old tank complete all as specified and directed..
S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low/height level white inlet ball valve float and handle including brackets complete all as specified and directed.
S & F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs PVC connection 15 mm with PTMT nuts of length 450 mm including necessary washers complete all as specified and directed.
M & L in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L for 15mm thick screed bed or bedding layer for laying sharp finishes in CM 1:6 complete all as specified and directed
M & L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or dark coloured cement to match complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or Coloured cement to match complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or Coloured cement to match complete all as specified and directed.
Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and directed.
M & L for coloured glazed ceramic tiles of 300 x 450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white coloured cement to match
M & L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, in skirting, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or dark coloured cement to match complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in skirting, area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or Coloured cement to match complete all as specified and directed.
M&L 18/20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of grey complete all as specified and directed
Removing plants / herbs grown on walls/junctions with roots using herbicide chemical of approved quality as approved by GE and of existing brick and concerte in high raised building.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
S & F in repairs 15 mm bore Stop valves/angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs Two way bib tap Chromium plated 15 mm Dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed
S & F Vitreous Ware wash down water closet (Pedestal), white and fixed in repairs all as specified and directed.
S&F in repairs plastic water closet seat cover,black,closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and directed
S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.
Taking down of existing Aluminium window frame with shutters of any size and taking down of existing Aluminum wire mesh and fixing with new aluminium wiremesh of 0.45mm dia of wire and averagev aperture is 1.40mm in repairs and re fixing the Aluminium window in same opening with necessary fixing arrangements complete all as specified and directed
Corner glass shelves 225mm radious,6mm thick as per sample radious for bath room, fixed on suitable support complete all as specified and directed
Glass shelves 45cm long, 125 mm wide, 6mm thick fixed on suitable support complete all as specified and directed
S&F CP health faucet including one mtr length conncting pipe complete all as specified and directed
PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved patterns and design. complete all as specified and directed
Taking down 15mm dia G.I. tubing and connections incl. cleaning for refixing or removal to store complete all as specified and directed
S&F 3-layer PP-R P o l y p r o p y l e n e random copolymer)pipes 20 mm outer dia SDR 7.4 & SDR 11 UV stablised laid & concealed in walls including bends, elbows, unions etc, laid on walls for vertical stacks including chasing the wall and making good complete all as specified and directed
50 mm dia Low density polyet-hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc including taking down old pipe complete all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed
Taking down Chowkats or frames exceeding 1.5 Sq. M and n exc 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and directed
Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed
Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed
S & F 35 mm thick Second class hard wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board complete all as specified and directed.
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed.
Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and width of apparture 1.40 mm and fixed width tinned stacks or gaivanised wire staples using old or new beading complete all as specified and as directed by E-in-charge including taking out old rusted wire mesh.
S&F mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling hole etc. complete all as specified and directed
PCC 1:2:4 type B0 (12.5mm graded crushed stone aggregate) as in hold fast & filling in plates of trusses etc all as specified and directed.
150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
75mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
S&F 100 mm stainless steel butt hinges,fixed with stainless steel screws complete all as specified and directed .
150 mml ong Extruded aluminium alloy handles, fabricated type., anodised all as specified and directed
M&L Preparation of new or previously un treated wood and wood based surfaces of any description using sander machine, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer using auto roller or airless sprayer machine complete all as specified and directed.
S&F stainless steel plate rack of size 750x600x200mm x 0.8 mm thick complete all as specified and directed
S&F in repair 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed
S & F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed in repairs complete all as specified and directed
S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor in repairs of length 150 mm complete all as specified and directed
S & F in repairs Godrej Mortice lock, vertical type, size 100 mm 4 levers include for escutcheon plates and two keys complete all as specified and directed.
S & F in repairs Aluminium anodised grill of make "Deco grill" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws complete all as specified and directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed
S &F of Anodised aluminium snap grid frame work of size 605 X605 mm for false ceiling complete all as specified and directed
Hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long complete all as specified and directed.
Sri Venkateswara Constructions
RAJASHEKHAR ENTERPRISES
SSV CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .