Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.1 L+₹1.1 L (2.83%)Rejected-Finance | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹41.0 L+₹2.0 L (5.14%)Rejected-Finance | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹41.2 L+₹2.2 L (5.68%)Rejected-Finance | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | L5₹41.4 L+₹2.5 L (6.30%)Rejected-Finance OLD HASIMARA PO HASIMARA DISTT ALIIPURDUAR WB PIN 735215 | HASIMARA | ALIPURDUAR | WEST BENGAL | 735215 | L5 | Rejected-Finance OTHER THEN LOWEST BIDDER |
Tender Value
₹36.8 L
EMD Value
₹73,600
Closing Date
29 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
SPL REPAIR/REPLACEMNT FOR CGI SHEETS OF BLDG NO T-52, T-53 and T-55 OF 231 FD WKSP COY EME BN, ADN/ALTN OF OR LIVING T-282 (16X7) AT 7 KUMAON AND PROVN OF JAFFERY WALL FROM T-277 TOBLDG NO T-283 (HQ) COY AT 7 KUMAON AT HASIMARA MIL STN UNDER G
2022_MES_556950_5
8528/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹73,600
Yes
9 Jan 2023
16 Dec 2022
31 Dec 2022
16 Dec 2022
29 Dec 2022
22 Dec 2022
Amount
Schedule 'A'
Dismantling of plain or corrugated steel or AC sheeting, any gauge, or any thickness as in roof coverings including nainital or similar pattern including Ridges/Valley/Hips/ Eaves board complete all as specified and directed.
M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed.
All as per item No- 27 here- in- above but Plain sheets as in ridges/ hips / valley/Eaves and Eaves board - ditto --
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate 100 mm thick as in sub base complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L Broken stone or boulders hardcore of gauge exceeding 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for mild steel work in tubular trusses and tubular posts including special shaped washer duly welded, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc. or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed
Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed
Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed
M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for fly ash brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for rendering 20mm thick on brick wall or concrete surface in cement mortar (1:4) consisting two layers, top layer of 10mm thick mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
M&L for preparation of newly plastered surfaces wall and applying two coats of cement base paintcomplete all as specified and directed.
M&L for preparation of new surface of steel and iron of any discription, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for PCC 1:2:4 Type B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, retaining wall, pillers, columns boundary pillar etc complete all as specified and directed.
Excavating in soft/loose soil for post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed
Dismantling of timber scantling 40 sq cm and over in section, in any position as in framed work complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed
Demolition of reed, lathing, single or double,including battens and plaster or chicken wire lathing complete all as specified and directed.
Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.
Taking down chowkhats or frames with shutters (without talking off shutters from the freme) area n.exc 1.50 each and removing from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 and n.exc 4 Sqm each and removing from site complete all as specified and directed.
M&L for providing RCC (Nominal mix) 1:2:4 using 20mm graded stone aggregate as in Rafts, Footings,Foundation, plinth beams, Braces for columns etc complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
Form work to sides of concrete foundation ,footings, bases of columns, raft and raft beams sides and soffits (if any )of foundation and plinth beams for flat rough finished concrete surface complete all as specified and directed.
M&L for providing RCC (Nominal mix) 1:2:4 using 20mm graded stone aggregate as in Beams,Cantilevers,Lintels etc and the like complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
Use and waste of form work to soffits of floor or roof beam , beam haunching, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished surfaces complete all as specified and directed.
M&L for RCC (Nominal mix)1:2:4 using 20 mm graded stone aggregate as in chajjas and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.
Form work to chullah hood, chajjas, troughs and similar items including edges etc for rough finished flat concrete surface complete all as specified and directed.
M&L for TMT bars 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.
M&L rendering 10 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.
M&L for mild steel work Hollow section square/rectingular as in roof trusses, purlin , rail etc , complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and as directed.
S&F for Mild steel plates (Plain or chequered) channels,square cut or notched,forming holes with rivetted,bolted or welded attachment conforming to Fe-410-W (Grade E-250) quality A complete all as specified and as directed.
S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, Diameter of shank 11 to 15 mm complete all as specified and directed
S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.
M&L for MS flat iron bent to shape, holes drilled etc. complete as in wind ties etc including one coat of red oxide paint complete all as specified and directed.
S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm of approved texture and finished complete with two coats of oil based distemper over a coat of alkali resistance primer on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
Demolition of cement concrete un reinforced in ground floor and paving n. exc 15cm thick (below or above ground level) complete all as specified and directed.
S&F joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.
S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE: The quoted unit rate under this item shall deemed to be include one shop coat of primer.
M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.
S&F 35mm thick factory made, 2nd class hard wood, plain framed, factory made panelled shutter ( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board Timber flat on both faces, ( feather edged)the size of rail and styles as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F of 2nd class hardwood factory made 30 mm thick, glazed and skeleton door shutters, open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.23 (a) and fitted to chowkats complete all as specified and directed .
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, etc. complete with glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.
S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, etc. complete with out glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.
S & F Mild steel work in framed work such as in gates,grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F Harrison rails (curtain), mild steel, chromium plated with fixing brackets stops, rollers etc complete all as specified and directed
S&F 150mm long MS stove enamelled black finished barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 250mm long MS stove enamelled black finished, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F 150mm size Aluminium handle,cast type, anodised, fixed with screws complete all as specified and directed.
S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick length 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.
M&L for preparing of newly plastered surfaces of wall including cornices etc by brooming down applying two coats of antifungal exterior acrylic emulsion paint over a coat of acrylic primer over one coat of wall care putty complete all as specified and directed.
M&L for preparation of newly plastered surfaces wall and applying two coats of oil emulsion Distemper over one coat of cement base putty complete all as specified and directed.
M&L for preparation of newly wood or wood base materials of any description, not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of Pink primer complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate 40 mm thick as in ( Louvered and jalli) laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for Precast cement concrete 1:2:4 type B1 using (20 mm graded stone aggregate) lintel up to 1.5 m clear span , cill , steps,copping,kerbs, landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.
M&L for sand filling under floor/cable floor floor or in foundations including watering and consolidation complete all as specified and directed
INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
M&L point wiring complete with FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One socket out let 5/6 amps point on the same board
(d) One socket out let 5/6 amps point on the independent board
All as per item No104 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way all as specified.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
M & L for lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
S & F deluxe fan Electronic regulator AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S & F Wall mounted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed.
S&F High Power LED street light fitting ,system wattage-35 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV built in surge protection device using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.
Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, and regulators, etc. all as pecified and as directed
Supply and fixing LED light fitting mirror type 9/10 Watt with high with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
S&F MCB triple pole & neutral 40 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & neutral 6 to 32 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
M&L for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soilwith and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed.
S&F sub main wiring concelled type with single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS 694 of size 4sqmm nominal cross sectional area,1100 v grade and two run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits and fittings,complete including taking down of old sub main wiring all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
S&F street light bracket, made out of GI pipe medium grade) 25mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed.
S&F and testing PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 16 sqmm 4 core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed
M&L for GI tubing 40 mm bore ,light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.
M/S ROY ENTERPRISE
M/S. JOGINDER KUMAR GOYAL
M/S RATHIN ENTERPRISES
M/S BIJAY KUMAR SHIVA
M/S ASHOK ENTERPRISE
M/S. KUMAR CONSTRUCTION CO.
M/S ANIL KUMAR BAUL
Bidder Name
BHARAT ELECTRIC
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .